SAVEO -PKT2-E800 Quick Setup Manual

Scanning with Simplicity
SAVEO-PKT2-E800
Quick Set
kage
PKT2 E800 c nne 2.4GHz USB Wireless Dongle (Plug & Play)
U e Charging c e 1 x Attachable Lanyard
3M™ VHB™ Device Mount Plate 1 x Retractable Badge Reel Lanyard
Important Safety Information
Don't put scanner, cable or accessories in places of excessively high temperature, such as
exposure to direct sunlight. Don't use scanner in extremely humid conditions or in
conditions of extreme temperature change. Never damage the internal rechargeable
battery. Damaging the casing of the rechargeable battery might cause explosion or fire!
TIP:
Saveo® and Saveo Scan™ are trademarks of Stimare Limited. All other trademarks are property of their respective owners
Quick Setup 2.4GHz Wireless (Default)
1.) Connect Via 2.4Ghz
Wireless 2.4GHz mode
Please Note: When
scanner is within range of USB
2.4Ghz receiver, the devices
will automatically attempt to
connect to each other until a
connection is established.
2.) Perform a Test Scan
To test that your scanner is
connected, open Notepad or a Text
Editor application on your
connected computer, focus the
cursor, and scan the Test Barcode.
V 1.3
Connect the included USB
2.4GHz Wireless Dongle to a
free USB-A port on your
computer. The dongle is a
USB Class Compliant device
and does not require a driver
to operate in HID mode.
the
Plug & Play USB 2.4GHz
Wireless Dongle (included)
Test Barcode
You will see
"Connection
Successful" text
populate in your
text editor upon
scanning the above
test barcode,
confirming your
device is connected.
-1-
Quick Setup Bluetooth HID
1.) Enter Pairing Mode Scan this barcode to
activate Bluetooth mode
and to put the scanner into
"Pairing mode", ready to
pair to your mobile device.
Bluetooth Mode
2.) Enable Bluetooth on
your mobile device
Go to your phone's homescreen
and find "Settings", then
"Bluetooth" and turn Bluetooth
on. Your device will search for
available devices within range.
After approx 20 seconds, Saveo
Scan will appear as an external
keyboard with a unique
identifier serial number (PKT2-
XXXXXXXX).
Please Note: Devices only
need to be paired once.
Select the scanner from
When they are within
"Available Devices" and wait for
Bluetooth range they will
pairing process to complete.
automatically attempt to
connect to each other. If
Once "Connected" is displayed,
you wish to connect to
your device is paired to the
another device it is
scanner. Your scanner is now
recommended you first
ready to use.
unpair this device.
-2-