Table of Contents
Advertisement
After finishing the basic connection configuration, you can use its basic function. In order
to satisfy individuation service requirements, this charter provides the user parameter
modification and individuation configuration description.
3.1 Login
The device is configured by the web interface. The following steps will enable you to login:
1
、
Conform "2.2 Quick Installation" to install;
2
、
The device default IP is 192.168.1.1;
3
、
Open your web browser, type the device IP in address bar;
4
、
Entry of the user name and password will be prompted. Enter the default login user name
and password.
By default, there are two user levels for management. Administration level user name is
"admin", password is "admin" . Normal level user name is "user", password is "user".
3.2 Status
This part shows the main information of product.
3.2.1 Device Information
This page shows the device basic information, such as Device Model, Device ID, Hardware
1GE+WIFI EPON ONU USER MANUAL
Chapter 3 Configuration
Figure 3-1: Login
Page 7
- Quick Links:
- Login
- Wlan Configuration
- Wan Access Configuration
Hide quick links:
Advertisement
Table of Contents
