Accu-Chek Aviva - Glooko Transmitter Quick Manual

Glucose meters - with infrared connection
IR
Set the meter in upload mode by following the instructions below.
Place the glucose meter's top end directed towards the IR window
on Glooko Transmitter.
Please make sure to keep the device completely still during the upload.
i
Do not remove the device until the screen displays: Transfer complete!
Roche

Accu-Chek Aviva

Accu-Chek Aviva Nano
Accu-Chek Nano
Accu-Chek Performa
Accu-Chek Compact
Accu-Chek Compact Plus
Accu-Chek Compact Plus GT
Accu-Chek Aviva Combo
Accu-Chek Aviva Expert
Accu-Chek Mobile (IR)
IR window on Glooko Transmitter
Activate IR transmission by pressing and holding the two
arrow buttons until two arrows appear in the display.
Activate IR transmission by pressing and holding
the meter's two topmost buttons until two arrows
appear in the display.
Activate IR transmission by pressing and holding
the buttons S and M below the display until two arrows
appear in the display.
In the main menu, go to My data and
select Data transfer.
1. Press and hold the two arrow buttons.
2. In the data transfer menu, select the first
alternative (for analysis).
NOTE: If the meter's serial number begins
with U1, please refer to the instructions for
Accu-Chek Mobile (USB) on page 16.
18