Software Operation
Header/Footer Menu
22(E)
Going to another menu
Click the respective menu button.
If an error occurs in the system
The "OK" indication in the System Condition box in the top-right section
of the screen changes to "NG". Click the box to obtain help. A window
will appear to explain the cause of the problem.
Use this menu to set the film header, footer, and density patch. Prior to
recording, header, footer, and density patch must be defined.
The header, footer, and density patch are used to check the difference
between the black and white levels and to make sure that data can be read
correctly.
The recording position of each item is shown in the figure below:
Header
Head density patch
SDDS
track
Analog
track
POP signal
Film head
Foot density patch
Audio signals
POP signal
Footer
Film tail