2-6-3 Multi Zone Setting ..........................8 2-7 Scene Setting..............................8 2-8 Scene Save and Recall ..........................9 2-9 Scene Duration Setting ..........................9 2-10 Motor Rotate Setting ..........................10 2-11 Check Software Version ..........................10 Limited Warranty ................................11 EDX-B02D [EUM-B]...
DMX: confirm button; FCN: function button; ▲▼◀ ▶ direction button 4、5、8 Signal input: Power indicator DMX-512/RS485 Communication indicator Counterclockwise shortcut button and indicator clockwise shortcut button Control output and indicator 1-5 Wiring Diagram AC Motor Wiring: E N V F R N EDX-B02D [EUM-B]...
Press 【FCN】after STEP-2 can stop initialization. 2-2 DMX Address Setting Standard DMX console can output 512 channels and EDX-B02D can use consecutive 2 channels out of them as the output channel. In these 2 channels, the first channel No. is start channel address.
2-4 Accept/Refuse DMX Signal STEP-1: On the main page, press【FCN】3 times to enter the screen: STEP-2: Press【▲】or【▼】to select ON/OFF: In which: ON—— Refuse external DMX signal OFF—— Accept external DMX signal STEP-4: After setting, press【DMX】to save, press 【FCN】to exit. EDX-B02D [EUM-B]...
In which: ON—Multi Zone state OF—Single Zone state STEP-3: After setting, press【DMX】to save, press 【FCN】to exit. 2-6-2 Single Zone Setting STEP-1: On the main page, press【FCN】once to enter single zone setting. The cursor will blink: Blink, zone is 1 EDX-B02D [EUM-B]...
Blink, start channel is 1 STEP-6: Press 【▲】or【▼】can choose start channel (Up to 255) STEP-7: After setting, press【DMX】to save, press 【FCN】to exit. 2-7 Scene Setting STEP-1: On the main page, press【FCN】five times to enter channel edit status. Blink, channel 1 EDX-B02D [EUM-B]...
STEP-2: Press【▲】 or【▼】to select scene No., and can select any scene (SC1-6) STEP-3: Press【◀ 】or【▶ 】to shift to scene duration setting status: Blink, scene duration scene is 10s STEP-4: Press【▲】 or【▼】to select scene duration(1-99s) or any one of infinity. EDX-B02D [EUM-B]...
Blink, motor operating time is 10s STEP-6: Press【▲】 or【▼】to select motor rotate time(1-99s) or any one of infinity STEP-7: After setting, press【DMX】to save, press 【FCN】to exit. 2-11 Check Software Version On the main page, press【FUNC】nine times to check the current software version. EDX-B02D [EUM-B]...
1. Lite-Puter is only responsible for the product itself. 2. Lite-Puter warrants to repair any manufacturing defects within one year of distribution date. 3. Lite-Puter does not offer on-site service. Should a defect appear in Lite-Puter’s product, please deliver the product to local distributors or Taiwan Headquarters.