Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MAHLE NitroPRO NTF-515B
Summary of Contents for MAHLE NitroPRO NTF-515B
- Page 1 MAHLE NTF-515B Operation Manual Nitrogen Tire Filling Unit...
-
Page 2: Table Of Contents
Battery and battery charger 2.5.6 Dually hose connection 2.5.7 Single tire fill accessory connection port 11 Functional description 2.6.1 Unit function 2.6.2 Nitrogen generation Commissioning 2.7.1 Removing transportation packaging 2.7.2 Verify air source 2.7.3 NTF-515B 2.7.4 Generating nitrogen © MAHLE... - Page 3 | NTF-515B | 3 NTF-515B | 3 © MAHLE...
-
Page 4: Information
Contact Warning Consequences of hazard in the event of failure MAHLE if you detect a problem that you cannot solve with this symbol to observe action and information given. manual. -
Page 5: Warranty
North America) Purchaser in this regard for the life of the covered product. MAHLE (MSS) warrants to the original Purchaser of the NitroPRO The Purchaser should review the legal Warranty Disclaimer to be free from defects in materials and workmanship as follows: (Page 2) for more details of coverage and limitations. - Page 6 (d) Any damage to product during original shipment or subse- of MSS's principle place of business. quent shipments to MSS's facility for service. (e) Portions of products which are subject to warranties, if any, given by their manufacturers. MSS does not adopt these warranties. © MAHLE...
-
Page 7: Safety Regulations
Always carefully study and follow all the safety regulationsbefore as prescribed. using the MAHLE product. Correct use of the NTF-515B is im- Ensure air supply is rated for 100-150PSI and minimum portant for your personal saftey and for trouble-free functionality. -
Page 8: Product Description
Description NTF-515B unit Battery charger Battery (installed in unit) Nitrogen purity analyzer Connection port for digital tire fill gun (fill gun sold as accessory) Connection port for dually tire hose connection (additional hoses sold as accessory Operation manual © MAHLE... -
Page 9: Description Of Unit
Dually tire hose accessory quick connect Air inlet connection Water filter with automatic drain Single tire digital fill gun accessory quick connect Automatic drain (oil and water) Carbon filter Purity selector valve (95% or 98%) Oil filter with automatic drain Nitrogen membrane © MAHLE... -
Page 10: User Interface
To remove the air chuck from the valve stem, press down on 2.4.3 Value adjustment the silver clip and pull off of valve stem. To adjust the target inflation value, simply press the but- tons. The value in the upper screen will adjust accordingly. Fig. 6: Air chuck © MAHLE... -
Page 11: Nitrogen Purity Tester
Technicians can connect their own coiled hose and digital tire fill gun to the unit if they own one. In the instance that one is not available, MSS has P/N 355 80258 00 available for purchase. © MAHLE... -
Page 12: Functional Description
Oxygen and water vapor have a high diffusion rate and pewrmeate rapidly through the membrane wall. — Nitrogen has a low diffusion rate and permeates slowly through the membrane wall. At the exit of the membrane (Fig.10, Pos. 4), pressurized nitrogen is released. © MAHLE... -
Page 13: Commissioning
Air flow is 13.3CFM minimum — Air temperature is below 110F If your application requires an inlet pressure of 100-119PSI, the pressure value can be adjusted to accomodate the lower system pressure. Contact MSS Technical Support at 1-800- 468-2321 for details. © MAHLE... -
Page 14: Nitrogen Service
4. Press START button to save the Over Pressure Setting (OPS). procedure resulting in possible performance issues and costly 5. Press N button. repairs not covered by MAHLE's warranty. 6. Press buttons to select desired number of Nitrogen Purge Cycles (N2P). -
Page 15: Service Phases
) Valve cap kits are available for purchase through a number on one screen if less than 1000 cycles. If more than MAHLE. See Spare and Wearing parts section of manual or call a 1000 cycles, one number will be displayed (the thousands... -
Page 16: Maintenance
(Fig. 12, Pos. 4). Do not bend the needle (Fig. 12, Pos. 3). 6. Clean the parts with soap and water. Make sure the needle bore is open and clean. 7. Assemble the parts in the reverse order. Make sure the parts are dry before reassembly. © MAHLE... -
Page 17: Filter Element Maintenance
6. Remove the old filter element (Fig. 13, Pos. 3). 7. Clean the sieve (Fig. 13, Pos. 2), filter bowl, and the filter housing, if necessary. 8. Install the new filter element. 9. Assemble the parts in the reverse order. © MAHLE... -
Page 18: Spare And Wearing Parts
Replacement purity tester 355 80022 00 Operation manual 035 82548 00 Dually hose adapter connection kit (accessory) 355 80123 00 Digital tire gauge and coiled hose (accessory) 355 80258 00 Sealant detection kit (accessory item) 360 81733 00 © MAHLE... -
Page 19: Notes
Notes | NTF-515B | 19 NTF-515B | 19 | 19 Notes © MAHLE... - Page 20 MAHLE Aftermarket Inc. 10 Innovation Drive York, PA 17402 717-840-0678 www.servicesolutions.mahle.com...