Advertisement
Use the supplied screws to attach the camera body, align it if necessary and tighten the nut on the
bracket to secure the position - see Fig. 2
No need to focus the camera as it has been focused by the manufacturer
Check the direction of the camera in a Web browser (see the next chapter) or adjust its direction
Connect the camera to a data switch using the UTP or STP cable with the RJ-45 connector - the
camera is powered via PoE - Power over Ethernet according to IEEE 802.3af standard; for power
only use elements that meet this international standard
If you do not have Power over Ethernet available, you can use the power adapter with the 12VDC/1A
output (not included)
When routing the cable outdoors or in moist environments, use cap of the RJ-45 connector that
ensures the water resistance of the connection - see Fig. 3 and 4
Fig. 2: Camera IDN31P1 NB 2.8 (nut to fix its
position)
Fig. 3 Dismantled cap of the RJ-45 connector
w w w . c a m e r a c a m e r a . g r
info@cameracamera.gr | +30 210 6613866
www.facebook.com/cameracamera.gr
Advertisement
