Sony Cyber-Shot DSC-P73 Operating Instructions Manual page 113

Item Setting
ISO (ISO) 400 / 200 / 100 / xAuto
(P.Quality) xFine / Standard
Mode (REC Mode) Multi Burst
Burst
xNormal
(Interval) 1/7.5 / 1/15 / x1/30
(Flash Level) + / xNormal / –
PFX (P.Effect) B&W / Sepia / xOff
(Saturation) + / xNormal / –
(Contrast) + / xNormal / –
+ / xNormal / –
(Sharpness)
Description
Selects the ISO sensitivity. When shooting under dark conditions or shooting a fast-
moving subject, use a high-number setting. When recording high-quality images, use
a low-number setting.
• The higher the number you select, the more the noise increases.
Records images with fine image quality mode. / Records images in the standard
image quality mode (page 47).
– Records a continuous burst of 16 frames within a single still image (page 61).
– Records images in succession (page 60).
– Records an image using the normal recording mode.
Selects the Multi Burst between-frame shutter interval (Only when [Mode] (REC
Mode) is set to [Multi Burst]) (page 61).
Selects the amount of flash light (page 59).
Sets the special effects for the image (page 62).
Adjusts the saturation of the image. The
setting is Normal.)
Adjusts the contrast of the image. The
is Normal.)
Adjusts the sharpness of the image. The
setting is Normal.)
indicator appears (except when the
indicator appears (except when the setting
indicator appears (except when the
113