Use The Prosafe Plus Utility To Assign Ports To Multiple; Port-Based Vlans - NETGEAR PROSAFE XS716E User Manual

8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch

Use the ProSAFE Plus Utility to assign ports to multiple

port-based VLANs

To assign ports to multiple port-based VLANs:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Status page displays.
6. Select VLAN > Port Based > Advanced.
The Advanced Port-based VLAN page displays.
7. If this is the first time that you are accessing the Advanced Port-based VLAN Configuration
page or if you are changing the VLAN assignment method, select the Enable radio button
and continue with Step 8.
Otherwise, go to Step 9.
A pop-up window opens, informing you that the current VLAN settings will be lost.
8. Click the Yes button.
The pop-up window closes and the VLAN Configuration and VLAN Membership sections
display.
Use VLANS for Traffic Segmentation 55 User Manual