To Display The Photo Frame On The Wall - Sony S-Frame DPF-E710 Operating Instructions Manual

PNotes
• Use screws suitable for the quality
of the material of the wall. The
screws may be damaged,
depending on the type of material
used in the wall. Set the screws in
a pillar or stud in the wall.
• When you want to re-insert the
memory card, remove the photo
frame from the wall, then eject and
re-insert the memory card while
the photo frame is placed on a
stable surface.
• Remove the stand when you hang
the photo frame on the wall.
• Connect the DC cable of the AC
adaptor to the photo frame and
hang the photo frame on the wall.
Then connect the AC adaptor to
the wall outlet.
• We take no responsibility for any
accidents or damage caused by
defects of attachment, misuse, or
natural disasters, etc.
GB
10

To display the photo frame on the wall

1
Prepare screws (not supplied) suitable for the screw
holes on the rear panel.
More than 25mm
10mm
Holes for hanging
the unit on the wall
2
Screw the screws (not supplied) into the wall.
Be sure the screws (not supplied) protrude between 2.5 to 3mm
from the surface of the wall.
Between
2.5mm to 3mm
3
Hang the photo frame on the wall by fitting the hole on
the rear panel to the screws on the wall.
4mm
5mm