Date Time Tab; Rebooting The Camera - Sony SNC-RX530N User Manual

Date time Tab

You can set the date and time on the camera.
1
Click the Date time tab to display the date/time
setting window.
2
Click to select the camera that you want to set the
date and time for.
You can select multiple cameras and set the date
and time simultaneously.
3
Select the date/time format from the Date time
format drop-down list.
4
Select the area where the camera is installed from
the Time zone selecting drop-down list.
5
Set the date and time.
You can set the date and time in two ways.
Manual current date time setting
Set the current date and time on the Manual
current date time setting boxes, and click OK.
The setting boxes are for the year (last two digits),
month, date, hour, minutes and seconds from left to
right.
PC current date time setting
The date and time set on the computer is displayed
in the PC current date time setting box.
Click OK on the right to set the camera's date and
time to coincide with the displayed computer's date
and time.
86
Using the Supplied IP Setup Program
Note
Due to network properties, there may be a slight
difference between the displayed computer's date and
time and those set on the camera.

Rebooting the Camera

Click Reboot on the Network tab to reboot the camera.
It will take about two minutes to start again.