MAHLE ArcticPro 200yf Quick Manual

en Quick manual
D
Before connecting service hoses proceed as follows:
1. Verify that the oil system type matches between the actual vehicle A/C system and current configuration of the ACS unit
(PAG or POE). If required change oil type in "Settings >> A/C Service Parameters" (see operating instructions chapter 4.4).
2. Perform refrigerant identification (see operating instructions chapter 6.3).
D
Use of a refrigerant identifier reduces the risk of contamination of ArcticPro 200yf. If the service hoses are connected to the vehicle
before refrigerant identification there is the risk for contamination of the refrigerant system of ArcticPro 200yf. The contamination in
the ArcticPro 200yf can only be removed by a service provider at additional cost.
1.

Menu overview

Menu level 1 Menu level 2
Vehicle A/C Service Automatic A/C Service
Manual A/C Service
A/C system flushing
Refrigerant Identification
Maintenance Internal bottle fill
Hose Drain
System leak test
Service report
Maintenance
Settings General settings
A/C Service Parameters
My database
Reset factory settings
ArcticPro 200yf
Menu level 3
Direct parameter input
From vehicle database
From last 10 vehicles
Recovery
Vacuum creation
Recharge oil
Recharge UV dye
Recharge R1234yf
Short flushing
Extended Flushing
Last 3 system service reports
Self test report
R1234yf report
Error report
Statistics
Self test
Calibration
Firmware update
Languages
Date and Time
Workshop Data
System settings
Maximum service data records
PAG oil
POE oil
Menu level 4
Operating hour meter
Filter drier life
Vacuum pump oil life
Scale calibration
Tare Reset
R1234yf calibration check
Printer
Workshop details on printout
Buzzer
Operator list