8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Status page displays.
6. Select VLAN > 802.1Q > Advanced > PVID.
You can select Port PVID only if you already enabled the advanced 802.1Q VLAN option
(see Create 802.1Q-based VLANs in an advanced configuration on page 59).
7. Select one or more ports.
8. Enter the PVID.
You can enter a PVID only for a VLAN that already exists.
9. Click the APPLY button.
Your settings are saved.
Use VLANS for Traffic Segmentation
67
User Manual