Page 1
& ITN-32P3 NB 4 Thank you for purchasing the Imago IP Camera. For its proper installation, follow this short instruction and user manual to ensure the trouble-free operation and long life of the camera. If you have any questions during the installation or use of the product, contact the technical support of your supplier.
Page 2
Notice The camera should be stored in a dry environment. Do not turn on the camera and do not work with voltage in a humid environment. Do not install cameras in a high humidity environment. Do not install your camera on unstable or vibrating surfaces or brackets. ...
Page 3
Use the supplied screws to attach the camera body, align it if necessary and tighten the nut on the bracket to secure the position - see Fig. 2 No need to focus the camera as it has been focused by the manufacturer ...
Page 4
The camera can be found on the network using the application of the recording software iVMS-4200 on the attached CD or can be downloaded at www.imago-video.com Run the installation file from the CD (as a standard iVMS-4200.exe), accept the license agreement and follow the instructions on the screen ...
Fig. 5: Software iVMS-4200 – searching for camera in the network Restoring the factory settings Disconnect the camera from the power supply Press and hold the "Reset" button which is located on the back of the camera body ...