Toyota Tacoma 2019 Quick Reference Manual page 37

LANE DEPARTURE ALERT (CONTINUED)
The LDA function
switched to the driving assist system information screen.
(1) The system displays solid white lines on the LDA indicator when visible lane
markers on the road are detected. A side flashes orange to alert the driver when
the vehicle deviates from its lane.
(2) The system displays outlines on the LDA indicator when lane markers on the
road are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
ADJUSTING LDA ALERT SENSITIVITY
The driver can adjust the sensitivity of the LDA (warning) function from the
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
(1) Press "SETUP" or "APPS" switches on the multimedia system.
If you have Entune AudIo Plus, select "Setup" on the "Apps" screen.
(2) Select "Vehicle" on the "Setup" screen.
(3) Select "Vehicle Customization" on the "Vehicle Settings" screen.
(4) Choose a category to display the settings.
(5) Select the setting to be changed.
(6) Select "+" or "-" to choose the desired level, then select "OK."
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
displays when the Multi-Information Display (MID) is
35