Heat Recovery DC Inverter Multi VRF Unit
(2) The total capacity of indoor units should be within 50%~135% of that of the outdoor unit.
(3) Outdoor units of Modular DC Inverter Heat Recovery System can be connected to multi VRF
indoor units, including cassette type unit, one-way cassette type unit, wall-mounted unit and
duct type unit, as shown in figure 2. When any one of the indoor units receives operating
command, outdoor unit will start operation as per required capacity. When all indoor units stop,
outdoor unit will be shut off. Please note that outdoor unit can't be connected to indoor unit
directly. Heat pump mode exchanger must be installed between outdoor unit and indoor unit.
GMV-Q1130WM/B-X
GMV-Q1180WM/B-X
GMV-Q1235WM/B-X
GMV-Q1300WM/B-X
GMV-Q1350WM/B-X
GMV-Q1410WM/B-X
GMV-Q1460WM/B-X
GMV-Q1515WM/B-X
GMV-Q1580WM/B-X
GMV-Q1630WM/B-X
GMV-Q1685WM/B-X
GMV-Q1750WM/B-X
GMV-Q1800WM/B-X
64
64
64
64
64
66
69
71
74
77
80
80
80
Figure 2
5
Need help?
Do you have a question about the GMV-Q224WM/B-X and is the answer not in the manual?