Basic Operation - Redline RL-101 Installation And Operation Manual

There are three main modes for the RL101 Head Unit. In addition, there is an OFF
mode and a Startup mode. When the unit is powered, there is a 30 second
(Startup) countdown during which some system values are displayed before going into the
Normal Operating mode.
To get to the second mode this is addressing. Press TEST to get to the third Mode, press TEST again
while in the 2nd Mode. Pressing TEST while in the 3rd Mode will get back into the 2nd mode or
addressing. Pressing MENU multiple times will get back to Normal Operating mode.
If left in any mode (except OFF), the unit will return to Normal Mode after three minutes.
When the Head unit changes modes, it will send a message to the Monitor.
Menu Reed
Test Reed
Connector for RL-SSH
H2S Sensor Housing

Basic Operation

Radio antenna
XBee Pro 2.4G Radio
Up Reed
Down Reed
Buttons for changing
modes
9VDC in
3