Protections (Menu G2 G2.6); Keypad Control (Control Keypad: Menu M3); System Menu (Control Keypad: Menu M6); Expander Boards (Control Keypad: Menu M7) - Vacon OPT-A2 User Manual

Brake Chopper Application – Parameter lists
3.7 Protections (Menu G2
Code Parameter
P2.6.1 PT100 Numbers
P2.6.2 PT100 Alarm Lim
P2.6.3 PT100 Fault Lim
P2.6.4 Thermistor
P2.6.5 External Fault
Table 3-9. Protections G2.6
3.8

Keypad control (Control keypad: Menu M3)

Code Parameter
P3.1 Control place
Table 3-10. Keypad control parameters M3
3.9

System menu (Control keypad: Menu M6)

For parameters and functions related to the general use of the frequency converter, such as
application and language selection, customised parameter sets or information about the hardware
and software, see Chapter 7.3.6 in the Vacon NX User's Manual.

3.10 Expander boards (Control keypad: Menu M7)

The M7 menu shows the expander and option boards attached to the control board and board-
related information. For more information, see Chapter 7.3.7 in the Vacon NX User's Manual.
24-hour support +358 (0)40 8371 150 • Email: vacon@vacon.com
G2.6)
Default Min
0 0
110 -30
PT100
Alarm
120
limit
(P2.6.2)
1 0
2 0
Default Min Max
0 0 1
Max Unit ID
Number of PT100
inputs in use at OPT-
B8 option board.
3 739
Visible only when the
option board has
been installed
Select the
temperature for PT100
200 °C 1347 sensor above which
PT100 alarm is
generated in the drive.
Select the
temperature for PT100
300 °C 1348 sensor above which
PT100 fault is
generated in the drive
Response to
thermistor
overtemperature.
2 1351
0=No Action,
1=Warning,
2=Fault
Response to External
fault.
2 701
0=No action,
1=Warning,
2=Fault
Unit ID Description
0=I/O terminal (default)
125
1=Fieldbus
vacon • 11
Note