Supporting Vehicle And Adjustment - VERDEGRO TTMA Operation And Maintenance

7 Supporting vehicle and adjustment

It is important that the TTMA is mounted correctly behind the supporting vehicle. Mounting the
TTMA behind the vehicle can be done with a DIN connector and Rockinger. Make sure the
connection with the truck is done or checked by Verdegro or a distributor, and that a certificate is
given. Also make sure the bumper of the truck is correctly installed. The TTMA is tested with a 40mm
DIN coupling, so a 50mm will also be correct.
It is allowed that a country overrules the specifications of the supporting vehicle, for example (valid
for the Verdegro TTMA):

Sweden: Lower limit weight of the truck 9.000 kgs, upper limit by manufacturer

Belgium: Lower limit weight of the truck 8.000 kgs, upper limit 9.440 kgs
Make sure the DIN coupling is correctly installed. Only use couplings certified
4
If you have a truck which is heavier, contact Verdegro or your distributor.
Manual TTMA-100K
or delivered byVerdegro
Make sure the ROCKINGER and bumper are correctly installed!!!
4
Page 11 of 19