Electrical Connection - Miele DAR 1125 Operating And Installation Instructions

Hide thumbs Also See for DAR 1125:

Operating and installation instructions (40 pages)

Table Of Contents

Table of Contents

All electrical work should be under-

taken by a suitably qualified and

competent person in strict accord-

ance with current national and local

safety regulations (BS 7671 in the

UK).

Installation, repairs and other work

by unqualified persons could be dan-

gerous, for which the manufacturer

cannot be held liable.

Ensure power is not supplied to the

appliance until after installation or re-

pair work has been carried out.

Do not connect the appliance to the

mains electricity supply by an exten-

sion lead. These do not guarantee

the required safety of the appliance.

The connection data is given on the

data plate. This is visible when the

grease filters have been removed. En-

sure that this data matches the house-

hold mains supply.

Connection of this appliance should be

made via a suitable isolator or a double

pole fused spur connection unit which

complies with national and local safety

regulations and the On-Off switch

should be easily accessible after the

appliance has been built in. When

switched off there must be an all-pole

contact gap of 3 mm in the switch (in-

cluding switch, fuses and relays ac-

cording to EN 60335).