Selecting Brightness Of The Flash (Flash Level); Recording Images In Macro - Sony DSC-F55 PictureGear v4.1 Lite Operating Instructions Manual

Selecting brightness
of the flash (FLASH
LEVEL)
You can select brightness of the flash.
Control button
1
Set the MODE selector to STILL.
2
Press v of the control button.
The menu bar appears on the LCD
screen.
3
Select "CAMERA" with the
control button, then press it.
The CAMERA menu appears on
the screen.
WHITE BALANCE
FLASH LEVEL
EXPOSURE
SELF
EFFECT FILE
TIMER
SELECT OK
4
Select "FLASH LEVEL" with the
control button, then press it.
WHITE BALANCE
FLASH LEVEL
EXPOSURE
SELF
EFFECT FILE
TIMER
SELECT OK
MODE
selector
CAMERA SETUP
HIGH
NORMAL
LOW
CAMERA SETUP
5
Select the brightness of flash with
the control button.
WHITE BALANCE
FLASH LEVEL
EXPOSURE
SELF
EFFECT FILE
TIMER
SELECT OK
6
Press V of the control button
repeatedly.
The menu bar disappears from the
screen.
z Hints for setting the flash
adjustment
When the subject or background is dark,
the flash adjustment may become too
high. In this case, set FLASH LEVEL to
LOW ( –). On the other hand, when the
subject or background is bright, the flash
adjustment may become too low. In this
case, set FLASH LEVEL to HIGH ( +). To
set the flash level properly, we
recommend you to do a trial recording.
Recording images in
macro
Press the (macro) button. The macro
indicator ( ) appears on the LCD
screen. You can shoot a subject that is
about 4 inches (10 cm) away from the
lens surface in macro mode.
If you press the (macro) button
again, macro mode is released and you
can record images in normal mode.
HIGH
CAMERA SETUP
25-GB