Using The 802.1X Authentication Function - 802.1X Menu; System Configuration Of 802.1X Network; Common Tab - Basic Setting Of 802.1X Authentication Function - Sony SNC-RX530N User Manual

Using the 802.1X
Authentication Function
— 802.1X Menu
When you click
the 802.1X menu appears.
Use this menu to configure the wired or wireless port-
based authentication in compliance with the 802.1X
standard.
The 802.1X menu consists of three tabs: Common,
Client certificate and CA certificate.
Note
To use the 802.1X authentication function, you need
knowledge of the 802.1X authentication (WPA and
WPA2) and digital certificate. To establish an 802.1X
network, you need to configure the authenticator, access
point, authentication server and other elements. For
details on these settings, refer to the manual of the
corresponding equipment.
System configuration of 802.1X
network
The following figure shows a general system
configuration of an 802.1X network.
Supplicant
A supplicant is a device that connects to the
authentication server to join the network. This camera
serves as a supplicant in the 802.1X network. The
in the Administrator menu,
Supplicant (camera)
Authenticator (hub, router or
access point)
Authentication server + CA
supplicant can enter the 802.1X network after the
appropriate authentication by the authentication server.
Authenticator
An authenticator forwards certificate request data or
response data that the supplicant or authentication server
issues to the other party. Normally a hub, router or
access point serves as an authenticator.
Authentication server
An authentication server has a database of connecting
users and verifies if the supplicant is a correct user or
not. It is also called RADIUS server.
CA (Certificate Authority)
A CA issues and manages certificates of the
authentication server (CA certificates) and user
certificates. The CA is essential for certificate-based
user authentication. Normally a CA is located inside an
authentication server.
Note
This camera supports only the EAP-TLS mode in which
the supplicant and the server authenticate each other
using the certificate. This mode requires a CA that issues
the certificate.
Common Tab – Basic setting of
802.1X authentication function
802.1X authentication function
This item is used for enabling/disabling the 802.1X
authentication function for wired ports. The wired
interface status and the wireless interface status can also
be checked here.
Using the 802.1X Authentication Function — 802.1X Menu
49