Advertisement
Quick Links
Glooko MeterSync Blue for iOS™ and Android™
INSTRUCTION GUIDE
Need more detailed instruction?
Visit: support.glooko.com
Warning:
Unplug the Glooko MeterSync Blue from your meter after each use.
Leaving it plugged in can drain your meter's battery.
It is important that you do not sync your meter with Glooko app(s)
while you are still testing for your blood glucose level.
Advertisement
Related Manuals for Glooko MeterSync Blue
Summary of Contents for Glooko MeterSync Blue
- Page 1 Unplug the Glooko MeterSync Blue from your meter after each use. Leaving it plugged in can drain your meter’s battery. It is important that you do not sync your meter with Glooko app(s) while you are still testing for your blood glucose level.
- Page 2 Compatible glucose meters with Glooko MeterSync Blue Abbott Ascencia (Bayer) Roche Accu-Chek Aviva Expert ......4 FreeStyle Freedom Lite ......5 Breeze 2 ............4 Accu-Chek Aviva Nano ......4 FreeStyle Lite ..........5 Contour ............4 Accu-Chek Aviva Plus Black ....4 Contour Next EZ ........
- Page 3 2) Pair your Glooko MeterSync Blue with your in the Glooko app. iOS or Android device (one-time only) Go to Profile > Devices > MeterSync Blue > Setup New If Bluetooth is not ON on your iOS or Android device, you Device to initiate the pairing tutorial.
- Page 4 3) Sync your glucose meter Ascensia® (Bayer®) meters Please visit support.glooko.com for more detailed instructions You will need: Glooko MeterSync Blue and the meter connector. regarding your meter. 1. Depending on if you’re a new or returning user, press Sync > Select your Device from the list, or add a New Accu-Chek®...
- Page 5 3. Plug one end of the meter connector into the audio port of the Glooko MeterSync Blue. You will need: Glooko MeterSync Blue, meter connector, and 2.5 mm adapter. 4. Press the S button to put your meter into data transfer mode.
- Page 6 2. Plug the other end of the meter connector into your OneTouch meter. You will need: Glooko MeterSync Blue and the meter connector. 3. Plug one end of the meter connector into the audio 1. Depending on if you’re a new or returning user, press port of the Glooko MeterSync Blue.
- Page 7 ReliOn® meters You will need: Glooko MeterSync Blue, meter connector, and 2.5 mm adapter. 1. Depending on if you’re a new or returning user, press Sync > Select your Device from the list, or add a New Device 2. Plug one end of the meter connector into the audio port of the Glooko MeterSync Blue.
-
Page 8: Troubleshooting
Troubleshooting Problem Possible Causes Solution Unable to Multiple Glooko MeterSync Blue Move to a place where there are no additional Glooko PAIR the devices are within range. MeterSync Blue devices and try to pair again. Glooko MeterSync Battery has run out of power. -
Page 9: Specifications
Specifications 2. Increase the separation between the equipment and the affected receiver. 1. Product Name: Glooko MeterSync Blue for iOS and 3. Connect the equipment and the affected receiver to Android power outlets on separate circuits. 2. Operating temperature: 50 - 100 °F 4. -
Page 10: Intended Use
Glooko connects to compatible diabetes medical devices and trackers to allow users to transfer their data to the Glooko system. Glooko is not intended to provide treatment decisions or to be used as a substitute for professional healthcare advice.
Need help?
Do you have a question about the MeterSync Blue and is the answer not in the manual?
Questions and answers