Applications; Gaming Application - Jofemar T15 User Manual

MAIN VALIDATOR
CONNECTOR
9 1
10 2
+5V
+5V
(JOFEMAR APPLICATION)

4. APPLICATIONS.

The selector is factory configured to work with one of the following applications:
Game Validator: Mainly used in machines.
Jofemar Validator: Mainly used in Jofemar machines and coin changers.
cctalk Validator: For machines with this particular interface
There is a specific program for each of these applications which needs to be loaded in
the selector's flash memory.

4.1. Gaming application.

For this application the selector has to be connected to the machine with the 10-way
connector.
Signals are assigned to pins as follows:
1 2
+12 V 0 V
Pins 1 and 2: Power supply +12 Vdc
Pins 3, 4, 5. 7, 8, 9 and 10: Signals of coins M1 to M7.
They are open collector NPN transistors with the emitter connected to 0 V. The
selector writes a coded signal for the recognised coin saturating the transistors for a
maximum period of 10 ms and a minimum period of 1 ms.
MNP64ENV00
1 +12VDC
2 GND
4 M1
5 M2
7 M3
3 M4
8 M5 (REC/ PRES)
10 M6 (NC)
9
M7 (NC)
6 INNIBITION
3 4 5
M4 M1 M2
Date: 03-2007 Rev. 03
CCTALK
CONNECTOR
1 4
+5V
6 7
INH. M3 M5
1
+12VDC
3 GND
4 DATA
8 9 10
M7 M6
Page 8 of 16