Matco Tools Megajump Manual page 5

Package Contents:
• Jump Starter
• Jumper cable with smart clamps
• (2) USB to Micro-USB charging chords
• Dual USB AC wall charger
• Dual USB DC car charger (input)
• 12V DC to Dual USB Adapter
• USB pigtail
• User manual
• Carrying case
1.LED Flash Light
2.Jump Start Socket
3.12V/10A Output
4.LED Panel Light
5.Power Button
6.Charge Indicator
7.Dual 5V 2.1A Output
8.Dual 5V 2.1A Input
Capacity
Start Current
Peak Current
Charging Port Output
Input
Size
Weight
Note: Please be advised that this device will not charge devices with input currents lower than
80mA, including some Bluetooth and GPS devices.
How to Charge Jump Starter
1. Plug both the Micro USB cables into the unit's input ports.
2. Insert the other end of the USB cables into:
(A) Included AC adaptor connected to the wall socket.
(B) Two powered USB computer ports.
(C) Included DC adaptor socket of cigarette lighter.
The unit will automatically begin to charge and will turn off when the battery of the jump
starter is fully charged.
1
2
3
30000mAh/111Wh
800 0 A
1800A
5V/2.1A (min 80mA),12V/10A
5V/2.1A(max)
8.75" x 7.75" x 2.75"
4 lbs.
Page 5
4
5
6
7
8