Pictbridge Compliant Printer - Sony W55 Handbook

Troubleshooting
When you print images at a shop, images can be printed with the date if you ask them to do so.
•

PictBridge compliant printer

A connection cannot be established.
The camera cannot be connected directly to a printer that is not compliant with the PictBridge
•
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
Check that the printer is turned on and can be connected to the camera.
•
Set [USB Connect] to [PictBridge] in the
•
Disconnect and connect the cable for multi-use terminal (DSC-W55) or the USB cable (DSC-
•
W35) again. If an error message is indicated on the printer, refer to the operating instructions
supplied with the printer.
Cannot print images.
Check that the camera and the printer are properly connected using the cable for multi-use
•
terminal (DSC-W55) or the USB cable (DSC-W35).
Turn on the printer. For further information, refer to the operating instructions supplied with
•
the printer.
If you select [Exit] during printing, images may not be printed. Disconnect and connect the
•
cable for multi-use terminal (DSC-W55) or the USB cable (DSC-W35) again. If you still
cannot print your images, disconnect the cable, turn the printer off and then on, then connect
the cable again.
Movies cannot be printed.
•
Images shot using cameras other than this camera or images modified with a computer may
•
not be printed.
Printing is canceled.
Confirm that you have disconnected the cable for multi-use terminal (DSC-W55) or the USB
•
cable (DSC-W35) before the
Cannot insert the date or print images in the index mode.
The printer does not provide these functions. Consult the printer manufacturer as to whether
•
the printer provides these functions or not.
The date may not be inserted in the index mode depending on the printer. Consult the printer
•
manufacturer.
"---- -- --" is printed on the date-inserted part of the image.
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
•
to [Off] and print the image again (page 85).
Cannot select the print size.
Consult the printer manufacturer as to whether the printer can provide the desired size.
•
98
(Setup) menu (page 59).
(PictBridge Connecting) mark disappears.