Specifications - G&L MMC-A2 Hardware Manual

10.3 Specifications

Part Number
Physical size
DC Inputs
Number of Inputs
Configuration
Input voltage
Guaranteed on voltage
Guaranteed off voltage
Turn on/off time
DC Outputs
Number of Outputs
Input voltage
Configuration
Protection of logic circuits
Maximum current
Voltage range
Switch characteristics
Time delay on for resistive loads
Time delay off for resistive loads
Leakage current in off state
Switch voltage, maximum ON
Short circuit protection for each group
(per Group of eight, and entire Group
turns off)
Overload circuit protection trip point
(each Output, and entire Group of eight
turn off)
Scan loss response
Environmental
Operating temperature range
Storage temperature range
Humidity
Vibration (per IEC 68-2-6)
G & L Motion Control Inc.
Table 10-5: Specifications
M.3000.0043
1.28" wide x 9.6" high x 5.3" deep
52.51 mm x 243.84 mm x 134.62 mm
32 Inputs (16 on each connector)
On each of two connectors, the General Inputs are divided into two
groups of eight. Each group can be configured for sourcing or
sinking. Operates with IEC Type 1 inputs (per IEC 1131=2).
Nominal 24 VDC, maximum 30 VDC
15 VDC
5 VDC
1 ms
32 outputs (16 on each connector)
Nominal 24 VDC, 30 VDC maximum
On each of two connectors, there are two groups of eight solid-state
switches.
Optical isolation between the logic and field side, diode transient
suppression protection provided.
250 ma per output
24 VDC nominal, 5 to 30 VDC
Solid-state switches
50 µsec max
50 µsec max
0.5 mA max
1 VDC max
15 A (max) pulses for 130 µsec (nominal) every 100 msec until
short is removed
4 A for 5ms
Outputs turn off
5°C to 55°C (41°F to 131°F)
-40°C to 85°C (-40°F to 185°F)
5 to 95%, non-condensing
10-57 Hz (constant amplitude = .15 mm)
57 - 2000 Hz (acceleration = 2 g)
MMC Hardware Manual
MMC 32In/32Out Option Module
155