Table of Contents
Advertisement
1
4.3.3
Small Signal Board (SSB) + PSU combination panel
Refer to
Figure 4-11
for details.
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the SSB + PSU combination panel.
1. Release the clips from the LVDS connector that connect
with the SSB + PSU combination panel [1].
Caution: be careful, as these are very fragile connectors!
2. Unplug all other connectors [2] , [3].
3. Remove all the fixation screws from the SSB + PSU
combination panel [4].
4. The SSB + PSU combination panel can now be shifted
from side connector cover, then lifted and taken out of the
I/O bracket. Refer to
1
3
2
Figure 4-10 Speakers removal
Figure 4-11
for details.
Mechanical Instructions
4
4
Figure 4-11 SSB + PSU combination panel removal
4.3.4
Stand bracket
1. Remove all fixation screws of the bracket.
2. Lift the bracket from the set.
4.3.5
Control Board IR/LED Panel
1. Remove the stand bracket, as described earlier.
back to
div. table
TPN10.1E LA
4.
1
1
3
19530_110_130723.eps
3
2
1
19530_112_130723.eps
EN 21
130723
4
4
130723
2013-Oct-18
Hide quick links:
Advertisement
Table of Contents
