Summary of Contents for Induction Dynamics SolidDrive SD1
Page 1
INSTALLATION & USE GUIDE for SolidDrive SD1 into wood, laminate, and composite surfaces I N D U C T I O N D Y N A M I C S ® Experience True Audio Perfection Induction Dynamics extensive line of audio products makes...
Page 2
By utilizing these three basic installation steps, When using the SolidDrive SD1 for a wooden surface be sure to order it without the mounting bracket you can install the SolidDrive SD1 on wood, which is for in-wall and in-ceiling installations only.
Page 3
Make the electrical connection between the SolidDrive SD1 and the speaker cable using the Eurostyle connector Figure 3. SolidDrive SD1’s wired in series for high output installations attached to the end of the SolidDrive SD1 audio cable. The polarity of the wiring is clearly indicated (Figure 2).
Page 4
Frequency Response (Hz) 70 Hz to 15 kHz peaks in the frequency response. Use one (1) module Recommended Amplifier Power 10 – 100 Watts with each SolidDrive SD1. Dimensions 2.28" Diameter x 2.08" Height Mounting Plate 3.5'' Diameter Weight 1.2 lb. / .54 kg...