Kenmore 253.6000 Series Use & Care Manual page 9

First Steps
To level the cabinet using the front rollers:
1 Remove the toe grille.
2 Use a flat-blade screwdriver or ⅜
inch socket wrench to raise or lower
the front rollers (Figure 2). Do not
raise the cabinet more than 9/16 inch.
9/16"
(14 mm)
Max
Figure 2
3 Use adjustable wrench to adjust
leveling screws. Lower the leveling
screws on each side clockwise until
they contact the floor (Figure 3). Do not
raise the cabinet more than 9/16 inch.
14 mm
Max
Figure 3
Raise
or
Relevez
NOTE
Raise the front of the refrigerator enough
so the doors close freely when opened
halfway. The refrigerator should slope ¼
inch to ½ inch from front-to-back. Then
level the refrigerator from side-to-side.
9