Go! Bridge Functions - Hama 00053186 Operating Instructions Manual

► If the following error message (see screenshot below) appears when you start Go!
► If this is not the case, you have to start the relevant program on the other con-

5.4 Go! Bridge functions

• A direct connection is established as soon as the program has been started on both computers.
• In contrast to the EasySuite software in Windows, only the contents of the remote computer are
displayed on the Mac.
• If you want to transfer data from your remote computer, we recommend that you open the Finder
on the Mac, so that you can then move or copy the data to the desired storage location.
• Of course, you can also drag and drop the data from the remote computer to your desktop, and
then use the Finder to copy/move the data to its final storage location.
26
Note – Connection error
Bridge, check whether the Go! software on the other Mac system (or EasySuite
software on the other Windows system) was started.
nected computer.