Setting The Still Image Size - Sony DSC-U10 Operating Instructions (primary manual) Operating Instructions Manual

3
Access lamp
, Close the battery/"Memory Stick" cover.
To remove a "Memory Stick"
Open the battery/"Memory Stick" cover, then push the
"Memory Stick" to pop it out.
• When the access lamp is lit up, it means that image
data is being read or written. Never remove the
"Memory Stick" or turn off the power at this time,
as the data may be damaged.

Setting the still image size

STILL
MENU
1
, Set the mode switch to STILL, and turn
on the power, then press MENU.
The menu appears on the LCD screen.
RETURN
SIZE BURST •
1280 1280 1280
FOCUS AUTO
SELFTIMER OFF
P.EFFECT OFF
23