Checking The Last Image Shot - Quick Review; Using The Zoom Feature - Sony Cyber-Shot DSC-P73 Operating Instructions Manual

Checking the last image
–
shot Quick Review
Review
101-0008 2005 1 1
RETURN
, Press b (7) on the control
button.
To return to shooting mode, press the
shutter button lightly or press b (7) on the
control button again.
To delete the image displayed on the
LCD screen
1 Press (Delete).
2 Select [Delete] with v on the control
button, then press z.
The image is deleted.
• The image may appear rough right after
playback starts due to the image processing.

Using the zoom feature

W (wide-angle) T (telephoto)
VGA
8/8
101
10:30
PM
, Press the zoom buttons to
choose the desired zoom
position, and shoot your
image.
The minimum focal distance to the
subject
DSC-P93A: Approx 50 cm (19
(W)/60 cm (23
surface
DSC-P73: Approx 50 cm (19
(W/T) from the lens surface
• The lens moves when the zoom feature is being
used. Be very careful not to touch the lens.
• You cannot change the zoom scaling while
shooting movies (page 79).
101 101
VGA VGA
98 98
x1.1 S x5.0
3
/ inches)
4
5
/ inches) (T) from the lens
8
3
/ inches)
4
Zoom
Your camera is equipped with zoom
functions that enlarge the image using
optical zoom and two types of digital
processing. Digital zoom can be selected
from smart zoom or precision digital zoom.
When digital zoom is set, the zoom method
switches from optical zoom to digital zoom
when the zoom scale exceeds 3×.
To use only the optical zoom, set [Digital
Zoom] to [Off] in the SET UP settings
(page 116). In this case, the digital zoom
area does not appear in the zoom scale
display bar on the LCD screen, and the
maximum zoom is 3×.
The enlargement method and the zoom
scale differ according to the image size and
the zoom type, so select the zoom to match
the shooting purpose.
When you press the zoom button, the zoom
scaling indicator appears on the LCD screen
as follows.
27