QIWU iGPSPORT iGS10 User Manual page 8

9. SETTING TIME ZONE (SETTING MODE E3)
Default time zone: UTC/GMT+08:00.
Steps:
1) Hold right button more than 2 seconds to enter the setting mode.
2) right button
Select
3) Select left button to enter E3 mode when E3 is flashing.
4)
Select left button to change digits of hour and minute, select
value.
5)
Hold right button more than 2 seconds to save and exit.
Note:
The setting will be automatically saved if no operation in
10. SETTING METRIC AND IMPERIAL UNITS (SETTING MODE E4)
Default unit: metric (kilometer)
Steps:
1) Hold right button more than 2 seconds to enter the setting mode.
2) right button
Select
3) Select left button to enter E4 mode when E4 flashing.
4)
Select right button to switch metric (kilometer) and imperial (mile) unit.
to scroll setting mode from E1 to E4.
to scroll setting mode from E1 to E4.
right button
10 seconds.
to change
8