Related Manuals for SAVEO SAVEO-SCAN-PKT-RCCD-BT
Summary of Contents for SAVEO SAVEO-SCAN-PKT-RCCD-BT
- Page 1 Scanning with Simplicity SAVEO-SCAN-PKT-RCCD-BT User Guide info@saveoscan.com US PH: +1 847 448 0412 www.saveoscan.com UK PH: +44 208 0998071...
-
Page 2: Table Of Contents
Contents Getting Started Introduction Product Inforrmation Operating Elements LED Indicator Connecting to iOS via Bluetooth Connecting to Android via Bluetooth Unpairing your device User Preferences Operating Modes Reset to Defaults Battery Level Status Power Saving Mode Sound Settings Reading Mode Transmission Speed Enable the onscreen keyboard on iOS devices Enable the onscreen keyboard on Android devices... -
Page 3: Introduction
Getting started Introduction This document provide an easy way to program the decoding options and interface selections by scanning barcodes listed in this guide. Important Notice When printing barcodes for programming, the use of a high-resolution laser printer is strongly recommended for the best scan result. The settings will be updated periodically without prior notice. - Page 4 1 x Mini USB cable 1 x Quick Guide Limited Warranty Saveo Scan provides a one year limited warranty. This warranty does not cover any product which has been subject to improper use, neglect or unauthorized repair or installation. This warranty does not cover consumable parts. (Cables & batteries are consumables.)
-
Page 5: Operating Elements
Getting Started Operating Elements Switch on and Charge your Scanner Please charge your scanner for 3~4 hours before rst use. Remove the protective cover and connect the mini-USB cable to the port on the underside of the scanner and to a mains powered USB charger. -
Page 6: Led Indicator
Getting Started LED Indicator Please refer to the table below for information regarding LED status indicator. LED Indicator Information Orange LED ON Full charged Orange LED (Flashing) Charging / Low battery Red LED ON O ine / Out of Range Green LED ON Good read Orange LED ON... -
Page 7: Connecting To Ios Via Bluetooth
Getting Started Connecting to iOS via Bluetooth Enable Bluetooth on your device Go to your phone’s homescreen and nd “Settings”, then “Bluetooth” and turn Bluetooth on. Scan Bluetooth Pro le barcodes below in order (B1 -> B2) After you scan the Bluetooth pro le barcodes, your scanner will become visible to Bluetooth enabled devices within range. - Page 8 Getting Started Connecting to iOS via Bluetooth Search for devices Your phone will automatically search for devices, Saveo Scan will appear as an external keyboard with a unique identi er number (R-xxxxxx). Select R-xxxxxx to connect Select scanner from “Available Devices”...
-
Page 9: Connecting To Android Via Bluetooth
Getting Started Connecting to Android via Bluetooth Enable Bluetooth on your device Go to your phone’s homescreen and click on the menu button to nd “Settings”, then “Bluetooth” and turn Bluetooth on. Scan Bluetooth Pro le barcodes below in order (B1 -> B2) After you scan the Bluetooth pro le barcodes, your scanner will become visible to Bluetooth enabled devices within range. - Page 10 Getting Started Connecting to Android via Bluetooth Search for devices Click “Search for Devices” at the bottom of the screen and Saveo Scan will appear as an external keyboard with a unique identi er number (R-xxxxxx). Select R-xxxxxx to connect...
-
Page 11: Unpairing Your Device
Getting Started Unpairing your device Please note: The scanner should only be paired to one device at a time. Before you pair your scanner to another device, please rst unpair it from the device in use. Otherwise it will appear on your list of “Available Devices” but may not connect. Using the scanner to unpair To unpair using the scanner, press and hold the left button (as... -
Page 12: Operating Modes
User Preferences Operating Modes There are two operating modes on the scanner, Data Transmission Mode and Data Storage Mode. Scan the appropriate barcodes when switching between these two modes. Please note: Switching between modes will wipe the scanner’s internal memory. Data Transmission Mode (Default) Our Default setting is Data Transmission Mode. - Page 13 User Preferences Operating Modes There are two operating modes on the scanner, Data Transmission Mode and Data Storage Mode. Scan the appropriate barcodes when switching between these two modes. Please note: Switching between modes will wipe the scanner’s internal memory. Data Storage Mode In this mode, data will be saved directly to scanner’s memory.
- Page 14 User Preferences Operating Modes There are two operating modes on the scanner, Data Transmission Mode and Data Storage Mode. Scan the appropriate barcodes when switching between these two modes. Please note: Switching between modes will wipe the scanner’s internal memory. Transmit Memory Data Scan the following barcode to receive data stored in the scanner’s internal memory.
-
Page 15: Reset To Defaults
User Preferences Reset to Defaults To reset con guration to default scan the barcodes below in order (E1 -> E6) Demo W010F01 Demo WFFD980 Demo W100900 Demo WFFD9C3 Demo Demo W010F00 Table of Contents... -
Page 16: Battery Level Status
User Preferences Battery Level Status Scan the barcode below to send battery level information to your device. The format is outlined in the table below. Current Battery Level Scan to send the current battery level to you device. %^4^% 80% - 100% %^3^% 55% - 80% %^2^%... -
Page 17: Power Saving Mode
User Preferences Power Saving Mode Power saving mode is enabled by default and will put the scanner to sleep after one minutes inactivity. To wake the scanner press the trigger. Below are the barcodes to change the power saving mode. Demo Disable Scan to disable power saving mode... -
Page 18: Sound Settings
User Preferences Sound Settings Scan the barcodes to select whether or not the decoder issues a ‘beep’ tone after a good decode. If selecting Disable, beeper signals are issued during parameter menu scanning and to indicate errors. Disable - Scan from F1 - F3 Enable - Scan from G1 - G3 Table of Contents... -
Page 19: Reading Mode
User Preferences Reading Mode The default reading mode is Single Scan. To activate the scanner automatically scan Presentation Mode: Full Auto Mode below. Single Scan - In this mode the scanner attempts to decode when the scan button is pressed. Scan barcodes in sequence (H1 - H3) Presentation Mode: Full Auto Mode - When the scanner detects an object in its eld of view it triggers and attempts to decode. -
Page 20: Transmission Speed
User Preferences Transmission Speed Transmission speed is dependent on your device. In order not to lose data please choose the correct speed. Mid Speed is the default. High Speed Transmission %B%T%H Mid Speed Transmission (default) Demo Low Speed Transmission Table of Contents... -
Page 21: Enable The Onscreen Keyboard On Ios Devices
User Preferences Enable the onscreen keyboard on iOS devices Because Saveo Scan connects to your device as an external keyboard, the onscreen keyboard becomes disabled. This will guide you through the steps required to enable the onscreen keyboard when connected to Saveo Scan on an iOS device. -
Page 22: Enable The Onscreen Keyboard On Android Devices
User Preferences Enable the onscreen keyboard on Android devices Because Saveo Scan connects to your device as an external keyboard, the onscreen keyboard becomes disabled. This will guide you through the steps required to enable the onscreen keyboard when connected to Saveo Scan on an Android device. - Page 23 User Preferences Enable the onscreen keyboard on Android devices If the icon in the noti cation bar does not appear on your device please follow the instructions below. 1. Go to “Settings” and select “Language and input”. 2. Under “Keyboard and Input methods” select “Default”. 3.
-
Page 24: Troubleshooting
Bluetooth search mode. How do I know when my Saveo Pocket Scan is fully charged? The LED light on the Saveo Pocket Scan changes from ashing orange to solid orange when fully charged. How do I connect to the scanner? -
Page 25: General Information
General Information General Information FCC Approval This device had been tested in accordance with the procedures and in compliance with Part 15 Subpart B of FCC Rules. And keeps all requirments according ANSI C63.4 & FCC Part 15 B Regulation and CISPR22 Class B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 26: Further Information
Further Information Contact us at: Email: info@saveoscan.com Phone: US: +1 847 448 0412 UK: +44 208 099 8071 IRE: +353 1 685 4600 or visiit our website: www.saveoscan.com Table of Contents...