BLU-JET AT6020 Assembly And Operators Manual
  1. Manuals
  2. Brands
  3. BLU-JET Manuals
  4. Farm Equipment
  5. AT6020
  6. Assembly and operators manual

BLU-JET AT6020 Assembly And Operators Manual

Commercial fertilizer injection applicator
Hide thumbs
Table of Contents

Advertisement

Quick Links

Commercial Fertilizer Injection Applicator
Assembly
and Operators
Manual
Manual Number
0606020
Rev. 2-19-18
AT6020
TM
$20.00 Net.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AT6020 and is the answer not in the manual?

Questions and answers

Related Manuals for BLU-JET AT6020

Summary of Contents for BLU-JET AT6020

  • Page 1 AT6020 Commercial Fertilizer Injection Applicator Assembly and Operators Manual Manual Number 0606020 Rev. 2-19-18 $20.00 Net.
  • Page 2 1708 H Ave • Box 218 • Thurston, Nebraska, 68062-0218 Phone: 402-385-3041 E-mail: box218@thurstonmfgco.com • Design specifications and features as described are subject to change without notice. BLU-JET is a registered trademark of Thurston Manufacturing Company, Thurston NE. /SIronWorks @SIronWorks...

  • Page 3: Table Of Contents

    Anhydrous Ammonia Operating Instructions--------------------------------------------------------- 19 Coupler Operation---------------------------------------------------------------------------------------------- 22 Parts----------------------------------------------------------------------------------------------------------------- 23 Emergency Fresh Water Tank--------------------------------------------------------------------------------- 23 Operational Guide For Various Residue Situations BLU-JET StripTill Implement--------------- 24 Center Section Bundle 66000103 Parts List--------------------------------------------------------------- 35 Manual Number: Primary Wing Right-hand Bundle 66000103--------------------------------------------------------------- 40...

  • Page 4: Introduction

    Environmental, Safety, Quality, Production and Engineering keep our firm at the cutting edge of technology. We hope your BLU-JET equipment will give you years of service. ead this manual carefully. It will instruct you on how to operate and service your machine safely and correctly. Failure to do so could result in personal injury and/or equipment damage.
  • Page 5 The BLU-JET AT6020 Commercial Class Fertilizer Injection Applicator achieves a new performance dimension for high acre, high rate applications. The BLU-JET AT6020 can easily be configured for a number of operations including Pre-Plant, Side-Dress, and StripTill applications with anhydrous, liquid, dry, or dual placement fertilizer injection.

  • Page 6: Deliver

    Dealer Checklist AT6020 o The Dealer: Inspect the implement thoroughly after assembly to be certain it is functioning properly before delivering it to the customer. The following checklist is a reminder of points to cover. Check off each item as it is found satisfactory or after proper adjustment is made.

  • Page 7: To The Owner

    To The Owner AT6020 hank you for your recent purchase of a new BLU-JET implement. The primary objective of Thurston Manufacturing Company is to build and provide you with a quality product. However, in the event that a problem does occur, it is imperative that your warranty registration is on file in order to accurately respond to your specific service circumstances.

  • Page 8: Warranty

    Warranty begins from date of delivery to the original purchaser and applies to all new BLU-JET products that have not been altered and are being used for the intended purpose. Negligence, abuse or modification of equipment manufactured by or purchased and resold by Thurston Manufacturing Company will void this warranty.
  • Page 9 Safety AT6020 RECOGNIZE SAFETY INFORMATION • This is the safety-alert symbol. When you see his symbol on your machine or in this manual, be alert to the potential for personal injury. Follow recommended precautions and safe operating practices. FOLLOW SAFETY INSTRUCTIONS •...
  • Page 10 Safety AT6020 HIGHWAY AND TRANSPORT OPERATIONS • Plan your route to avoid heavy traffic. • Be a safe and courteous driver. Always yield to oncoming traffic in all situations, including narrow bridges, intersection, etc. • Be observant of bridge loading ratings. Do not cross bridges rated lower than the gross weight at which you are operating.
  • Page 11 Safety AT6020 Observe Safety Signs AP 2234-7-98 AP 2483-8-98 AP 2914 AP 222 8-90 AP 2469-7-98...
  • Page 12 Safety Decals AT6020 AP2972 AP2227 AP2973 AP2975 AP2974...

  • Page 13: Operating Instructions

    Operating Instructions AT6020 Hitch 1. The tractor must be equipped with a drawbar and a draw- bar safety chain clevis. For rigid frame tractors equipped with swinging drawbar, the NOTE: drawbar must be located in a Implement fixed position in the center of hitch weights the tractor.
  • Page 14 Operating Instructions AT6020 Remote 5. Connect the toolbar hydraulic hoses to the tractor remote hydraulic couplers. The 1/2” hoses NOTE: supply oil to the toolbar lift Always cylinders. The 3/8” hoses connect the supply oil to the wing fold hoses so cylinders.
  • Page 15 Operating Instructions AT6020 9. Before leveling the machine Leveling the tire pressure should be Machine checked. Inflate center section lugged tractor tires to 56 P.S.I. Maximum Truck tires 95 P.S.I. Maximum Before beginning operation of this machine the main frame must be level.
  • Page 16 Operating Instructions AT6020 Tighten one inch Leveling 11. Check tire pressure before hex nuts after adjustable adjusting. wheel adjustment. Loosen the two 1” x 4” Hex bolts gauge at the top of the adjust linkage. wheels Loosen 1” hex nut on inside of NOTE: threaded rod.
  • Page 17 Operating Instructions AT6020 LOCKED POSTION DEPTH ADJUSTMENT One complete revolution equals 1/2” of depth increase. LOCKING DEPTH ADJUSTMENT LINKAGE Rotate depth control adjuster latch over handle and lock in place with (27) (BP3376) 1/4” x 2” wire retaining pin.
  • Page 18 Operating Instructions AT6020 Nurse tank 14. Nurse tank hitch can be retracted and moved from hitch side to side for easy hookup. NOTE: Hitch will automatically lock Periodically in the extended position. check Latch mechanism to WARNING ensure proper Pinch point...
  • Page 19 Operating Instructions AT6020 17. Lug nut Torque Lug Nut 17. Lubrication 1. Check every hour first four • Torque Grease all zerks daily hours. • Grease coulters daily 2. Check every four hours to first twenty hours. 3. Check once every fifty hours Lift Wheel Pivot Zerk thereafter.
  • Page 20 Operating Instructions AT6020 Lubrication Zerks On Wing Gauge Wheel Pivot (Torque 100 ft./lbs.) Zerks On Linkage And Hinge Coulter 18. Grease all coulter arm pivots. pivot shaft lubrication Coulter 19. The plug on the coulter hub can be removed. A zerk can lubrication be installed.

  • Page 21: Anhydrous Ammonia Operating Instructions

    Anhydrous Ammonia Operating Instructions AT6020 Attend Anhydrous Ammonia Safety Training Class Provided By Your Dealer Before Operating this equipment . Operator protection Because of the hazards associated with handling Anhydrous Ammonia, operators must use proper protective equipment. Minimum equipment includes...
  • Page 22 Anhydrous Ammonia Operating Instructions AT6020 Disconnection Of Nurse Tank 1. With personal protective equipment in place, and beginning at the tank, fully shut off the supply hose valves. If the supply hose is a tank wagon component (as opposed to a tool bar component) an additional hand operated globe valve shut off located between the quick coupler and the Heat Exchanger feed line will significantly speed up the tank wagon change process.
  • Page 23 Safety Decals AT6020 AP2972 AP2227 AP2973 AP2975 AP2974...

  • Page 24: Coupler Operation

    Coupler Operations AT6020 NOTE: Coupler release handle Read coupler Female coupler operation Male coupler neck decal (AP2974) Body Guard III for safety Flow Feed-line to tank instructions. Downstream Coupler bleed valve Male coupler half Check valve plunger Connecting 1. Stand on the upwind side. Close all feed-line valves and inspect all components for proper condition.

  • Page 25: Parts

    BP3158 WASHER, LOCK, 5/16”, PLATED BP3108 HEX CAP SCREW, 5/16”-18 X 1”, GRADE 5, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3351 U-BOLT, 3/8”-16 X 6”W X 7”L AP2215 DECAL, BLU-JET, 3” X 8”...

  • Page 26: Operational Guide For Various Residue Situations Blu-Jet Striptill Implement

    Operational Guide For Various Residue Situations BLU-JET StripTill Implement AT6020 Beans Coulter Blades • 3”-4” Deep (make sure hub is not running in the ground) (Soy or • If blades are new or being used for the first time in a season,...
  • Page 27 Operational Guide For Various Residue Situations BLU-JET StripTill Implement AT6020 For best results follow these operating recommendations: Corn • Leaving standing stalks in the field when harvesting (about Grain under knee high) is preferable to shredding the residue 250 bushel •...
  • Page 28 Operational Guide For Various Residue Situations BLU-JET StripTill Implement AT6020 For best results follow these operating recommendations: Corn • Leave standing stalks do not shred the residue in the field when Grain over harvesting (about knee high) 250 bushel • Row units on the machine should be operated between last (in one year year’s corn rows (split last year’s rows)
  • Page 29 Operational Guide For Various Residue Situations BLU-JET StripTill Implement AT6020 For best results follow these operating recommendations: Corn • Leave standing stalks do not shred the residue in the field when Grain under harvesting (about knee high) 250 bushel • Row units on the machine should be operated 7.5” to one side (in 2+ years of last year’s corn row (RTK guidance recommended)
  • Page 30 Operational Guide For Various Residue Situations AT6020 BLU-JET StripTill Implement For best results follow these operating recommendations: Corn • Leave standing stalks do not shred the residue in the field when Grain over harvesting (about knee high) 250 bushel • Row units on the machine should be operated 7.5” to one side (in 2+ years of last year’s corn row (RTK guidance recommended)
  • Page 31 Operational Guide For Various Residue Situations BLU-JET StripTill Implement AT6020 For best results follow these operating recommendations: Corn • Row units on the machine should be operated at least 7.5” off of Silage any corn row where root ball masses remain mostly intact Coulter Blades •...
  • Page 32 Operational Guide For Various Residue Situations AT6020 BLU-JET StripTill Implement Coulter Blades Cover • 3”-4” Deep (make sure hub is not running in the ground) Crop • If blades are new or being used for the first time in a season,...
  • Page 33 Operational Guide For Various Residue Situations BLU-JET StripTill Implement AT6020 Sugar Coulter Blades • 3”-4” Deep (make sure hub is not running in the ground) Beets • If blades are new or being used for the first time in a season, or if residue is hair pinning, sharpening each blade will assist in cutting during the first few acres of operation.
  • Page 34 Operational Guide For Various Residue Situations BLU-JET StripTill Implement AT6020 Coulter Blades Wheat & • 3”-4” Deep (make sure hub is not running in the ground) Other • If blades are new or being used for the first time in a season,...
  • Page 35 Setting the Implement for field operation: BLU-JET StripTill Implement AT6020 Run the implement in the field for approximately 100 feet (making sure the tractor reaches the speed at which you wish to operate the machine). Stop while leaving the shanks in the ground.
  • Page 36 Setting the Implement for field operation: BLU-JET StripTill Implement AT6020 There is a heavy and light spring pressure setting. Be sure that all Residue Managers are set on the same pressure setting. Lift up on the Residue Managers to gauge pressure if settings are the same, but you suspect the spring pressure is different.

  • Page 37: Center Section Bundle 66000103 Parts List

    Center Section Area of Bundle 66000103 AT6020 BOM ID Item No Description 66000103 AT6020 MAIN FRAME & PRIMARY WINGS AAM2140 PERFECT HITCH ASSEMBLY, CAT IV/V, W/MTG HARDWARE AP3127 PERFECT HITCH ASSEMBLY, CAT IV-V BP3020 WASHER, LOCK, 1, PLATED BP3275 NUT, HEX, 1”-8, GRADE 8, PLATED BP3448 HEX CAP SCREW, 1’-8 X 8”, GRADE 8, PLATED...
  • Page 38 DECAL, FEMA, 2-1/2” X 1-1/2” AP2234 DECAL, DANGER STAND CLEAR FALLING WING AP2469 DECAL, SAFETY CHAIN AP2483 DECAL, DANGER, FALLING FROM EQUIPMENT AP2558 DECAL, AT6020 COMMERCIAL CLASS APPLICATOR AP2711 SNAP RING, 1-1/4” EXTERNAL, HEAVY DUTY AP2871 HOSE RETAINER AP2914 DECAL, WARNING, HIGH-PRESSURE FLUID AP4391 TRANSPORT CHAIN, 60,000#, 5/8’’...
  • Page 39 Center Section Area of Bundle 66000103 AT6020 BM3565 PIN, 2” X 10-1/4” OAL, W/ 21/32” HOLE, PLATED BM3610 PIN, 1-3/4” X 6-1/8” USEABLE W/ANTI-ROTATION HEAD BM3664 PIN, 1-3/4” X 16-9/16” OAL, W/ 21/32” HOLE BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED...
  • Page 40 Center Section Area of Bundle 66000103 AT6020 NOTE: AAM4768, turnbuckle assembly: Double nut to hitch weldment...
  • Page 41 HOSE RETAINER, CLOSED LOOP, 6” & 7” MOUNTING BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED BP3045 U-BOLT, 3/8”-16 X 6”W X 5”L, PLATED AAM2929 ADJUSTMENT LINKAGE, AT6020 DEPTH CONTROL AAM4768 ASSEMBLY, TURNBUCKLE AM2518 JACK, 9TWDL AM2526 CRANK W/ GRIP, 90 LONG AM4528...

  • Page 42: Primary Wing Right-Hand Bundle 66000103

    AT6020 BOM ID Item No Description AAM2639 MANUAL HOLDERW/ 6X4 MOUNTING AAM2928 STOP ARM, W/ PLUNGER, DEPTH CONTROL AAM2929 ADJUSTMENT LINKAGE, AT6020 DEPTH CONTROL AAM4768 ASSEMBLY, TURNBUCKLE AM2144 HITCH, CLEVIS AM2145 BRACKET, HITCH STORAGE, 6” MOUNTING AM2197 BRACKET, WRENCH STORAGE AM4015 HOSE RETAINER, CLOSED LOOP, 6”...
  • Page 43 Center Section Area of Bundle 66000103 AT6020 AM6182 LINKAGE, TONGUE CYLINDER ARM BP3072 GREASE ZERK, 1/4”-28 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL AM6183 LINKAGE, TONGUE CYLINDER AM6263 BRACKET, PIVOT, DEPTH CONTROL AM6264 ARM, VALVE, DEPTH CONTROL AM6266...

  • Page 44: Primary Wing Left-Hand Bundle 66000103

    Center Section Area of Bundle 66000103 AT6020 BOM ID Item No Description 66000103 AT6020 MAIN FRAME & PRIMARY WINGS AAM2438 HOSE RETAINER ASSEMBLY, CLOSED LOOP, 6X6 TUBE AM4015 HOSE RETAINER, CLOSED LOOP, 6” & 7” MOUNTING BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED...
  • Page 45 Center Section Area of Bundle 66000103 AT6020 BOM ID Item No Description AAM4768 ASSEMBLY, TURNBUCKLE AM7222 TURNBUCKLE CENTER AM7239 TURNBUCKLE SCREW, RIGHT HAND TREADS WITH 4” TUBE AM7240 TURNBUCKLE SCREW, LEFT HAND THREADS WITH 2-1/8” TUBE BP3281 NUT, HEX, 2”- 4.5 RIGHT HAND THREADS...

  • Page 46: Center Section Bundle 66000103 Exploded Views

    Center Section Area of Bundle 66000103 AT6020 Depth Control Parts...
  • Page 47 ARM, STOP, DEPTH CONTROL AP2193 SPRING, 1.4” OD X 3” OAL, LHC 177P 02M BP3162 PIN, ROLL, 3/8” X 2”, PLATED AAM2929 ADJUSTMENT LINKAGE, AT6020 DEPTH CONTROL AM6267 LINKAGE BODY, AT6020 DEPTH CONTROL ADJUSTMENT AM6268 ROD END, 3/4” BALL JOINT, 3/4”-16LH X 5”...
  • Page 48 HOSE RETAINER, CLOSED LOOP, 6” & 7” MOUNTING AM4415 HOSE RETAINER, OPEN LOOP AM4442 HOSE RETAINER, CLOSED LOOP AM4517 WING LOCK AM4524 ROCKER, AT6020 BP3072 GREASE ZERK, 1/4”-28 BP3560 TENSION BUSHING, 1-1/2”X 1-1/4” X 1” OAL AM4529 SAFETY LAUNCH TRIP, PRIMARY WING, AT 5000 AM4564...
  • Page 49 TENSION BUSHING, 2” X 1-3/4” X 1-1/2” OAL AM6188 WING, PRIMARY, RH, AT6010 BP3072 GREASE ZERK, 1/4”-28 AP2215 DECAL, BLU-JET, 3” X 8” AP2234 DECAL, DANGER STAND CLEAR FALLING WING AP2711 SNAP RING, 1-1/4” EXTERNAL, HEAVY DUTY BM3485 PIN, 1-3/4” X 12-1/8” OAL, W/ 21/32” HOLE, PLATED...

  • Page 50: Center Section Bundle 66000103 Depth Control Parts

    HOSE RETAINER, CLOSED LOOP, 6” & 7” MOUNTING AM4415 HOSE RETAINER, OPEN LOOP AM4442 HOSE RETAINER, CLOSED LOOP AM4517 WING LOCK AM4524 ROCKER, AT6020 BP3072 GREASE ZERK, 1/4”-28 BP3560 TENSION BUSHING, 1-1/2”X 1-1/4” X 1” OAL AM4529 SAFETY LAUNCH TRIP, PRIMARY WING, AT 5000 AM4564...
  • Page 51 TENSION BUSHING, 2” X 1-3/4” X 1-1/2” OAL AM6187 WING, PRIMARY, LH, AT6010 BP3072 GREASE ZERK, 1/4”-28 AP2215 DECAL, BLU-JET, 3” X 8” AP2234 DECAL, DANGER STAND CLEAR FALLING WING AP2711 SNAP RING, 1-1/4” EXTERNAL, HEAVY DUTY BM3485 PIN, 1-3/4” X 12-1/8” OAL, W/ 21/32” HOLE, PLATED...

  • Page 52: Secondary Wing Right-Hand With Hydraulic Gauge Wheel Bundle 66000107

    Secondary Wing Right-hand with Hydraulic Gauge Wheel AT6020 AAM2800 Bundle Number: 66000107 (Secondary Wings, Expandable, Right Side) NOTE: AAM2800 (With tapered wheel nuts) 295/75R22.5 gauge wheel tires. Do not use AM 4597 with tapered wheel nuts. AAM2800-1 AM 4597 NOTE:...
  • Page 53 WING REST & LATCH, 180 DEGREE FOLD AM6189 LINKAGE, SECONDARY FOLD BP3072 GREASE ZERK, 1/4”-28 AP2215 DECAL, BLU-JET, 3” X 8” AP2711 SNAP RING, 1-1/4 EXTERNAL, HEAVY DUTY BM3497 PIN, 1-3/4” X 14-3/4” OAL BM3548 PIN, 1-1/4” X 4-3/4”, DOUBLE GROOVED, PLATED BM3555 HEX BOLT, 1”-8 X 7-5/16”, FULL THREAD WELDED HEAD...

  • Page 54: Secondary Wing Left-Hand With Hydraulic Gauge Wheel Bundle 66000107

    Secondary Wing Left-hand with Hydraulic Gauge Wheel AT6020 Bundle Number: AAM2800 66000107 (Secondary Wings, Expandable, Left Side) NOTE: AAM2800 (With tapered wheel nuts) 295/75R22.5 gauge wheel tires. Do not use AM 4597 with tapered wheel nuts. AAM2800-1 AM 4597 NOTE:...
  • Page 55 WING REST & LATCH, 180 DEGREE FOLD AM6189 LINKAGE, SECONDARY FOLD BP3072 GREASE ZERK, 1/4”-28 AP2215 DECAL, BLU-JET, 3” X 8” AP2711 SNAP RING, 1-1/4” EXTERNAL, HEAVY DUTY BM3497 PIN, 1-3/4” X 14-3/4” OAL BM3548 PIN, 1-1/4” X 4-3/4”, DOUBLE GROOVED, PLATED BM3555 HEX BOLT, 1”-8 X 7-5/16”, FULL THREAD WELDED HEAD...

  • Page 56: Dual Wheel Lift Bundle 66000105

    Dual Wheel Lift Bundle 66000105 (30” Row Spacing) AT6020 Bundle Number: 66000105 (AT6020 Single Wheel) Right-hand and Left-hand as viewed from the rear Right-hand Left-hand Right-hand NOTE: Valve stem on each wheel is positioned to the inside of the dual on 30” and 15”.
  • Page 57 Dual Wheel Lift Bundle 66000105 (30” Row Spacing) AT6020 66000105 Dual Wheel Lift BOM ID Item No Description AAM2914 WHEEL, 12.4 X 38, 14 PLY 38 X 10 X 8, LEFT HAND ASSEMBLY AP2790 VALVE STEM, METAL AP2867 TIRE, 12.4 X 38, 14 PLY, TRACTION GRIP...

  • Page 58: Pin Adjust Gauge Wheel Bundle 55000100

    Gauge Wheel With Pin Adjust & 25 x 7.50 x 15 Tire & Rim AT6020 Part of Bundle Number: 66000106 Bundle Number 55000100 (Pin Adjust Gauge Wheel) Tractor side of tool bar 55000100 GAUGE WHEEL, PIN ADJUST 6 X 6 MOUNTING, 25-750-6-6 1 PAIR...

  • Page 59: 48' And 60' Complete Toolbar Drawings

    AT6020, 48’ and 60’ Toolbars AT6020 AT6020 48’ AT6020 60’...

  • Page 60: Hydraulics 60

    AT6020 60’ Hydraulics PKG000238 Package, Hydraulic, AT6020 Base, Up To 48’ AT6020 Right-hand From The Rear...
  • Page 61 AT6020 60’ Hydraulics PKG000238 Package, Hydraulic, AT6020 Base, Up To 48’ AT6020 BOM ID Qty Item No Description PKG00238 PACKAGE, HYD, AT6020 BASE, UPTO 48’ AM2090 BRACKET, DEPTH COLLAR & LOCKUP STORAGE AM6159 BRACKET, MOUNTING, FLOW DIVIDER VALVE AM6280 TRANSPORT CYLINDER LOCK, 1-3/4” & 2” ROD, 12”...
  • Page 62 AT6020 60’ Hydraulics PKG00238, Hydraulic Package Base, Up To 48’ AT6020 BOM ID Qty Item No Description DP4496 HOSE, HYD, 1/2 X 114, 10FJX-10FJX DP5001 HOSE, HYD, 1/2 X 168, 10FJX-10FJX DP5055 HOSE, HYD, 1/4 X 66, 6FJX-6FJX DP5184 HOSE, HYD, 1/2 X 192, 10FJX-10FJX...
  • Page 63 AT6020 60’ Hydraulics PKG00238, Hydraulic Package Base, Up To 48’ AT6020 Right-hand From The Rear...
  • Page 64 AT6020 60’ Hydraulics AT6020 PKG00238, Hydraulic Package Base, Up To 48’ Left-hand From The Rear...

  • Page 65: Hydraulics 48

    AT6020 48’ Hydraulics AT6020 BOM ID Qty Item No Description PKG00238 PACKAGE, HYD, AT6020 BASE, UPTO 48’ AM2090 BRACKET, DEPTH COLLAR & LOCKUP STORAGE AM6159 BRACKET, MOUNTING, FLOW DIVIDER VALVE AM6280 TRANSPORT CYLINDER LOCK, 1-3/4” & 2” ROD, 12” BM3520...
  • Page 66 AT6020 48’ Hydraulics AT6020...
  • Page 67 AT6020 48’ Hydraulics AT6020 Left-hand From The Rear Right-hand From The Rear...
  • Page 68 AT6020 48’ Hydraulics AT6020 BOM ID Qty Item No Description DP4496 HOSE, HYD, 1/2 X 114, 10FJX-10FJX DP5001 HOSE, HYD, 1/2 X 168, 10FJX-10FJX DP5055 HOSE, HYD, 1/4 X 66, 6FJX-6FJX DP5184 HOSE, HYD, 1/2 X 192, 10FJX-10FJX DP5186 HOSE, HYD, 1/2 X 132, 10FJX-10FJX...
  • Page 69 AT6020 48’ Hydraulics AT6020...
  • Page 70 AT6020 48’ Hydraulics AT6020 Right-hand From The Rear...
  • Page 71 AT6020 48’ Hydraulics AT6020 Left-hand From The Rear...

  • Page 72: Third Wing Bundle 66000108 Left Side

    Third Wing Left Side Bundle 66000108 AT6020 Bundle Number: 66000108 Left Side...
  • Page 73 WASHER, LOCK, 3/4”, PLATED BP3034 NUT, HEX, 3/4”-10, GRADE 2, PLATED BP3500 PIN, HAIR CLIP, 3/16” AP2215 DECAL, BLU-JET, 3” X 8” BM3816 PIN, 1-1/4” X 9-13/16” OAL, WITH 13/32” HOLE, PLATED BP3096 HEX CAP SCREW, 3/8”-16 X 2-1/2”, GRADE 5, PLATED CP2660...

  • Page 74: Third Wing Bundle 66000108 Right Side

    Third Wing Right Side Bundle 66000108 AT6020 Bundle Number: 66000108 Right Side...
  • Page 75 WASHER, LOCK, 3/4”, PLATED BP3034 NUT, HEX, 3/4”-10, GRADE 2, PLATED BP3500 PIN, HAIR CLIP, 3/16” AP2215 DECAL, BLU-JET, 3” X 8” BM3816 PIN, 1-1/4” X 9-13/16” OAL, WITH 13/32” HOLE, PLATED BP3096 HEX CAP SCREW, 3/8”-16 X 2-1/2”, GRADE 5, PLATED CP2660...

  • Page 76: Stagger Brackets Offset 6 X 6 Mounting

    Stagger Brackets Offset 6” x 6” Mounting AT6020 BOM ID Item No Description AAM2141 BRACKET, OFFSET STAGGER, 22 X 8, 6 X 6, W/ HARDWARE AM4510 BRACKET, OFFSET STAGGER, 22 X 8 BP3350 U-BOLT, 3/4”-10 X 6”W X 7-11/16”L, PLATED BP3034 NUT, HEX, 3/4”-10, GRADE 2, PLATED...

  • Page 77: Stagger Bracket 40 X 48 Double, (Aam2125)

    Stagger Brackets Offset 6” x 6” Mounting AT6020 NOTE: Consult row spacing diagram for placement of offset stagger brackets. BOM ID Qty Item No Description AAM2122 BRACKET, OFFSET STAGGER, 33 X 20, 6 X 6, W/HARDWARE AM4509 BRACKET, OFFSET STAGGER, 33X20 BP3034 NUT, HEX, 3/4”-10 GRADE 2, PLATED...

  • Page 78: Offset Stagger Bracket (Aam2136)

    AAM2136 Offset Stagger Bracket AT6020 BOM ID Item No Description AAM2136 BRACKET, OFFSET STAGGER EXTENSION, 48”, 6 X 6 TUBE AM6185 BACKING PLATE, NURSE TANK HITCH MTG, 6” MOUNT AM6192 EXTENSION, STAGGER, 48”, 6” MTG BP3019 NUT, HEX, 1”-8, GRD 2, PLTD...

  • Page 79: Super 1200 Flex Coulter And Shank

    CASTING, COULTER KNEE, MACHINED AM2796 SPRING CAP & GUIDE, HD COULTER AM2797 COULTER ARM, HD AP2216 DECAL, BLU-JET, SMALL, 1-1/2” X 4” AP2029 PIN, COTTER, 5/32” X 1-1/2” AP2704 NUT, SPINDLE, 3/4”-16 AP2705 WASHER, SPINDLE, 1-1/2” X 13/16” X .134”...

  • Page 80: Nurse Tank Hitch Assembly Pkg00234

    PKG00234 Nurse Tank Hitch Assembly Parts AT6020 BOM ID Item No Description PKG00234 NURSE TANK HITCH ASSEMBLY, AT6020 AAM2931 ASSEMBLY, NURSE TANK HITCH, AUTO-LOK, W/O PIN AM6220 BRACKET, HITCH MOUNTING, AT6010 NURSE TANK AM6273 BRACKET, NURSE TANK HITCH MOUNTING, LOW AM6278 LINKAGE, NURSE TANK HITCH, 12-3/4”...

  • Page 81: Nurse Tank Hitch Assembly, Low Mounting Pkg00247

    Description PKG00247 NURSE TANK HITCH ASSEMBLY, AT6, LOW MOUNTING AAM2931 ASSEMBLY, NURSE TANK HITCH, AUTO-LOK, W/O PIN AM6234 BRACKET, LOW HITCH MOUNTING, AT6020 NURSE TANK AM6273 BRACKET, NURSE TANK HITCH MOUNTING, LOW AM6278 LINKAGE, NURSE TANK HITCH, 12-3/4” AP2711 SNAP RING, 1-1/4” EXTERNAL, HEAVY DUTY BM3544 PIN, 1-1/4”...

  • Page 82: Auto-Lok Nurse Tank Hitch (Aam2831)

    Auto-Lok Nurse Tank Hitch AAM2931 Parts AT6020...
  • Page 83 Auto-Lok Nurse Tank Hitch AAM2931 Parts AT6020 BOM ID Item No Description AAM2931 ASSEMBLY, NURSE TANK HITCH, AUTO-LOK, W/O PIN AM4533 HITCH, SWING SLIDE INSERT, STANDARD AM4534 FLIPPER HITCH, STANDARD, NURSE TANK HITCH AM4539 SAFETY LATCH AM4540 BACKING PLATE, SAFETY CHAIN LOOP, STD NURSE TANK HITCH...

  • Page 84: Blades

    Blades AT6020 Coulter Blade Fluted Blade 20” AP2701 SealPro (Disc Sealer) Blade Options AM2479 AM2473 AP2728 17” Notched Blade 18” hoe wheel 17” wavy...

  • Page 85: Sealpro Ll And Sealpro Skf

    SealPro (AAM2855) Disc Sealer 1” x 2” Shank Parts AT6020 AAM2855 SEALER II, 1” X 2” SHANK, 1 ROW BOM ID Item No Description AM2481 ASSEMBLY, SEALER HANGER WITH BLADE MOUNTING AM2485 ASSEMBLY, SEALER MOUNTING BRACKET AM2484 BRACKET, SEALER MOUNTING BM3643 PIN, 1-1/4”...
  • Page 86 SealPro II (AAM2856) Disc Sealer 1-1/4” EdgeBent Shank AT6020 AAM2856 SEALER II, 1-1/4” EDGEBENT SHANK, 1 ROW BOM ID Item No Description AM2481 ASSEMBLY, SEALER HANGER WITH BLADE MOUNTING AM2485 ASSEMBLY, SEALER MOUNTING BRACKET AM2484 BRACKET, SEALER MOUNTING BM3643 PIN, 1-1/4” X 12-1/2” OAL, SEALER SHAFT BP3003 NUT, HEX LOCK, 3/8”-16, GRADE 2, PLATED...
  • Page 87 AT6020 AAM2481 ASSEMBLY, SEALER HANGER WITH BLADE MOUNTING BOM ID Item No Description AM2482 HUB CAP RETAINER AP2216 DECAL, BLU-JET, SMALL, 1-1/2” X 4” AP2377 BEARING CONE, L44649 AP2380 HUB CAP AP2426 PIN, COTTER, 5/32” X 1-3/4” AP2811 NUT, SPINDLE, 1”-14...
  • Page 88 GREASE ZERK, 1/4”-28 AM2751 SEALER ARM, RH, GREASEABLE, 2 POSITION BP3072 GREASE ZERK, 1/4”-28 AP2216 DECAL, BLU-JET, SMALL, 1-1/2” X 4” AP4581 BEARING UNIT, ADH 7546 BP3041 HEX CAP SCREW, 1/2”-13 X 2”, GRADE 5, PLATED BP3042 NUT, HEX, 1/2”-13, GRADE 2, PLATED BP3043 WASHER, LOCK, 1/2”,PLATED...
  • Page 89 GREASE ZERK, 1/4”-28 AM2751 SEALER ARM, RH, GREASEABLE, 2 POSITION BP3072 GREASE ZERK, 1/4”-28 AP2216 DECAL, BLU-JET, SMALL, 1-1/2” X 4” AP4581 BEARING UNIT, ADH 7546 BP3041 HEX CAP SCREW, 1/2”-13 X 2”, GRD 5, PLTD BP3042 NUT, HEX, 1/2”-13, GRD 2, PLTD BP3043 WASHER, LOCK, 1/2”, PLTD...
  • Page 90 SealPro II (AAM2857) Assembly, Optional Sealer II Spring Add-on Kit 1 Row AT6020 AAM2857 OPTIONAL SEALER II SPRING ADD-ON KIT 1 ROW BOM ID Item No Description AM2488 CLEVIS, SEALER SPRING, UPPER AM2489 CLEVIS, SEALER SPRING, LOWER AM2490 TUBE, UPPER SPRING...
  • Page 91 SealPro II (AAM2857) Assembly, Optional Sealer II Spring Add-on Kit 1 Row AT6020 Mount (2) (AM2489) sealer Front Mounting spring clevis lower to arm Spring with clevis hole to the front. Install (11) (BP3126) 1/2” x Add-on Kit 1-1/2” grade 5, hex cap screw.

  • Page 92: Hitches

    Hitches AT6020 Ref. Part No. Req. Description AM2144 Fabricated Truck Hitch AAM2424 HITCH STORAGE BRACKET BOM ID Item No Description AM2145 BRACKET, HITCH STORAGE, 6” MOUNTING BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED BP3045 U-BOLT, 3/8”-16 X 6”W X 5”L BP3500 PIN, HAIR CLIP, 3/16”...

  • Page 93: Jack

    AM2518 Top Wind Drop Leg Jack AT6020 AM2518 JACK, 9TWDL (TOP WIND DROP LEG) BOM ID Item No Description AM2524 INTERMEDIATE TUBE WITH PLUNGER ASSEMBLY AM2525 DROP LEG WITH PAD & HANDLE AM2534 SCREW ASSEMBLY EM1736 BEARING SEAT AM2539 TOP TUBE WITH BOLT ON MOUNTING AP2407 SNAP RING, 1”...

  • Page 94: Shanks

    Shanks AT6020 BOM ID Item No Description AP2063 SHANK, 1” X 2” FLAT BOM ID Item No Description AP2125 SHANK, 1-1/4” X 2” EDGEBENT...

  • Page 95: Row Clamps

    Row Clamp AT6020 AAM2131 1” x 2” Rigid With Shank & Coulter Mount 6” x 6” BOM ID Item No Description AM2148 CLAMP, SQUARE HOLE, 6” MOUNTING AM2188 BACKING PLATE AM2742 BRACKET, UNIVERSAL COULTER, 6” VERTICAL MOUNTING AP2063 SHANK, 1” X 2” FLAT AP2283 HOSE RETAINER, 6”...
  • Page 96 AAM2133 1” x 2” SCS With Shank & Coulter AT6020 AAM2133 Row Clamp 1” x 2” SCS With Shank & Coulter Mount 6” x 6” BOM ID Item No Description AM2189 ASSEMBLY, SPRING BUNDLE, 1 X 2 SHANK 6” x 6” Hose Retainer,...
  • Page 97 AAM2134 1-1/4” SCS With Shank & Coulter AT6020 AAM2134 Row Clamp 1-1/4” EdgeBent SCS With Shank & Coulter Mount 6” x 6” BOM ID Item No Description 6” x 6” Hose Retainer, AM2155 ASSEMBLY, SPRING BUNDLE, EDGEBENT SHANK (AP2283-1) Place...

  • Page 98: Manual Holder

    Manual Holder AT6020 AAM2640 MANUAL HOLDER WITH 6” X 6” MOUNTING BOM ID Item No Description AM7640 BRACKET, MOUNTING, MANUAL HOLDER AP4254 MANUAL HOLDER BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED BP3006 HEX CAP SCREW, 3/8”-16 X 1”, GRADE 5, PLATED BP3351 U-BOLT, 3/8”-16 X 6”W X 7”L, PLATED...

  • Page 99: Impellicone Mounting Hardware

    Impellicone and Mounting Hardware AT6020 AAM2635 IMPELLICONE 13 PORT, MOUNT & HARDWARE, 6” X 6” BOM ID Item No Description AM7639 BRACKET, IMPELLICONE MOUNT CP2310 1’’ HOSE BARB BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED BP3351 U-BOLT, 3/8”-16 X 6”W X 7”L...

  • Page 100: Supershooter

    SuperShooter III Parts AAM3514 AT6020...
  • Page 101 AM7661 COUPLER RELEASE HANDLE AP2227 DECAL, SAFETY INSTRUCTION, NH3 AP2418 SPRING RETAINER WASHER AP2972 DECAL, BLU-JET SUPER SHOOTER III AP2973 DECAL, SUPERSHOOTERS III, HOOK-UP INSTRUCTIONS AP2974 DECAL, SUPERSHOOTER III, SQUIBB COUPLER OPERATION BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED...

  • Page 102: Supershooter Iii Add-On Parts 66000136 Single Assembly

    SuperShooter III Add-on Parts 66000136 Single Assembly AT6020 BOM ID Qty Item No Description 66000136 SUPERSHOOTER III SINGLE ASSEMBLY, LESS DISTRIBUTION AAM3514 SUPERSHOOTER III/ SQUIBB COUPLER/ BODYGUARD III AM6277 SUPERSHOOTER RISER, AUTO-LOK HITCH BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED...
  • Page 103 SuperShooter III Add-on Parts 66000136 Single Assembly With GDI AT6020 BOM ID Item No Description 66000136 SUPERSHOOTER III SINGLE ASSEMBLY, LESS DISTRIBUTION AM4553 HEAT EXCHANGER MOUNTING, AT5000 BP3038 NUT, HEX, 5/8”-11, GRADE 2 BP3039 WASHER, LOCK, 5/8”, PLATED CCP2755 HEAT EXCHANGER ASSEMBLY, GDI 200A CP2520 HOSE, NH3, 1-1/4”...

  • Page 104: Supershooter Iii Add-On Parts (66000137) Dual Assembly

    SuperShooter III Add-on Parts Dual Assembly 66000137 and 66000136 AT6020...
  • Page 105 SuperShooter III Add-on Parts Dual Assembly 66000137 and 66000136 AT6020 BOM ID Item No Description 66000136 SUPERSHOOTER III SINGLE ASSY, LESS DISTRIBUTION AAM3514 SUPERSHOOTER III/ SQUIBB COUPLER/ BODYGUARD III AM6277 SUPERSHOOTER RISER, AUTO-LOK HITCH BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED...

  • Page 106: Gdi With Pump Distribution (Rear Mount) (Bundle 20200119)

    GDI 200 W/Pump Distribution (Rear Mount) Parts (Bundle 20200119) AT6020 BOM ID Item No Description 55000171 KIT, HEAT EXCHANGER, REAR OF FRAME MOUNT AAM2089 ASSEMBLY, SPRING ADJUSTER AAM2707 ASSEMBLY, HUB & SPINDLE, 511 HUB, 1-3/4” X 13” AAM2750 WHEEL 5.00-15.4, 4 PLY 15 X 5 X 5, WHITE, 4 HOLE AM2021 ADAPTER PLATE &...
  • Page 107 GDI 200 Pump Distribution (Rear Mount) Parts (Bundle 20200119) AT6020 NOTE: Typical Layout, Hose lengths and component locations will vary by machine. Generic Drawing GDI placement will depend on row spacing. BOM ID Item No Description GDI 200, REAR MOUNT, 6” X 6” FRAME...
  • Page 108 GDI 200 W Pump Distribution (Rear Mount) Parts and Assembly (Bundle 20200119) AT6020 Ref. Part No. Required. Description 55000171 1 Kit Heat Exchanger, Rear BOM ID Item No Description 55000171 KIT, HEAT EXCHANGER, REAR OF FRAME MOUNT AM4015 HOSE RETAINER, CLOSED LOOP, 6” & 7” MOUNTING...

  • Page 109: Heat Exchanger (Ccp2755)

    Parts List & Assembly For CCP2755 Heat Exchanger AT6020 AP2236 AP2262 AP2263 AP2253 AP2227 AP2262 CCP2755 Heat Exchanger Assembly BOM ID Item No Description AP2209 DECAL, CAUTION, GROUND DRIVE WHEEL, AP2227 DECAL, SAFETY INSTRUCTION, NH3 AP2236 DECAL, NH3 DANGER AP2253...
  • Page 110 GDI 200 W/ Pump Distribution (Rear Mount) Parts (Bundle 20200119) AT6020 13. CCP2756 GDI 200A, Pump & Valve Assembly BOM ID Item No Description CCP2756 GDI 200A, PUMP AND VALVE ASSEMBLY CP2898 VALVE, SHUTOFF CP2899 PUMP, NH3 BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED...
  • Page 111 GDI 200 W/Pump Distribution (Rear Mount) Parts (Bundle 20200119) AT6020 BOM ID Item No Description AAM2089 ASSEMBLY, SPRING ADJUSTER AM2165 BRACKET, ROTARY TENSION ARM MOUNT AM2180 UNIVERSAL PUMP MOUNTING PLATE AM2181 GROUND DRIVE WHEEL FRAME AM3326 BRACKET, PUMP EXTENSION AM4856 BRACKET, MOUNTING, 6”...
  • Page 112 GDI 200 W/ Pump Distribution (Rear Mount) Parts (Bundle 20200119) AT6020 Attaches To Hose Barb Not Pictured Ref. Part No. Req. Description 18. CP25009 E.V.A. Hose 3/8” x 8’ 19. CP3001 Hose, EVA, 1” Reinforced x 180” (15’) With Tie & Tag 20.
  • Page 113 GDI 200 W/ Pump Distribution (Rear Mount) Parts (Bundle 20200119) AT6020 BOM ID Item No Description CCP2755 HEAT EXCHANGER ASSEMBLY BP3038 NUT, HEX, 5/8”-11, GRADE 2 BP3039 WASHER, LOCK, 5/8”, PLATED BOM ID Item No Description CP2479 PLUG, SQUARE HEAD, 3/4” NPT CP2870 STRAINER, NH3, 1-1/4”...

  • Page 114: Gdi Withtwin Pump Distribution (Rear Mount)(Bundle 20200121)

    ASSEMBLY, SPRING ADJUSTER AAM2707 ASSEMBLY, HUB & SPINDLE, 511 HUB, 1-3/4” X 13” AAM2750 WHEEL 5.00-15.4, 4 PLY 15 X 5 X 5, WHITE, 4 HOLE AT6020 AM2021 GROUND DRIVE WHEEL ADAPTER PLATE & HUB AM2165 BRACKET, ROTARY TENSION ARM MOUNT...
  • Page 115 GDI 200 W/Twin Pump Distribution (Rear Mount) Parts (Bundle 20200121) AT6020 Consult GDI 200 Twin Manual for assembly instructions. Manual Number 0300001 Generic Drawing GDI placement will depend on row spacing..
  • Page 116 GDI 200 W/Twin Pump Distribution (Rear Mount) Parts and Assembly (Bundle 20200121) AT6020 Ref. Part No. Req. Description 55000171 1 Kit Heat Exchanger, Rear BOM ID Item No Description 55000171 KIT, HEAT EXCHANGER, REAR OF FRAME MOUNT AM4015 HOSE RETAINER, CLOSED LOOP, 6” & 7” MOUNTING...
  • Page 117 Parts List & Assembly For CCP2755 Heat Exchanger AT6020 AP2236 AP2262 AP2263 AP2253 AP2227 AP2262 CCP2755 Heat Exchanger Assembly BOM ID Item No Description AP2209 DECAL, CAUTION, GROUND DRIVE WHEEL, AP2227 DECAL, SAFETY INSTRUCTION, NH3 AP2236 DECAL, NH3 DANGER AP2253...
  • Page 118 GDI 200 W/Twin Pump Distribution (Rear Mount) Parts (Bundle 20200121) AT6020 13. CCP2758 GDI 200 Twin Pump & Valve Assembly BOM ID Item No Description CCP2758 GDI 200 TWIN, PUMP AND VALVE ASSEMBLY CP3017 PUMP, NH3 GDI 200 TWIN CP2898...
  • Page 119 GDI 200 W/Twin Pump Distribution (Rear Mount) Parts (Bundle 20200121) AT6020 BOM ID Item No Description AAM2089 ASSEMBLY, SPRING ADJUSTER AM2165 BRACKET, ROTARY TENSION ARM MOUNT AM2180 UNIVERSAL PUMP MOUNTING PLATE AM2181 GROUND DRIVE WHEEL FRAME AM3326 BRACKET, PUMP EXTENSION AM4856 BRACKET, MOUNTING, 6”...
  • Page 120 GDI 200 WithTwin Pump Distribution (Rear Mount) AT6020 Parts (Bundle 20200121) Attaches To Hose Barb Not Pictured Ref. Part No. Req. Description 26. CP25009 E.V.A. Hose 3/8” 8 Ft. 29. CP3001 Hose, EVA, 1” Reinforced x 180” (15’) With Tie & Tag 28.
  • Page 121 GDI 200 WithTwin Pump Distribution (Rear Mount) Parts (Bundle 20200121) AT6020 BOM ID Item No Description CCP2755 HEAT EXCHANGER ASSEMBLY BP3038 NUT, HEX, 5/8”-11, GRADE 2 BP3039 WASHER, LOCK, 5/8”, PLATED BOM ID Item No Description DP4086 CABLE TIE 11-3/8”...
  • Page 122 GDI 200 With Twin Pump Distribution (Rear Mount) Parts (Bundle 20200121) AT6020 Generic BOM ID Item No Description PKG00234 NURSE TANK HITCH ASSEMBLY 66000136 SUPERSHOOTER III SINGLE ASSEMBLY 66000137 DUAL SUPERSHOOTER III ADD-ON ASSEMBLY, WITH HARDWARE & HOSE AM4553 HEAT EXCHANGER MOUNTING...
  • Page 123 Meter Assembly GDI200A With Dual Impellicone Manifold, (66000121) 18 Row 30 AT6020 Extend to Gauge Extend BOM ID Item No Description to Knives 66000121 GDI200A W/DUAL IMPELLICONE MANIFOLD, AT60, 18R30 AAM2635 IMPELLICONE 13 PORT, W/ MOUNT & HARDWARE, 6 X 6...
  • Page 124 Meter Assembly GDI200A W/Dual Impellicone Manifold, AT6020 (55000151) 19 Row 30 Extend to Gauge NOTE: GENERIC EXPLODED VIEW. CONSULT BOTTOM MANIFOLD DIAGRAM FOR HOSE BARB AND PLUG PLACEMENT. Extend BOM ID Item No Description to Knives 66000151 GDI200A W/DUAL IMPELLICONE MANIFOLD, AT60, 19R30 AAM2635 IMPELLICONE 13 PORT, W/ MOUNT &...
  • Page 125 Meter Assembly GDI200A W/Dual Impellicone Manifold, (55000172) 23 Row 30 AT6020 Extend to Gauge NOTE: GENERIC EXPLODED VIEW. CONSULT BOTTOM MANIFOLD DIAGRAM FOR HOSE BARB AND PLUG PLACEMENT. Extend BOM ID Item No Description 66000172 GDI200A W/DUAL IMPELLICONE MANIFOLD, AT60, 23R30...
  • Page 126 Meter Assembly GDI200A With Dual Impellicone Manifold, AT6020 (55000181) 24 Row 30 Extend to Gauge NOTE: GENERIC EXPLODED VIEW. CONSULT BOTTOM MANIFOLD DIAGRAM FOR HOSE BARB AND PLUG PLACEMENT. Extend BOM ID Item No Description to Knives 66000181 GDI200A W/DUAL IMPELLICONE MANIFOLD, AT60, 24R30 AAM2635 IMPELLICONE 13 PORT, W/ MOUNT &...
  • Page 127 Meter Assembly GDI200A With Dual Impellicone Manifold, (66000112) 25 Row 30 AT6020 Extend to Gauge NOTE: GENERIC EXPLODED VIEW. CONSULT BOTTOM MANIFOLD DIAGRAM FOR HOSE BARB AND PLUG PLACEMENT. Extend BOM ID Item No Description to Knives 66000112 GDI200A W/DUAL IMPELLICONE MANIFOLD, AT60, 25R30 AAM2635 IMPELLICONE 13 PORT, W/ MOUNT &...
  • Page 128 Meter Assembly GDI200A With Dual Impellicone Manifold, (66000120) 36 Row 20 AT6020 Extend to Gauge BOM ID Qty Item No Description Extend 66000120 GDI200A W DUAL MANIFOLD, AT60, 36R20 IMPELLICONE to Knives AM2636 IMPELLICONE 18 PORT, W/ MOUNT & HARDWARE, 6 X 6...
  • Page 129 Meter Assembly GDI200A With Three Impellicone Manifold, AT6020 (66000123) 37 Row 15 BOM ID Item No Description 66000123 GDI200A W STD DIST TRI MANIFOLD, AT60, 37R15 AAM2635 IMPELLICONE 13 PORT, W/ MOUNT & HARDWARE, 6 X 6 AM7639 BRACKET, IMPELLICONE MOUNT BP3001 NUT, HEX, 3/8”-16, GRD 2, PLTD...
  • Page 130 Meter Assembly GDI200A With Three Impellicone Manifold, AT6020 (66000123) 37 Row 15 Extend to Knives...
  • Page 131 Meter Assembly GDI200A With Three Impellicone Manifold, (66000122) 47 Row 15 AT6020 BOM ID Item No Description 66000122 GDI200A W STD DIST TRI MANIFOLD, AT60, 47R15 AM2636 IMPELLICONE 18 PORT, W/ MOUNT & HARDWARE, 6 X 6 AM7639 BRACKET, IMPELLICONE MOUNT BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED...
  • Page 132 Meter Assembly GDI200A With Dual Impellicone Manifold, (66000122) 47 Row 15 AT6020 Extend to Knives...

  • Page 133: Maxpac Ar700 Parts And Assembly

    MaxPac AR700 6” Tube (AAM2135) AT6020 BOM ID Item No Description AM2262 BACKING PLATE, ROW MOUNT WITH COULTER MOUNT, AR700 AM2264 ASSEMBLY, AR700 MAXPAC ROW UNIT BP3213 GREASE ZERK AP2125 SHANK, 1-1/4” X 2” EDGE BENT AP2976 DECALS, AR 700-MAX PAC, 2 1/4” X 6’’...

  • Page 134: Maxpac Basket Mount Arm

    AAM2623 MaxPac Basket Mount Arm AT6020 BOM ID Item No Description AAM2623 AR700 MAXPAC BASKET MOUNT AM2271 BASKET MOUNT, MAXPAC AM2273 WELDMENT, NUT PLATE BP3042 NUT, HEX, 1/2”-13, GRADE 2, PLATED BP3043 WASHER, LOCK, 1/2”, PLATED BP3126 HEX CAP SCREW, 1/2”-13 X 1-1/2”, GRADE 5, PLATED...

  • Page 135: Coulter Extension Kit (9-7/8")

    Coulter Extension Kit (9-7/8”) AT6020 AAM2637 Coulter Bracket Extension Kit 9-7/8” (Used when residue managers are mounted on coulters.) BOM ID Item No Description AM2266 BRACKET, COULTER SHANK EXTENSION, (9-7/8”) BP3042 NUT, HEX, 1/2”-13, GRADE 2, PLATED BP3043 WASHER, LOCK, 1/2”, PLATED BP3229 BOLT, CARRIAGE, 1/2”-13 X 2-1/2”, GRADE 5, PLATED...

  • Page 136: Maxpac Assembly

    MaxPac AR700 Assembly AT6020 MaxPac MaxPac AR700 row Unit AM2261 (1) backing plate, AR700 row row unit AR 700 MaxPac unit assembly row unit b. AM 2264 (1) assembly, AR700 MaxPac row unit c. BP3034 (6) nut, hex, 3/4”-10, grade 2, plated d.
  • Page 137 MaxPac AR700 Assembly AT6020 Installation Insert (f) (AP2125) 1-1/4” x 2” AP2125 EdgeBent shank. EdgeBent shank Install two (g) (BP3141) 3/4” x 3” hex cap screws through row unit weldment and shank. Secure with (d) (BP3035) 3/4” lock washers and (c) (BP3034) 3/4”...

  • Page 138: Torsion Arm Basket Parts

    Torsion Arm Basket (Short Arms) AT6020 Bundle Number 70210641 70210641 TORSION ARM & 12-3/4” BASKET ASSEMBLY, SHORT BOM ID Item No Description AM2269 STRIPTILL BASKET MOUNT, SHORT (18-3/4”) AM7568 STRIPTILL TORSION SPRING ASSEMBLY AM7615 BASKET, STRIPTILL, 12-3/4” AP2144 HCFT205-16 BEARING BP3012 HEX CAP SCREW, 7/16”-14 X 1-1/2, GRADE 5, PLATED...

  • Page 139: Torsion Arm Assembly

    Torsion Arm Assembly AT6020 Attaching 1. Attach (2) (AM7568) StripTill torsion torsion spring assembly to rear of row mounting with spring (15) (BP3300) 5/8” x 2-1/2” x assembly 4” u-bolts, (9) (BP3039) 5/8” lock washers and (BP3038) 5/8” hex nuts.

  • Page 140: Torsion Arm Mounting Bracket Rigid Fertilizer Row

    Torsion Arm Mounting Brackets Rigid Fertilizer Rows AT6020 Rigid Mounting NOTE: Rigid row units require Bundle 70210641 with (1) AM 2269 shortened arms Bundle 70210592 (6” x 6”) 70210641 BOM ID Item No Description AM2272 BRACKET, RIGID/SCS, TORSION ARM BASKET MOUNT BP3034 NUT, HEX, 3/4”-10, GRADE 2, PLATED...

  • Page 141: Basket Mount Flat With Hardware

    Basket Mount Flat With Hardware AT6020 AAM2630 Basket Mount With/Hardware (6” x 6” tube) 1. AM7637 Basket mount plate, 6 x 6, StripTill 2. BP3034 Nut, hex, 3/4”-10, grade 2, plated 3. BP3035 Washer, lock, 3/4”, plated 4. BP3350 U-bolt, 3/4”-10 x 6” x 7-7/16”, plated Rear Mount 6”...

  • Page 142: Decals

    AP 2231 Decal, FEMA, 2-1/2” x 1-1/2” AP 2234 Decal, Danger stand clear falling wing AP 2469 Decal, Safety Chain AP 2483 Decal, Danger, falling from equipment AP 2914 Decal, Warning, high pressure fluid AP 2993 Decal, AT6020 Commercial Class Applicator...

  • Page 143: Striptill Residue Manager Parts

    StripTill Residue Manager AT6020 Bundle Number 70210646 BOM ID Item No Description AM2489 CLEVIS, SEALER SPRING, LOWER AM2490 TUBE, UPPER SPRING AM2491 BUSHING, SPRING COLLAR AM2492 TUBE, SPRING GUIDE AM7662 RESIDUE MANAGER BLADE, LEFT HAND AM7663 RESIDUE MANAGER BLADE, RIGHT HAND...

  • Page 144: Coulter Shank Extensions Brackets

    AM 7670 Blade Mounting Assembly & Coulter Shank Extension Brackets AT6020 BOM ID Item No Description AP2024 BEARING CONE, LM 11949 AP2425 PIN, COTTER, 1/8” X 1” AP2729 DUST CAP AP2742 GREASE SEAL, 10174VB AP2743 SPINDLE WASHERS AP2744 NUT, SPINDLE, 5/8”-18 BP3072 GREASE ZERK, 1/4”-28...

  • Page 145: Striptill Residue Manager Assembly

    Assembly (StripTill Residue Manager) AT6020 Mounting Place (10) (AM7671) 1 1 1 9 mounting arm upside down residue and install (9) (AM7670) manager blade mount on the raised blade weldment and insert two (14) assembly (BP3005) 3/8” x 1-1/2” from the top.
  • Page 146 StripTill Residue Manager AT6020 Mounting Attach (5) (AM7662) left-hand residue blade to hub on the raised blade mount with five (25) manager (BP3366) 1/4” x 3/4” hex flange blades bolts and (26) (BP3367) 1/4” hex flange nuts serrated. 1 1 1 5...
  • Page 147 StripTill Residue Manager AT6020 Mounting Attach (1) (AM2489) lower sealer spring clevis with spring (17) (BP3125) 1/2” x 1” hex clevis cap screw and (23) (BP3244) 1/2” hex lock nut. NOTE: hole is off centered. Position long edge toward the blades.
  • Page 148 StripTill Residue Manager AT6020 Attaching 12. Place (24) (BP3249) 1-7/8” OD x 1-1/4” ID machinery bushing bolt on on pivot weldment. blade arm mount 13. Slide (10) (AM7671) bolt on blade arm mount on pivot arm. 14. Place (24) (BP3249) 1-7/8”...
  • Page 149 StripTill Residue Manager AT6020 16. Insert (4) (AM2492) spring Mounting guide tube into (2) (AM2490) spring upper spring tube. Place (11) assembly (AP2997) spring over guide. 17. Place (3) (AM2491) spring collar bushing over guide. 18. Raise arm insert (20) (BP3129) 1/2”...
  • Page 150 StripTill Residue Manager AT6020 19. Rotate arm stop bracket Securing under residue manager arm arm stop and Insert (18) (BP3126) 1/2” x 1-1/2” hex cap screw from the hub side through coulter arm, arm stop bracket. Secure with (23) (BP3244) 1/2”...

  • Page 151: Light Kit/Slow Moving Vehicle

    Lighting Kit & Slow Moving Vehicle Kit AT6020 41000023 LIGHTING KIT, AT6020 BOM ID Item No Description AM3408 MOUNTING PLATE, LIGHT POST T AM3414 LIGHT BRACKET, REAR AM3415 LIGHT BRACKET, FRONT, LEFT HAND AM3416 TUBE, LIGHT BRACKET, (4’0”) AM3417 LIGHT BRACKET, FRONT, RIGHT HAND...
  • Page 152 Lighting Kit & Slow Moving Vehicle Kit AT6020...

  • Page 153: Light Kit/Slow Moving Vehicle 20" Row Spacing

    Lighting Kit & Slow Moving Vehicle Kit 20” Row Spacing AT6020 41000025 Lighting Kit, AT6020 20” Even Spacing BOM ID Item No Description AM3408 MOUNTING PLATE, LIGHT POST T AM3414 LIGHT BRACKET, REAR AM3415 LIGHT BRACKET, FRONT, LEFT HAND AM3416 TUBE, LIGHT BRACKET, (4’0”)
  • Page 154 Lighting Kit & SMV Kit 20” Row Spacing AT6020...

  • Page 155: Gdi Lift Kit

    Ground Drive Injection Pump Model GDI 200 Parts (Optional Lift Kit) AT6020 Lift Kits, 20200100,(20200101 less hoses), 6”x 6” Bar NOTE: Restrictor (19) must be installed between hydraulic hose and adapter (18). BOM ID Item No Description AM4569 BRACKET, UNIVERSAL MOUNT GDW HYDRAULIC LIFT...

  • Page 156: Hub And Spindle Assembly

    (AAM2788-1) Hub and Spindle Assembly AT6020 AAM2788-1, 758 HUB, 3” X 16” SPINDLE WITH LOCK ASSEMBLY BOM ID Item No Description AP2082 BEARING CONE, LM 501349 AP2122 PIN, COTTER, 7/32” X 1-3/4” AP2809 HUB CAP, 1609 AP2811 NUT, SPINDLE, 1”-14 AP2812 WASHER, SPINDLE, 2-1/8”...
  • Page 157 AAM2800 Hub and Spindle Gauge Wheel AT6020 AAM2800, 608 HUB, 2-3/4” X 16” SPINDLE, WITH TAPERED WHEEL NUTS BOM ID Item No Description AP2082 BEARING CONE, LM 501349 AP2122 PIN, COTTER, 7/32” X 1-3/4” AP2171 SPINDLE, 2-3/4” X 16” AP2805...
  • Page 158 AAM2800-1 Hub and Spindle AT6020 AM6198 DUALS, ROCKER, WITH SPINDLE LOOPS FOR 2-3/4” SPINDLE AAM2800-1, 608 HUB, 2-3/4” X 16” SPINDLE, WITH FLANGE LOCK NUT BOM ID Item No Description AP2082 BEARING CONE, LM 501349 AP2122 PIN, COTTER, 7/32” X 1-3/4”...
  • Page 159 AM24024 Hub and Spindle Assembly AT6020 AM24024 GAUGE WHEEL LEG, PIN ADJUST BOM ID Item No Description AP2023 BEARING CONE, LM 67048 AP2048 HUB CAP, 1513 AP2049 WHEEL BOLT, 1/2”-20 X 1” AP2066 GREASE SEAL, CR 16289 AP2078 BEARING CONE, JL 69349...
  • Page 160 Hub and Spindle Assembly, Swing Adjust Gauge Wheel (AAM2705) AT6020 AAM2705, 611 HUB, 1-3/4” X 14” SPINDLE ASSEMBLY BOM ID Item No Description AP2023 BEARING CONE, LM 67048 AP2048 HUB CAP, 1513 AP2049 WHEEL BOLT, 1/2”-20 X 1” AP2066 GREASE SEAL, CR 16289...
  • Page 161 AAM2707 Hub and Spindle Assembly 511 Hub, 1-3/4” x 13” Spindle AT6020 AAM2707, 511 HUB, 1-3/4” X 13” SPINDLE ASSEMBLY BOM ID Item No Description AP2023 BEARING CONE, LM 67048 AP2024 BEARING CONE, LM 11949 AP2029 PIN, COTTER, 5/32 X 1-1/2”...

  • Page 162: Hydraulic Repair Kit

    Hydraulic Repair Kits AT6020 MFG # TMC # Bore/Stroke Repair Kit Clevis Butt Gland PMS-AM-2546 4-1/2” X 12” PMCK-AM-2546 100000326 142000004 082000092 DP 4487 DP 4469 DP 4115 DP 4219 DP 4278 PMS-AM-2564 3-1/2” X 12” PMCK-AM-2564 100000423 41700023 081700269...

  • Page 163: Tie-Rod Cylinder Disassembly-Assembly Procedure

    Tie-rod Cylinder Disassembly - Assembly Procedure AT6020 With cylinder removed from machine, clean, drained of oil and fully retracted, proceed as follows: Disassembly: 1. Secure cylinder in vice or other method to prevent rotation. With the immediate area clean of dirt so parts can be laid out.

  • Page 164: Torque Specifications

    Torque Specifications AT6020 SAE FASTENER TORQUE CHART STANDARD T NOTE: Use these torque’s unless special torque’s are specified. Values are for UNC and UNF thread fasteners, plated or NOTE: Use these torque's, unless special torque's are specified. Values are for UNC and UNF thread fasteners, plated or HYDRAULIC TUB un-plated, as received from supplier.

  • Page 165: Specifications

    AAM 2800-1..............Torque 140 to 170 ft. lbs. AAM 2800................. Torque 140 to 170 ft. lbs. Hitches, Standard.............. Cat IV/V Pintle and Clevis Tractor Hitches Emergency Water Tank/Toolbox 9000 lb./ Parking Jack Transport Chain 60,000 lbs.) Lighting Kit 5 Year Frame Warranty AT6020 Wing Flex...
  • Page 166 Notes AT6020...

  • Page 167: Assembly

    Assembly AT6020 Task Procedures Illustrations Positioning Place (AM6172) main frame main frame on sturdy stands, about 36” on stands high on hard level surface. NOTE: Position primary wings Left-hand (AM6187) left-hand and AM6188) right-hand) on right-hand main frame with forklift.

  • Page 168: Secondary Wings

    Secondary Wing Assembly AT6020 Task Procedures Illustrations Mounting Position (a) (AM6168) left-hand secondary wing 60’ in primary secondary wing hinge weldments. wings Insert (b) (BM3816) 1-1/4” x 9-13/16” OAL pins into primary. NOTE: hinge weldments. Left-hand Secure pins with (c) (BP3096) 3/8”...
  • Page 169 Dual Wheel Center Lift Assembly AT6020 Task Procedures Illustrations Mounting Mount (a) (AM6173) left-hand wheel leg duals w/pivot and dual wheel (AM 6174) right-hand wheel leg legs duals w/pivot and to main frame. NOTE: Left-hand Insert (c) (BM3664) 1-3/4” x 16-3/4”...

  • Page 170: Dual Wheel Lift

    Dual Wheel Center Lift Assembly AT6020 Task Procedures Illustrations Place dual hubs assembly Mounting into wheel leg weldment. dual hub and spindle assembly • Pre-assembly dual rocker before mounting. AM6198, Duals, rocker, Insert (i) (BM3640) 2” x 12-5/8” w/spindle loops for 2-3/4”...
  • Page 171 Dual Wheel Center Lift Assembly AT6020 Task Procedures Illustrations Mounting Before mounting the tires, the tread will run to the rear tires with valve stem on the hub side. (30” and 15”) Tire: NOTE: (l) (AAM2914) 12.4 x 38 14 ply...
  • Page 172 Dual Wheel Center Lift Assembly AT6020 Task Procedures Illustrations Mounting 11. Position both tire next to hub. tires NOTE: Left-hand right-hand as viewed from the rear 12. Raise wheel leg assembly and maneuver tires on studs. 13. Place (n)(AM4597) cap strap for AAM 2800-1...

  • Page 173: Primary Wing Gauge Wheels

    Primary Wing Gauge Wheel Assembly AT6020 Task Procedures Illustrations Left-hand side from the rear Tractor Side (AM6164) right-hand wheel leg with 2-3/4” spindle Mounting Mount (a) (AM6163) left- primary hand wheel leg with 2-3/4” spindle and (b) (AM6164) gauge right-hand wheel leg with wheels 2-3/4”...
  • Page 174 Primary Wing Gauge Wheel Assembly AT6020 Task Procedures Illustrations Mounting Remove paint from primary (AAM2800-1 608 hub 2-3/4” 4 x 16 spindle end. Place anti-seize wing on spindle before inserting in gauge wheel leg loop. wheels Turn set screws out before NOTE: inserting spindle.

  • Page 175: Valve Stem

    Primary Wing Gauge Wheel Assembly AT6020 Task Procedures Illustrations Mounting 11. Lift tire into position from the primary top. (L1) AAM2923, wheel, 295/75 gauge R22.5, 22.5 x 8.25 x 8 Gray wheels recap (Pictured) NOTE: (L2) AAM2924 wheel, 385/65 R22.5 Left-hand x 11.75 x 8 Gray recap...
  • Page 176 Primary Wing Gauge Wheel Assembly AT6020 Task Procedures Illustrations Mounting 15. Tighten 1” hex nuts. primary gauge wheels NOTE: Left-hand and right- hand as viewed from the rear 16. Attach (DP4486) 4” x 12” rephase cylinder to wheel leg with cylinder pin.

  • Page 177: Center Section Wheel Lift Linkage

    Center Section Wheel Lift Linkage Assembly AT6020 Task Procedures Illustrations Mounting Attach (a) (AM6202) bolt-on Rear cylinder lug with (b) (BP 3291) wheel lift 1” x 4”, grade 5 hex cap linkage screw, (c) (BP3020) 1” lock washer and (d) (BP3019) 1”...

  • Page 178: Right-Hand Side

    Center Section Wheel Lift Linkage Assembly AT6020 Task Procedures Illustrations Cylinder should be drained of Mounting oil before installation. wheel lift linkage Attach (DP4487) 4-1/2” x 12” rephase cylinder, port side down to wheel leg weldment NOTE: with cylinder pin.

  • Page 179: Tongue Mounting

    Tongue Mounting AT6020 Task Procedures Illustrations Raise the tongue (a) (AM5158) Mounting into position on the main Cat. IV frame and insert (b) (BM3535) tongue 2” x 6-1/8” pins with hole into weldment. Insert (c) (BP3136) 5/8” x 4” NOTE:...

  • Page 180: Tongue Linkage

    Tongue Linkage Assembly AT6020 Task Procedures Illustrations Center and mount Mounting (AM4511) turnbuckle Turnbuckle support mount on support tongue frame with mount (b) (BP3347) 5/8” x 4”W x 5-5/8” L u-bolt, (c) (BP3039) 5/8” lock washers and NOTE: (d) ( BP3035) 5/8”...
  • Page 181 Tongue Linkage Assembly AT6020 Task Procedures Illustrations Mounting Loosen turnbuckle nut to lower the tongue cylinder tongue linkage into position. cylinder linkage NOTE: Left-hand right-hand as viewed from the rear (DP4483) 3-1/4” x 12” Rephasing Cylinder Expandable Model (DP4484) 3-1/2” x 12”...
  • Page 182 Tongue Linkage Assembly AT6020 Task Procedures Illustrations Mount (DP4484) 3-1/2” Mounting X 12” rephase cylinder to tongue main frame weldment with cylinder cylinder pin. (Ports up) linkage cylinder Loosen plugs and extend NOTE: rod to cylinder arm. Left-hand right-hand as viewed...

  • Page 183: Bolt-On Cylinder Lug

    Bolt-On Cylinder Lug AT6020 Task Procedures Illustrations Mount (a) (AM4563) bolt-on Mounting 5” cylinder lug between cylinder lug stops with (b) (BP3350) 3/4” x 6” x 7-7/16” u-bolts, (c) (BP3035) 3/4” lock washers and (d) (BP3034) 3/4” hex nuts. NOTE:...

  • Page 184: Primary Wing Cable Release

    Primary Wing Cable Release AT6020 Task Procedures Illustrations Attach (a) (AM4529) primary Mounting wing safety latch trip on primary tractor side hinge weldment wing cable with (b) (BP3115) 3/8” release x 2” hex cap screw and (c) (BP3003) 3/8” hex lock nut.

  • Page 185: Hitch And Safety Chain

    Hitch and Safety Chain Mounting AT6020 Task Procedures Illustrations Mounting Attach (a) (AP4391) 60,000# 5/8” safety chain with safety (BM3610) 1-3/4” x 6-3/16” pin. chain Secure with (c) (BP3519) 3/8” x 2-1/2” roll pin. Mount (d) (AP3127) Perfect hitch, CAT IV-V, Black with three (e) (BP3448) 1”...

  • Page 186: Jack

    Jack Mounting and Assembly AT6020 Task Procedures Illustrations Mounting Position (a) (AM2518) jack 9TW-25DL Top wing DL jack 58-1/2” on tongue 58-1/2” from hitch end of tongue weldment. Insert (b) (BP3347) 5/8” x 4”W x 5-5/8”L u-bolts. Secure with (c) (BP3039) 5/8”...

  • Page 187: Hose Holder And Hose Tender

    Hose Holder and Hose Tender Mounting AT6020 Task Procedures Illustrations Mounting Position (f) (AP2871) Place (a) (AM4528) hose poly hose retainer between hose holder brackets holder brackets and insert 24-3/4” from hitch end of and hose (b) (BP3118) 3/8” x 5”...

  • Page 188: Turnbuckle Wrench 3-1/2

    Turnbuckle Wrench Holder AT6020 Task Procedures Illustrations Mounting turnbuckle wrench holder Mount (a) (AP2197) wrench storage bracket on tongue with (BP3045) 3/8”-16 x 6”W x 5”L u-bolt, (c) (BP3002) 3/8” lock washers and (BP3001) 3/8” hex nuts. Insert (e) (AM4759) Turnbuckle wrench 3-1/2”...

  • Page 189: Hitch Storage

    Hitch Storage Assembly AT6020 Task Procedures Illustrations Mounting hitch holder Mount (a) (AM2145) hitch storage bracket on tongue with (BP3045) 3/8”-16 x 6”W x 5”L u-bolt, (c) (BP3002) 3/8” lock washers and (BP3001) 3/8” hex nuts. Place (e) (AM2144) fabricated truck hitch on storage bracket.

  • Page 190: Manual Holder

    Manual Holder Assembly AT6020 Task Procedures Illustrations Mounting manual holder Mount (a) (AP4254) top of manual holder (b) (AM7640) mounting bracket with (c) (BP3006) 3/8” x 1” hex cap screw. Secure (d) (BP3002) 3/8” lock washer and (BP3001) 3/8” hex nut.

  • Page 191: Stagger Brackets

    Stagger Bracket Mounting AT6020 Task Procedures Illustrations Attach (a) (AM4545) 22” x 20” Mounting 6 x 6 mounting offset stagger stagger bracket with (b) (BP3350) brackets 3/4” x 6”W x 7-1/16” L u-bolt, (c) (BP3035) 3/4” lock washers NOTE: (d) (BP3034) 3/4”...

  • Page 192: Primary Wing Linkage

    Primary Wing Linkage AT6020 Task Procedures Illustrations Place (a) (BP3249) 1-7/8” OD Mounting x 1-1/4” ID machinery bush- primary ing and (b) (AP2711) 1-1/4” wing snap ring on (c) (BM3544) linkage 1-1/4” x 9” double grooved pin. NOTE: Insert (d) (AM4524)

  • Page 193: Secondary Wing Linkage

    Hydraulic Gauge Wheel Secondary Wing Linkage AT6020 Task Procedures Illustrations Insert (a) (BM3639) 1-1/4” x Mounting 2-5/8” pin into (b) (AM6170) secondary 180 degree fold rocker and (AM6171) 11-3/4” rocker wing wing linkage fold linkage . NOTE: (a) (BM3639) 1-1/4” x 2-5/8”...
  • Page 194 Third Wing Linkage AT6020 Task Procedures Illustrations Attach (a) (AM6166) third wing Mounting left-hand or (b) (AM6167) third third wing right-hand to secondary wing linkage wing with (c) (BM3461) 1-3/4” x 19-3/4” OAL with 21/32”, hole Insert pin through third wing hinge weldment.

  • Page 195: Third Wing Linkage

    Third Wing Latch and Wing Stop AT6020 Task Procedures Illustrations Position (a) (AM6156) right- Right-hand Mounting hand wing latch and (AM6155) left-hand wing latch third 64-1/4” from hinge weldment wing latch of secondary wing hinge and wing to edge of wing latch.

  • Page 196: Secondary Wing Latch Standard Wing

    Secondary Wing Latch With Hydraulic Gauge Wheel AT6020 Task Procedures Illustrations 1. a. AM4566 2 Wing latch Installation pivot, secondary of secondary wing wing latch b. AM4567 2 Pipe spacer hydraulic c. AM4568 4 Secondary wing lock plate gauge wheel d.

  • Page 197: Hose Holder Placement 60

    Hose Holder Placement 60’ AT6020 Task Procedures Illustrations 16.5” 17” 14” 10” 54” 46” 25.5” 18” 17.75” Hose holder mounted to frame 32” 80”...

  • Page 198: Hydraulics 60' Assembly

    AT6020 60’ Hydraulics PKG000238 Package, Hydraulic, AT6020 Base, Up To 48’ AT6020 Task Procedures Illustrations Right-hand From The Rear...
  • Page 199 AT6020 60’ Hydraulics AT6020 60’ Hydraulics PKG000238 Package, Hydraulic, AT6020 Base, Up To 48’ AT6020 Task Procedures Illustrations BOM ID Qty Item No Description PKG00238 PACKAGE, HYD, AT6020 BASE, UPTO 48’ AM2090 BRACKET, DEPTH COLLAR & LOCKUP STORAGE AM6159 BRACKET, MOUNTING, FLOW DIVIDER VALVE AM6280 TRANSPORT CYLINDER LOCK, 1-3/4”...

  • Page 200: From The Rear

    AT6020 60’ Wing Cylinder Fittings AT6020 Task Procedures Illustrations Attach (31) (DP4590) flow Mounting divider to (AM6159) check wing valve mounting plate with cylinders (BP3006) 3/8” x 1” hex cap screws, and two NOTE: (BP3002) 3/8” lock washers. Left-hand Position flow divider assembly...
  • Page 201 AT6020 60’ Wing Cylinder Fittings AT6020 Task Procedures Illustrations Dual Left-hand from the rear secondary wing DP4579 DP4581 cylinders 4-1/2 x 20 Secondary wing NOTE: cylinder Left-hand right-hand as viewed from the 90 ports face rear DP4550 center DP4379 DP4580...
  • Page 202 AT6020 60’ Lift Cylinder Fittings AT6020 Task Procedures Illustrations DP4484 DP4143 DP4143 3-1/2 x 12 DP4487 4-1/2 x 12 DP4487 4-1/2 x 12 DP4143 DP4143 DP4143 DP4143 Center DP4487 Install (15) (DP4143) section 4-1/2 x 12 90 degree adapter, 10MJIC-...

  • Page 203: Depth Control Parts And Assembly

    Primary Wing Left-hand Area of Bundle 66000103 Depth Control Parts and Assembly Next Pages AT6020 DEPTH ADJUSTMENT Task Procedures Illustrations One complete revolution equals 1/2” of depth increase. 4.5” DEPTH DECAL Install (3D) (AP2584) depth control decal 4.5 in from handle.
  • Page 204 Primary Wing Left-hand Area of Bundle 66000103 Depth Control Parts AT6020 Task Procedures Illustrations...
  • Page 205 SPRING, 1.4” OD X 3” OAL, LHC 177P 02M BP3162 PIN, ROLL, 3/8” X 2”, PLATED AAM2929 ADJUSTMENT LINKAGE, AT6020 DEPTH CONTROL AM6267 LINKAGE BODY, AT6020 DEPTH CONTROL ADJUSTMENT AM6268 ROD END, 3/4” BALL JOINT, 3/4”-16LH X 5” AM6269 ROD END, 3/4” BALL JOINT, 3/4”-16RH X 5” AP2584...
  • Page 206 Primary Wing Left-hand Area of Bundle 66000103 Depth Control Assembly AT6020 Task Procedures Illustrations PREPARING ADJUSTMENT LINKAGE DEPTH CONTROL FOR ASSEMBLY Rotate each end of linkage out 3/4” or 12 revolutions. NOTE: This is a starting depth position. 74” CENTER...
  • Page 207 ADJUSTER BRACKET Position (42) (AM6270) depth control adjuster bracket 69-1/4” from the 4 x 6 tube on the AT6020 tongue. Secure with (102) (BP3330) 1/2” x 6” W x 5-1/8”L, u-bolts, (80) (BP3043) 1/2” lock washers and (79) (BP3042) 1/2”...
  • Page 208 Primary Wing Left-hand Area of Bundle 66000103 Depth Control Assembly AT6020 Task Procedures Illustrations ATTACHING VALVE DEPTH CONTROL ARM AND DEPTH CONTROL PLUNGER STOP ARM Insert (58) (BM3487) 1” x 7-3/4” pin into bracket. Place (40) (AM6264) depth control valve arm into bracket and insert (58) into the first side plate.
  • Page 209 Primary Wing Left-hand Area of Bundle 66000103 Depth Control Assembly AT6020 Task Procedures Illustrations ATTACHING REMOTE STROKE VALVE CONTROL Attach (16) (DP4377) remote stroke control valve to (40) depth control valve arm with (85) (BP3111) 5/16” x 2-1/2” hex cap screws, (93) (BP3158) 5/16”...
  • Page 210 Primary Wing Left-hand Area of Bundle 66000103 Depth Control Assembly AT6020 Task Procedures Illustrations ATTACHING DEPTH CONTROL GENERIC PHOTO LINKAGE STOP NOTE: Do not attach (41) (AM6266) depth control stop linkage to button stop bracket until the cylinders have been fully charged.
  • Page 211 Primary Wing Left-hand Area of Bundle 66000103 Depth Control Assembly AT6020 Task Procedures Illustrations ATTACHING HYDRAULIC HOSES Attach (Q) (DP5230) 1/2” x 42” hose to flow divider valve fitting. Extend to control valve 90 degree fitting. Attach (P) (DP5349) 1/2” x 240” hose to center control valve fitting and extend to tractor.

  • Page 212: Hydraulic Hoses 60' Assembly

    AT6020 60’ Hydraulics PKG00238, Hydraulic Package Base, Up To 48’ AT6020 Task Procedures Illustrations BOM ID Qty Item No Description DP4496 HOSE, HYD, 1/2 X 114, 10FJX-10FJX DP5001 HOSE, HYD, 1/2 X 168, 10FJX-10FJX DP5055 HOSE, HYD, 1/4 X 66, 6FJX-6FJX...
  • Page 213 AT6020 60’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Right-hand from the rear DP4484 3-1/2 x 12 DP4485 3-3/4 x 12 DP4485 3-3/4 x 12 Tractor Side Left-hand from the rear Lift wheel Attach (N) (DP5317) 1/2” x 240” (20’) 10FJX-8MSAE...

  • Page 214: Left-Hand And Right-Hand As Viewed From The Rear Note

    AT6020 60’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Right-hand from the rear DP4485 3-3/4 x 12 Left-hand from the rear DP4486 DP4484 4 x 12 DP4487 3-1/2 x 12 4-1/2 x 12 DP4487 4-1/2 x 12 DP4486 4 x 12...
  • Page 215 AT6020 60’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Tractor Side...
  • Page 216 AT6020 60’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Right-hand from the rear DP4398 5 x 36 DP4004 Left-hand from the rear DP4379 DP4398 5 x 36 DP4004 Tractor Side Attach bottom (O) (DP5318) Attach (L) (DP5312) 3/8” x 143”...
  • Page 217 AT6020 60’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Left-hand from the rear DP4398 5 x 36 DP4579 4-1/2 x 20 DP4492 3-1/2 x 20 Tractor Side Attach (F) (DP5306) 1/4” x Wing lift 296” (24’8”) 6FJX-6FJX hoses hoses 4004...
  • Page 218 AT6020 60’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Right-hand from the rear DP4492 3-1/2 x 20 DP4579 4-1/2 x 20 DP4398 5 x 36 Tractor Side Wing lift Attach (G) (DP5307) 1/4” x 272” (22’8”) 6FJX-6FJX hoses hoses 4004...
  • Page 219 AT6020 60’ AT6020 Task Procedures Illustrations...

  • Page 220: Hose Holder Placement 48

    Hose Holder Placement 48’ AT6020 Task Procedures Illustrations Hose holder mounted to frame 32” 80”...
  • Page 221 Hose Holder Placement 48’ AT6020 Task Procedures Illustrations 16.5” 17” 14” 10” 54” 46” 25.5” 18” 17.75”...

  • Page 222: Hydraulics 48' Assembly

    AT6020 48’ Hydraulics AT6020 Task Procedures Illustrations...
  • Page 223 AT6020 Task Procedures Illustrations BOM ID Qty Item No Description PKG00238 PACKAGE, HYD, AT6020 BASE, UPTO 48’ AM2090 BRACKET, DEPTH COLLAR & LOCKUP STORAGE AM6159 BRACKET, MOUNTING, FLOW DIVIDER VALVE AM6280 TRANSPORT CYLINDER LOCK, 1-3/4” & 2” ROD, 12” BM3520...

  • Page 224: Hydraulics Hoses 48' Assembly

    AT6020 48’ Wing Cylinder Fittings AT6020 Task Procedures Illustrations Attach (31) (DP4590) flow Mounting divider to (AM6159) check wing valve mounting plate with cylinders (BP3006) 3/8” x 1” hex cap screws, and two NOTE: (BP3002) 3/8” lock washers. Left-hand Position flow divider assembly...
  • Page 225 AT6020 48’ Wing Cylinder Fittings AT6020 Task Procedures Illustrations Dual Left-hand from the rear secondary wing DP4579 DP4581 cylinders 4-1/2 x 20 Secondary wing NOTE: cylinder Left-hand right-hand as viewed from the 90 ports face rear DP4550 center DP4379 DP4580...
  • Page 226 AT6020 48’ Lift Cylinder Fittings AT6020 Task Procedures Illustrations DP4484 DP4143 DP4143 3-1/2 x 12 DP4487 4-1/2 x 12 DP4487 4-1/2 x 12 DP4143 DP4143 DP4143 DP4143 Center DP4487 Install (15) (DP4143) section 4-1/2 x 12 90 degree adapter, 10MJIC-...
  • Page 227 AT6020 48’ Hydraulics AT6020 Task Procedures Illustrations BOM ID Qty Item No Description DP4496 HOSE, HYD, 1/2 X 114, 10FJX-10FJX DP5001 HOSE, HYD, 1/2 X 168, 10FJX-10FJX DP5055 HOSE, HYD, 1/4 X 66, 6FJX-6FJX DP5184 HOSE, HYD, 1/2 X 192, 10FJX-10FJX...
  • Page 228 AT6020 48’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Right-hand from the rear DP4484 3-1/2 x 12 DP4485 3-3/4 x 12 DP4485 3-3/4 x 12 Tractor Side Left-hand from the rear Lift wheel Attach (N) (DP5317) 1/2” x 240” (20’) 10FJX-8MSAE...
  • Page 229 AT6020 60’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Right-hand from the rear DP4485 3-3/4 x 12 Left-hand from the rear DP4486 DP4484 4 x 12 DP4487 3-1/2 x 12 4-1/2 x 12 DP4487 4 -1/2 x 12 DP4485 3-3/4 x 12...
  • Page 230 AT6020 48’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations...
  • Page 231 AT6020 48’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations DP4398 5 x 36 DP4398 5 x 36 Tractor Side Attach bottom (O) (DP5318) Install (H) (DP5308) 3/8” x 32” Wing lift 3/8” x 240” (20’), 6FJX- (2’-8”) from DP4379 fitting to...
  • Page 232 AT6020 48’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Left-hand from the rear DP4398 5 x 36 DP4579 4-1/2 x 20 Tractor Side Attach (C) (DP5055) 1/4” x 66” Wing lift (5’6”) hoses to tees on rear hoses (DP4579) cylinder. Extend...
  • Page 233 AT6020 48’ Hydraulic Hose Installation AT6020 Task Procedures Illustrations Right-hand from the rear DP4579 4-1/2 x 20 DP4579 4-1/2 x 20 DP4398 5 x 36 Wing lift Attach (C) (DP5055) 1/4” x 66” (5’6”) hoses to tees on rear hoses (DP4579) cylinder.
  • Page 234 Hydraulic Package For 60’ Toolbar Pictured (25 Row 30) AT6020 Task Procedures Illustrations Center Section Primary Wing...
  • Page 235 Hydraulic Package For 60’ Toolbar Pictured (25 Row 30) AT6020 Task Procedures Illustrations Secondary Wing Third Wing...

  • Page 236: Nurse Tank Hitch Single Pkg00234

    PKG00234 Nurse Tank Hitch Assembly Parts AT6020 Task Procedures Illustrations BOM ID Item No Description PKG00234 NURSE TANK HITCH ASSEMBLY, AT6020 AAM2931 ASSEMBLY, NURSE TANK HITCH, AUTO-LOK, W/O PIN AM6220 BRACKET, HITCH MOUNTING, AT6010 NURSE TANK AM6273 BRACKET, NURSE TANK HITCH MOUNTING, LOW AM6278 LINKAGE, NURSE TANK HITCH, 12-3/4”...
  • Page 237 PKG00234 Nurse Tank Hitch Assembly Parts AT6020 Task Procedures Illustrations Mounting Mount (3) (AM6220) nurse tank mounting brackets to bolt-on main frame with (13) (BP3140) nurse 3/4” x 2-1/2”, grade 5, hex cap tank hitch screws and (17) (BP3442) 3/4”...

  • Page 238: Nurse Tank Hitch Single Low Mounting Pkg00247

    Description PKG00247 NURSE TANK HITCH ASSEMBLY, AT6, LOW MOUNTING AAM2931 ASSEMBLY, NURSE TANK HITCH, AUTO-LOK, W/O PIN AM6234 BRACKET, LOW HITCH MOUNTING, AT6020 NURSE TANK AM6273 BRACKET, NURSE TANK HITCH MOUNTING, LOW AM6278 LINKAGE, NURSE TANK HITCH, 12-3/4” AP2711 SNAP RING, 1-1/4” EXTERNAL, HEAVY DUTY BM3544 PIN, 1-1/4”...
  • Page 239 PKG00247 Nurse Tank Hitch, Low Mounting Assembly AT6020 Task Procedures Illustrations Mounting Mount (3) (AM6234) nurse tank low mounting brackets bolt-on to main frame with (13) (BP 3140) nurse 3/4” x 2-1/2”, grade 5, hex cap tank hitch screws and (17) (BP3442) 3/4”...

  • Page 240: Supershooter Iii Add-On Parts 66000136 Single Assembly

    SuperShooter III Add-on Parts 66000136 Single Assembly AT6020 Task Procedures Illustrations BOM ID Qty Item No Description 66000136 SUPERSHOOTER III SINGLE ASSEMBLY, LESS DISTRIBUTION AAM3514 SUPERSHOOTER III/ SQUIBB COUPLER/ BODYGUARD III AM6277 SUPERSHOOTER RISER, AUTO-LOK HITCH BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED...
  • Page 241 SuperShooter III Add-on Parts 66000136 Single Assembly AT6020 Task Procedures Illustrations SuperShooter Attach (3) (AM6277) Super- Shooter riser to hitch with (10) single (BP3126) 1/2” x 1-1/2”, grade 5, assembly hex cap screws, Secure with (9) (BP3050) 1/2” flat washers, (8) (BP3043) 1/2”...
  • Page 242 SuperShooter III Add-on Parts 66000136 Single Assembly With GDI AT6020 Task Procedures Illustrations BOM ID Item No Description 66000136 SUPERSHOOTER III SINGLE ASSEMBLY, LESS DISTRIBUTION AM4553 HEAT EXCHANGER MOUNTING, AT5000 BP3038 NUT, HEX, 5/8”-11, GRADE 2 BP3039 WASHER, LOCK, 5/8”, PLATED...
  • Page 243 GDI 200 With Twin Pump Distribution (Rear Mount) Parts (Bundle 20200121) AT6020 Task Procedures Illustrations Generic Assembly BOM ID Item No Description PKG00234 NURSE TANK HITCH ASSEMBLY 66000136 SUPERSHOOTER III SINGLE ASSEMBLY 66000137 DUAL SUPERSHOOTER III ADD-ON ASSEMBLY, WITH HARDWARE & HOSE...

  • Page 244: Supershooter Iii Add-On Parts (66000137) Dual Assembly

    SuperShooter III Add-on Parts Dual Assembly 66000137 and 66000136 AT6020 Task Procedures Illustrations BOM ID Item No Description 66000136 SUPERSHOOTER III SINGLE ASSEMBLY, LESS DISTRIBUTION AAM3514 SUPERSHOOTER III/ SQUIBB COUPLER/ BODYGUARD III AM6277 SUPERSHOOTER RISER, AUTO-LOK HITCH BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED...
  • Page 245 SuperShooter III Add-on Parts 66000136 and 66000137 Dual Assembly AT6020 Task Procedures Illustrations SuperShooter dual assembly Mount (3) (AM6277) Super- Shooter riser to hitch with (10) (BP3126) 1/2” x 1-1/2” hex cap screws, (9) (BP3050) 1/2” flat washers, (8) (BP3043) 1/2”...
  • Page 246 SuperShooter III Add-on Parts 66000136 and 66000137 Dual Assembly AT6020 Task Procedures Illustrations SuperShooter dual assembly Mount (13G) (CM2313) 1-1/4” double coupler bracket to nurse tank linkage with (13E) (BP3005) 3/8” x 1-1/2”, grade 5, hex cap screws. Secure with (13D) (BP3002) 3/8”...
  • Page 247 SuperShooter III Add-on Parts 66000136 and 66000137 Dual Assembly AT6020 Task Procedures Illustrations SuperShooter dual assembly Install (16) (13K) (DP4397) 1-1/4” MP x 1-1/4” FP swivel in double coupler. Install (14) (13H) (CP2522) 1/1/4” NPT, hex nipple to swivel. Install (15) (13J) (CP2870) 1-1/4”...

  • Page 248: Swing Adjust Gauge Wheel

    Swing Adjust Gauge Wheel Assembly AT6020 Task Procedures Illustrations Swing 1. Position (a) (AM6186) 6” mounting bracket on the Adjust rear tube. gauge Secure with (b) (BP3350) wheel 3/4” x 6”W x 7-7/16” L u-bolt, (c) (BP3035) 3/4” lock washer...

  • Page 249: Coulter

    Coulter Assembly AT6020 Task Procedures Illustrations 1. Remove hex cap screws from Preparing AM2799 (a) (AM2799) coulter arm coulters with hub and knee casting assembly. mounting AP2701 2. Place (b) (AP2701) 20” (51 cm) fluted coulter blade on coulter assembly and replace hex cap screws.
  • Page 250 Coulter Mounting AT6020 Task Procedures Illustrations Mounting Insert two (BP3229) 1/2” x 2-1/2” carriage bolts in coulter shank assembly. assembly Generic Photo Install coulter assembly in bracket slot. Let coulter shank rest on top roll pin. Insert top carriage bolt. Push...

  • Page 251: Shank

    Shank Assembly and Mounting AT6020 Task Procedures Illustrations 1” x 2” flat 1. a. AM2148 1 Clamp, square hole 6” shank parts mounting, coil & flat b. AM2188 1 Backing plate c. AM2742 1 Bracket, universal coulter 6” d. AP2063 1 1” x 2” flat shank e.
  • Page 252 Shank Assembly and Mounting AT6020 Task Procedures Illustrations EdgeBent 1. Place (a) (BP3350) 3/4” x shank parts 7-7/16” u-bolts over tube. Raise (b) (AM4893) EdgeBent shank rigid mount bracket over the u-bolts. Secure with (c) (BP3035) 3/4” lock washers (d) (BP3034) 3/4”...

  • Page 253: Spring Cushion

    SCS 2100 Spring Cushion Assembly and Mounting AT6020 Task Procedures Illustrations SCS 2100 1. SCS 2100 flat spring cushion with coulter parts: flat spring cushion NOTE: No threads in shear area when attaching knives a. AM2189 1 Spring bundle base assembly b.
  • Page 254 SCS 2100 Spring Cushion Assembly and Mounting AT6020 Task Procedures Illustrations Installing Raise 1” x 2” shank into assembly over 3/4” bolt stub. 1” x 2” flat Replace 3/4” lock washer shank on and hex nut. Insert punch to SCS 2100...
  • Page 255 Light Kit Assembly and Mounting AT6020 Task Procedures Illustrations Single nurse Left-hand from the rear Right-hand from the rear tank hitch light kit placement Example: (24R30) NOTE: Left-hand right-hand as viewed from the rear Dual nurse Left-hand from the rear...
  • Page 256 Light Kit Assembly and Mounting AT6020 Task Procedures Illustrations AP3551 Mount (a) (AM3408) AM3414 Left-hand from the rear 1/4” x 4” x 11-3/16” light AP2551 post mounting plate with BP3736 (BP 3351) 3/8” X 6” x 7” u-bolts (c) (CP2660) 3/8”...
  • Page 257 Light Kit Assembly and Mounting AT6020 Task Procedures Illustrations Mount (f) (AM3414) rear BP3006 light bracket to frame side plate with (m) (BP3006) 3/8” AM3415 AP4415 AM3417 x 1” hex cap screws and (CP2660) 3/8” hex lock nuts, (Nylock). AP3551...
  • Page 258 Light Kit Assembly and Mounting AT6020 Task Procedures Illustrations Extend rear wiring harness from lights to right-hand side from the rear of frame. Attach (s) (AP2828) wiring harness extension to (g). Extend down the right-hand side of the tongue through hose holders.
  • Page 259 SMV Assembly and Mounting (Slow-Moving-Vehicle) AT6020 Task Procedures Illustrations 1. a. AM3420 (1) Bracket, SMV mounting AP2544 b. AP2543 (1) SMV mounting socket AP2543 c. CP2660 (2) Nut, hex lock, 3/8”, Nylock d. BP3045 (1) U-bolt, 3/8”-16 x 6W” x 5L”, plated AM3420 e.

  • Page 260: Light Kit & Slow Moving Vehicle 20" Row Spacing

    Lighting Kit 20” Row Spacing AT6020 Task Procedures Illustrations 41000025 Lighting Kit, AT6020 20” Even Spacing BOM ID Item No Description AM3408 MOUNTING PLATE, LIGHT POST T AM3414 LIGHT BRACKET, REAR AM3415 LIGHT BRACKET, FRONT, LEFT HAND AM3416 TUBE, LIGHT BRACKET, (4’0”)
  • Page 261 Lighting Kit 20” Row Spacing AT6020 Task Procedures Illustrations...
  • Page 262 Lighting Kit 20” Row Spacing AT6020 Task Procedures Illustrations...

  • Page 263: Safety Tank

    Safety Tank Assembly AT6020 Task Procedures Illustrations 1. Attach two (a) (AM2136) Mounting 9 gallon tank mounting safety tank brackets to (b) (AP2137) 9 gallon fresh water safety NOTE: tank with six (c) (BP3159) Mount 5/16” flat washers, (d) (BP3158) Safety Tank 5/16”...

  • Page 264: Depth Collars

    Depth Collar Mounting AT6020 Task Procedures Illustrations 1. Attach (a) (AM2090) depth Mounting collar & storage lockup depth bracket to rear main frame collar center section near the wheel brackets lift linkage. Secure with (BP3351) 3/8” x 6” x 7” u-bolt, (d) (BP3002) 3/8”...
  • Page 265 Safety AT6020 Task Procedures Illustrations Observe Safety Signs AP 2234-7-98 AP 2483-8-98 AP 2914 AP 222 8-90 AP 2469-7-98...

  • Page 266: Decals

    AP 2231 Decal, FEMA, 2-1/2” x 1-1/2” AP 2234 Decal, Danger stand clear falling wing AP 2469 Decal, Safety Chain AP 2483 Decal, Danger, falling from equipment AP 2914 Decal, Warning, high pressure fluid AP 2993 Decal, AT6020 Commercial Class Applicator...

  • Page 267: Hydraulic System Charging

    Hydraulic System Charging AT6020 Task Procedures Illustrations Connecting Connect the hydraulic hoses hydraulic to the tractor remote couplers. The 1/2” hoses supply oil to hoses to the wheel lift cylinders. The tractor 3/8” hoses supply oil to the CAUTION: CAUTION wing cylinders.

  • Page 268: Folding Toolbar

    Folding Toolbar AT6020 Task Procedures Illustrations Folding toolbar WARNING WARNING: Keep bystanders away during folding operation Fold slowly! Check hoses, fittings and row mountings for crash areas or leaks.

  • Page 269: Row Spacing Layout

    AT6020 Task Procedures Illustrations...
  • Page 270 Task Procedures Illustrations AT6020...
  • Page 271 AT6020 Task Procedures Illustrations...
  • Page 272 Task Procedures Illustrations AT6020...
  • Page 273 AT6020 Task Procedures Illustrations...
  • Page 274 Task Procedures Illustrations AT6020...
  • Page 275 AT6020 Task Procedures Illustrations...
  • Page 276 Notes Task Procedures Illustrations AT6020...
  • Page 277 AT6020 Task Procedures Illustrations...
  • Page 278 Task Procedures Illustrations AT6020...
  • Page 279 AT6020 Task Procedures Illustrations...
  • Page 280 Task Procedures Illustrations AT6020...
  • Page 281 AT6020 Task Procedures Illustrations...
  • Page 282 Lighting Kit & SMV Kit 20” Row Spacing Task Procedures Illustrations AT6020...

Table of Contents

Save PDF