Environmental Advice; Troubleshooting - Jofemar T15 User Manual

6.

Environmental advice.

Do not throw electronic circuits in the trash. Many of the materials used
to make them are recyclable. Consult your local authorities about
electronic component recycling.
To dispose of packaging materials, consult your local authorities about
recycling.
7.

Troubleshooting.

Problem
Coins not properly
accepted.
Coins not accepted.
Coins jam in selector coin
entry area.
MNP64ENV00
Possible causes
Dirt in testing area.
Coin stuck in validation
exit.
Selector has no power
supply.
Unreliable electrical
connection between
selector and machine.
Bad location or anchoring
of selector in support.
Coins or other foreign
matter stuck inside
selector.
Date: 03-2007 Rev. 03
Steps to follow
Clean testing area with a
cloth moistened with water.
Remove the selector from
the support and check
whether the accepted coin
exit is free.
Check whether the selector
has a proper power supply.
Loosen selector
connection and reconnect
it, ensuring that it is the
proper connection.
Check whether the selector
has been properly installed
on its support and the
funnel and case are
properly placed.
Open the selector door and
check that there are no
coins or other matter in the
coin circulation area.
Page 14 of 16