INTEGRA Metering AMBUS Link Mounting And Operating Instructions page 25

6.4.1. Search all meters
6.4.2. Recording individual meters
6.4.3. Check recorded meters
AMBUS® Link
1. Choose Baud rate
2. Start scan
The meters in the M-Bus network are registered
1. Choose recording
2. Set Baud rate
3. Enter the primary and secondary address
of the meter
4. Confirm
The individual meter is saved
1. All registered meters are listed in a table
2. Check status
Found meters - successfully read
Existing meters - M-Bus alarm
Existing meters - Reading error
Missing meters - not yet read out
All meters are available
or
or
25