Shooting With Shutter Speed Priority Mode - Sony Cyber-shot DSC-F828 Operating Instructions Manual

Digital still camera
Hide thumbs Also See for Cyber-shot DSC-F828:
Table of Contents

Advertisement

Shooting with shutter
speed priority mode
Mode dial: S
You can adjust the shutter speed manually.
If you shoot a moving subject at a higher
shutter speed, it appears as if frozen on the
image. At a lower shutter speed, the subject
appears as if it flowing.
Aperture value is automatically adjusted to
attain correct exposure according to the
brightness of the subject.
High shutter speed Slow shutter speed
Command dial
Shutter button
Mode dial
a Set the mode dial to S.
b Select a shutter speed with the
command dial.
80
FINE
min
101
8M
S
98
200
250
S
320
MAF
F2.0
0
EV
The shutter speed can be selected from
1/2000 to 30 seconds.
If you select 1/25 second or slower
shutter speeds, the NR slow shutter
function is automatically activated. In
such cases, "NR" is indicated at the
left of shutter speed indicator.
c Shoot the image.
• Shutter speeds of one second or longer are
indicated with ["] after the value, such as 1".
• If the proper exposure is not obtained after
making the settings, the setting value indicators
on the screen flashes when the shutter button is
pressed halfway down. You can shoot in this
condition, but we recommend that you adjust
the flashing values again.
• The flash is set to
(Forced flash) or
flash).
• When the shutter speed is high, the amount of
flash light may be insufficient even if you
strobes the flash.
• You can adjust the exposure value (page 59).
NR slow shutter
The NR slow shutter mode removes noise
from recorded images, providing clear
images. When using shutter speeds of 1/25
second or slower, the camera automatically
works the NR slow shutter mode and "NR"
is indicated next to the shutter speed
indicator.
F2.8
2''
NR
r
Capturing
r
Processing
• To eliminate the effects of vibration, use of
a tripod is recommended.
• When a slow shutter speed is set, the
processing may take some time. This is
(No
because the camera works to remove noise
during the time set by the shutter speed
setting.
Press the shutter
button fully down.
Then the screen
turns black.
Finally, when
"Processing"
disappears, the
image has been
recorded.
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc f828 - 8mp digital camera

Table of Contents