Joysway Protokoll - Deviation Devo 6 User Manual

Deviation User Manual for Devo 6/8/12, Kiadás 5.1-dev
• Channel 10 Enables return to home
• Channel 11 Enables GPS hold
• Channel 12 Sets Sport 1, Sport 2 or Acro mode (H123D)
• Channel 13 Enables 'flip' mode (H122D)
Options configurable on the Hubsan page:
• vTX MHz: Defines the frequency used by the Hubsan H107D video transmitter (Requires a 5.8GHz
receiver capable of receiving and displaying video).
• Telemetry: Enable receiving of model battery voltage.
• Freq-fine: Frequency offset adjustment. Range -300 to 300. Adjusts for variances betweeen A7105
modules. Default 0.

9.12 *Joysway protokoll

The Joysway protocol supports the Joysway Caribbean model yacht, and the J4C12R receiver used in the
Joysway Orion, Explorer, Dragon Force 65 model yachts and Force2 60 model catamaran. No other models
or receivers have been tested with this protocol, including air versions of the J4C12R. NOTE: This protocol
requires the addition of an 'A7105' hardware module to function. See the following document for
more information:
http://www.deviationtx.com/wiki/#hardware_modifications
The Joysway protocol supports up to four channels, does not support auto-binding, but will bind whenever a
receiver requests binding. If Fixed ID is set to None, a transmitter-specific ID is used instead. It is necessary
to bind each model before the first use.
The first channel normally controls the sheets and the second channel the rudder, but this may vary from
model to model.
9.13 Protocol: *Bugs3
The Bugs3 protocol is used to control MJX Bugs3 and Bugs8 aircraft. NOTE: This protocol requires the
addition of an 'A7105' hardware module to function. See the following document for more informati-
on: http://www.deviationtx.com/wiki/#hardware_modifications
To bind first choose the bugs3 protocol and click Bind. Then apply power to the aircraft. The bind dialog
will disappear if bind is successful. The aircraft's radio id is stored in the model Fixed ID field. Do not
change this value.
Channels used for controlling functions. Set channel value greater than zero to activate.
• Arming is controlled by Channel 5
• Lights are controlled by Channel 6
• Flip is controlled by Channel 7
74 Tartalomjegyzék