Cx10 Protokoll - Deviation Devo 6 User Manual

Deviation User Manual for Devo 6/8/12, Kiadás 5.1-dev

9.37 *CX10 protokoll

The CX10 format supports the Cheerson CX10 quadcopter. NOTE: This protocol requires the addition
of an 'NRF24L01' hardware module to function. See the following document for more information:
http://www.deviationtx.com/wiki/#hardware_modifications
The CX10 protocol supports 9 channels and only supports auto-binding. The protocol stays in bind mode
until successful. The first four channels are Aileron, Elevator, Throttle and Rudder.
Channel 5 is Rate except on the CX-10A, where it is headless mode.
Channel 6 is flip mode.
The DM007 format also uses channel 7 for the still camera, channel 8 for the video camera and channel 9
for headless mode.
The protocol has a Format option for the Blue-A, Green, DM007, Q282, JC3015-1, JC3015-2, MK33041
and Q242 quadcopters.
9.38 *CG023 protokoll
The CG023 protocol supports the Eachine CG023 and 3D X4 quadcopters. It has not been tested on other
models. NOTE: This protocol requires the addition of an 'NRF24L01' hardware module to function.
See the following document for more information:
http://www.deviationtx.com/wiki/#hardware_modifications
The CG023 protocol supports 9 channels and only supports auto-binding.
The first four channels are Aileron, Elevator, Throttle and Rudder.
Channel 5 controls the LEDs.
Channel 6 controls Flip mode.
Channel 7 controls the still camera
Channel 8 controls the video camera.
Channel 9 controls headless mode.
The protocol has a Format option for the YD829 quadcopter.
9.39 *H8_3D protokoll
The H8_3D protocol supports the Eachine H8 3D, JJRC H20 and H11D quadcopters. It has not been tested
on other models. NOTE: This protocol requires the addition of an 'NRF24L01' hardware module to
function. See the following document for more information:
http://www.deviationtx.com/wiki/#hardware_modifications
The H8_3D protocol supports 11 channels and only supports auto-binding.
Tartalomjegyzék 85