Setting The Date And Time - Sony DSC-U10 Operating Instructions (primary manual) Operating Instructions Manual

Setting the date and time

POWER
1
, Slide the lens cover in the direction of
the arrow or press the POWER button to
turn on the power.
The POWER lamp (green) lights up and the DATE
NOTATION screen appears on the LCD screen.
• This operation is available no matter what position the mode
switch is in.
• To change the date and time, press MENU and select
[DATE&TIME SET] in [CLOCK SET] under [
(page 89), then perform the procedure from step 3.
20
DATE NOTATION
2002 1
12:00:00
POWER
button
Y / M / D
M / D / Y
D / M / Y
]
1
AM
2
, Select the desired date display format
with v/V on the control button, then
press EXEC.
Select from [Y/M/D] (year/month/day), [M/D/Y]
(month/day/year) or [D/M/Y] (day/month/year). Then
DATE&TIME SET screen appears on the LCD screen.
• If the rechargeable button battery, which provides the power
for saving the time data, is ever fully discharged (page 91),
the DATE NOTATION screen will appear again. When this
happens, reset the date and time, by starting from step 2.
DATE&TIME SET
Y / M / D
2002 1 1 12:00
AM
EXEC