Restoring The Factory Settings - IMAGO ITN-12P3 NB 4 Quick Installation Manual

Fig. 5: Software iVMS-4200 – searching for camera in the network

Disconnect the camera from the power supply

Press and hold the "Reset" button which is located on the back of the camera body

Keep the button pressed and connect the camera to power supply

Hold the reset button for at least 10 seconds and then release it

After a while the camera will start with default parameters

Restoring the factory settings

w w w . c a m e r a c a m e r a . g r
info@cameracamera.gr | +30 210 6613866
www.facebook.com/cameracamera.gr