Display Burst Group - Sony DSC-TX5 Cyber-shot&reg Handbook

Display Burst Group

You can select to display burst images in groups or display all images during playback.
1 Press the
(Playback) button to switch to
playback mode.
2 t (View Mode) t
3 t (Display Burst Group) t desired
mode
(Display Main
Image Only)
(Display All)
z Displaying grouped burst images side by side
Only main images are displayed if [Display Main Image Only] has been set. You can
display a line-up of images by following the procedure below.
Main image
1Display the main image in playback mode, then touch it.
The images are displayed in the index.
/ to display the desired image.
2Touch
• You can also display the image by touching the thumbnail image at the bottom of the LCD
screen.
3The display switches between single image display and thumbnail image display each
time you touch the screen.
4To cancel the display, touch
(Date View)
Groups burst images, then plays back the main images only.
• When Face Detection is performed in burst mode, the camera
determines and displays the optimum image as the main image.
When Face Detection is not performed, the first image in the burst
group is displayed as the main image.
Plays back all burst images one at a time.
Thumbnail image display
The image being displayed
above
.
Single image display
79 GB