1. Manuals
  2. Brands
  3. BLU-JET Manuals
  4. Farm Equipment
  5. GALAXY
  6. Assembly and operators manual

BLU-JET GALAXY Assembly And Operators Manual

3-point striptill implement with lift assist. 16 row 30
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY • GALAXY • GALAXY • GALAX
• GALAXY • GALAXY • GALAXY • GA
GALAXY
3-point StripTill
Implement With
Lift Assist
Assembly
and Operators
Manual
84001630, 16 Row 30
16 Row 30
Manual Number: 08000105
Rev. 11-16-16
TM
$20.00 Net

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GALAXY and is the answer not in the manual?

Questions and answers

Related Manuals for BLU-JET GALAXY

Summary of Contents for BLU-JET GALAXY

  • Page 1 GALAXY • GALAXY • GALAXY • GALAX • GALAXY • GALAXY • GALAXY • GA GALAXY GALAXY • GALAXY • GALAXY • GALAX • GALAXY • GALAXY • GALAXY • GA GALAXY • GALAXY • GALAXY • GALAX • GALAXY • GALAXY • GALAXY • GA GALAXY •...
  • Page 2 • Box 218 • Thurston, Nebraska, 68062-0218 Phone: 402-385-3041 • Fax: 402-385-3043 E-mail: box218@thurstonmfgco.com • Design specifications and features as described are subject to change without notice. BLU-JET is a registered trademark of Thurston Manufacturing Company, Thurston NE. /SIronWorks @SIronWorks...

  • Page 3: Table Of Contents

    GALAXY Table of Contents Manual Number: 08000105 16 Row 30” Rev. 11-16-16 Introduction......................2 Delivery........................ 4 To The Owner...................... Warranty....................... 6 Safety........................7 Operating Instructions................... 9 Operational Guide For Various Residue Situations..........14 Storage........................25 Specifications...................... 26 Parts 16 Row 30”...................... 27 16 Row 30” Row Spacing Layouts................ 31...

  • Page 4: Introduction

    Environmental, Safety, Quality, Production and Engineering keep our firm at the cutting edge of technology. We hope your BLU-JET equipment will give you years of service. ead this manual carefully. It will instruct you on how to operate and service your machine safely and correctly. Failure to do so could result in personal injury and/or equipment damage.
  • Page 5 Introduction General Information: The BLU-JET Galaxy unit is one of the most versatile machines you can own. With the Galaxy toolbar, you can till or place fertilizer (dry, liquid, anhydrous ammonia and dual placement) in one pass or separately, depending on your requirements.

  • Page 6: Delivery

    Dealer Checklist o The Dealer: Inspect the implement thoroughly after assembly to be certain it is functioning properly before delivering it to the customer. The following checklist is a reminder of points to cover. Check off each item as it is found satisfactory or after proper adjustment is made.

  • Page 7: To The Owner

    To The Owner hank you for your recent purchase of a new BLU-JET implement. The primary objective of Thurston Manufacturing Company is to build and provide you with a quality product. However, in the event that a problem does occur, it is imperative that your warranty registration is on file in order to accurately respond to your specific service circumstances.

  • Page 8: Warranty

    Warranty begins from date of delivery to the original purchaser and applies to all new BLU-JET products that have not been altered and are being used for the intended purpose. Negligence, abuse or modification of equipment manufactured by or purchased and resold by Thurston Manufacturing Company will void this warranty.

  • Page 9: Safety

    Safety RECOGNIZE SAFETY INFORMATION • This is the safety-alert symbol. When you see his symbol on your machine or in this manual, be alert to the potential for personal injury. Follow recommended precautions and safe operating practices. FOLLOW SAFETY INSTRUCTIONS •...
  • Page 10 Safety Observe Safety Signs AP 2483-8-98 AP 2914 AP 2988 Folding Frame AP 2234-7-98...

  • Page 11: Operating Instructions

    Operating Instructions Task Procedures Illustrations 3-Point Measure tractor linkages on adjustments pull arms to insure equal length for level operation as viewed across the rear of the tractor. Check tractor tire pressure for equal inflation. Be certain that the proper pins are used in either CAT.
  • Page 12 Operating Instructions Task Procedures Illustrations Lubrication wing hinges and wing linkages 6. Grease all zerks daily. Coulter 7. Grease coulter arm pivots daily. lubrication 8. Grease all coulter arm pivots The plug on the coulter hub can be removed. A zerk can be installed.
  • Page 13 Operating Instructions Task Procedures Illustrations Nurse tank 9. Nurse tank hitch can be hitch retracted and moved from side to side for easy hookup. NOTE: Hitch will automatically lock Periodically in the extended position. check Latch WARNING mechanism to ensure proper Pinch point To prevent Injury latching in the Keep hands clear...
  • Page 14 Operating Instructions Task Procedures Illustrations Lubricate Residue Managers daily Lubricate SealPro hubs daily Lubricate basket bearings daily...
  • Page 15 Operating Instructions Task Procedures Illustrations Emergency 10. Locate nine-gallon emergency water tank/toolbox. water tank Change water daily to provide operation fresh clean water to flush exposed skin or eyes. maintenance Drain water daily in cold temperatures to prevent freezing and bursting tank. 11.

  • Page 16: Operational Guide For Various Residue Situations

    Operational Guide For Various Residue Situations BLU-JET StripTill Implement Beans Coulter Blades • 3”-4” Deep (make sure hub is not running in the ground). (Soy or • If blades are new or being used for the first time in a season, Pinto) or if residue is hair pinning, sharpening each blade will assist in cutting during the first few acres of operation. After the first few acres, blades will self-sharpen. Residue Managers – Light pressure setting (particularly in light soils). Shank depth – Minimum 4” deep from ground level (optimum depth for fertilizer placement is 6”-8”). Sealer Blade Position – Front holes on the sealer arm. Sealer Blade Pitch – Determined by soil type and season in soybean residue. Sealer Blade Down Pressure – Determined by soil type and season in this residue. Basket Pressure – Determined by soil type and season in this residue.
  • Page 17 Operational Guide For Various Residue Situations BLU-JET StripTill Implement For best results follow these operating recommendations: Corn • Leaving standing stalks in the field when harvesting (about Grain under knee high) is preferable to shredding the residue. 250 bushel • Row units on the machine should be operated between last (in one year corn/bean year’s corn rows (split last year’s rows). rotation or Coulter Blades corn/corn/ • 3”-4” Deep (make sure hub is not running in the ground). bean rotation • If blades are new or being used for the first time in a season, if not Strip-...
  • Page 18 Operational Guide For Various Residue Situations BLU-JET StripTill Implement For best results follow these operating recommendations: Corn • Leave standing stalks do not shred the residue in the field when Grain over harvesting (about knee high). 250 bushel • Row units on the machine should be operated between last (in one year year’s corn rows (split last year’s rows). corn/bean Coulter Blades rotation) • 3”-4” Deep (make sure hub is not running in the ground). • If blades are new or being used for the first time in a season, or if residue is hair pinning, sharpening each blade will assist in cutting during the first few acres of operation. After the first few acres, blades will self-sharpen. Residue Managers – Heavy pressure setting. Shank depth – Minimum 4” deep from ground level (optimum depth for fertilizer placement is 6”-8”). Sealer Blade Position – Offset (left blade in rear holes and right blade in front holes).
  • Page 19 Operational Guide For Various Residue Situations BLU-JET StripTill Implement For best results follow these operating recommendations: Corn • Leave standing stalks do not shred the residue in the field when Grain under harvesting (about knee high). 250 bushel • Row units on the machine should be operated 7.5” to one side (in 2+ years of last year’s corn row (RTK guidance recommended). corn rotation) Coulter Blades • 3”-4” Deep (make sure hub is not running in the ground). • If blades are new or being used for the first time in a season, or if residue is hair pinning, sharpening each blade will assist in cutting during the first few acres of operation. After the first few acres, blades will self-sharpen. Residue Managers – Heavy pressure setting. Shank depth – Minimum 4” deep from ground level (optimum depth for fertilizer placement is 6”-8”). Sealer Blade Position – Rear holes on the sealer arm.
  • Page 20 Operational Guide For Various Residue Situations BLU-JET StripTill Implement For best results follow these operating recommendations: Corn • Leave standing stalks do not shred the residue in the field when Grain over harvesting (about knee high). 250 bushel • Row units on the machine should be operated 7.5” to one side (in 2+ years of last year’s corn row (RTK guidance recommended). corn rotation) Coulter Blades • 3”-4” Deep (make sure hub is not running in the ground). • If blades are new or being used for the first time in a season, or if residue is hair pinning, sharpening each blade will assist in cutting during the first few acres of operation. After the first few acres, blades will self-sharpen. Residue Managers – Heavy pressure setting. Shank depth – Minimum 4” deep from ground level (optimum depth for fertilizer placement is 6”-8”). Sealer Blade Position – Offset (left blade in rear holes and right blade in front holes).
  • Page 21 Operational Guide For Various Residue Situations BLU-JET StripTill Implement For best results follow these operating recommendations: Corn • Row units on the machine should be operated at least 7.5” off of Silage any corn row where root ball masses remain mostly intact. Coulter Blades • 3”-4” Deep (make sure hub is not running in the ground). • If blades are new or being used for the first time in a season, or if residue is hair pinning, sharpening each blade will assist in cutting during the first few acres of operation. After the first few acres, blades will self-sharpen. Residue Managers – Light pressure setting (particularly in light soils) Shank depth – Minimum 4” deep from ground level (optimum depth for fertilizer placement is 6”-8”). Sealer Blade Position – Front holes on the sealer arm. Sealer Blade Pitch – Determined by soil type and season in this residue Sealer Blade Down Pressure – Determined by soil type and season in this residue.
  • Page 22 Operational Guide For Various Residue Situations BLU-JET StripTill Implement Cover Coulter Blades • 3”-4” Deep (make sure hub is not running in the ground). Crop • If blades are new or being used for the first time in a season, Live or or if residue is hair pinning, sharpening each blade will assist Residue in cutting during the first few acres of operation. After the first few acres, blades will self-sharpen. Residue Managers – Heavy pressure setting. Shank depth – Minimum 4” deep from ground level (optimum depth for fertilizer placement is 6”-8”). Sealer Blade Position – Rear holes on the sealer arm. Sealer Blade Pitch – Blades should be even in pitch and backs of the blades should be at least 8” apart. Sealer Blade Down Pressure – Down Pressure Kit recommended in this residue situation. Basket Pressure – Determined by soil type and season in this residue.
  • Page 23 Operational Guide For Various Residue Situations BLU-JET StripTill Implement Sugar Coulter Blades • 3”-4” Deep (make sure hub is not running in the ground). Beets • If blades are new or being used for the first time in a season, or if residue is hair pinning, sharpening each blade will assist in cutting during the first few acres of operation. After the first few acres, blades will self-sharpen. Residue Managers – Light pressure setting (particularly in light soils). Shank depth – Minimum 4” deep from ground level (optimum depth for fertilizer placement is 6”-8”). Sealer Blade Position – Front holes on the sealer arm. Sealer Blade Pitch – Determined by soil type and season in this residue. Sealer Blade Down Pressure – Determined by soil type and season in this residue. Basket Pressure – Determined by soil type and season in this residue. Right-hand Front holes Light Pressure...
  • Page 24 Operational Guide For Various Residue Situations BLU-JET StripTill Implement Coulter Blades Wheat & • 3”-4” Deep (make sure hub is not running in the ground). Other • If blades are new or being used for the first time in a season, Small or if residue is hair pinning, sharpening each blade will assist Grain in cutting during the first few acres of operation. After the first few acres, blades will self-sharpen. Residue Managers – Heavy pressure setting. Shank depth – Minimum 4” deep from ground level (optimum depth for fertilizer placement is 6”-8”). Sealer Blade Position – Rear holes on the sealer arm. Sealer Blade Pitch – Blades should be even in pitch and backs of the blades should be at least 8” apart. Sealer Blade Down Pressure – Down Pressure Kit recommended in this residue situation. Basket Pressure – Determined by soil type and season in this residue.
  • Page 25 Setting the Implement for field operation: BLU-JET StripTill Implement 1. Run the implement in the field for approximately 100 feet (making sure the tractor reaches the speed at which you wish to operate the machine). Stop while leaving the shanks in the ground. 2. Check for your desired shank depth on a middle row and on each wing. Shank depth should be at least 4” from ground level (6”-8” is optimum fertilizer placement depth for corn in most areas). Adjust the mainframe and wing wheels accordingly and repeat steps 1&2 until desired depth across the machine is achieved. 3. Ensure the frame is level from front to back when the shanks are in the ground at the depth you have chosen. 4. Walk to the back of the machine. Below: are Items to look for. a. Check for uniformity on the strips from row to row. Fall Operation (In areas with a good freeze-thaw over the winter): 1. Top of the berm should be at a minimum height of 4” from ground level (expect it to mellow 2”-3” over the winter). 2. Berm should be 8”-10” wide.
  • Page 26 Setting the Implement for field operation: BLU-JET StripTill Implement b. Residue Managers There is a heavy and light spring pressure setting. Be sure that all Residue Managers are set on the same pressure setting. ii. Lift up on the Residue Managers to gauge pressure if settings are the same, but you suspect the spring pressure is different. iii. See recommended setting for your residue type and climate above. c. Sealer Blade Hanger Position Check to make sure all sealer blade hanger brackets are mounted on the sealer arms in the same positions (all front, all back, or all offset). ii. Check to make sure all sealer blade hanger brackets are mounted on the same width position (either all narrow or all wide). iii. See recommended setting for your residue type and climate above. d. Sealer Blade Angle Check to see that the blades on each row are set at a similar angle. ii. Check to see that the backs of the blades on each row are set approximately the same distance apart.

  • Page 27: Storage

    Storage Preparing A. Store the machine in a dry place. If the storage building has a dirt floor, lower the park stands and support the stand with a for storage board to prevent the stand from entering the ground. B. Scrape or brush off any dirt on the machine and remove all trash.

  • Page 28: Specifications

    Specifications Tractor Attachment 3 Point Main Frame 40’ 16 row 30” 5 Section, Folding Weight: (Less Row Units and Attachments) Weight: (With Nurse Tank Hitch) 16 Row 30” 14,730 lbs. 16 Row 30” 15,040 lbs. Rigid 1-1/4” x 2” EdgeBent Per Row: Weight: 65 lbs.
  • Page 29 80410214 Galaxy Bar, 16 Row 30” BOM ID Item No Description 80410214 GALAXY BAR, 16 ROW 30” 41000027 LIGHTING KIT, GALAXY, LIFT ASSIST 80410005 GALAXY FRAME, CENTER WITH GAUGE WHEELS 80410006 GALAXY, PRIMARY WINGS WITH GAUGE WHEELS 80410011 GALAXY, WINGS, 61” WITH 14-7/8” LINKAGES...

  • Page 30: Manual Holder

    80410253 Galaxy Bar, 16 Row 30”, Nurse Tank Hitch BOM ID Item No Description 80410253 GALAXY BAR, 16 ROW 30”, NURSE TANK HITCH 41000027 LIGHTING KIT, GALAXY, LIFT ASSIST 80410005 GALAXY FRAME, CENTER WITH GAUGE WHEELS 80410006 GALAXY, PRIMARY WINGS WITH GAUGE WHEELS 80410011 GALAXY, WINGS, 61”...
  • Page 31 84001630 Galaxy, 16 Row 30”, Rigid Shanks 84001630 Galaxy, 16 Row 30”, Rigid Shanks, Nurse Tank Hitch...
  • Page 32 84001630 Galaxy, 16 Row 30”, MaxPac 84001630 Galaxy, 16 Row 30, MaxPac, With Nurse Tank Hitch...
  • Page 33 84001630 Galaxy, 16 Row 30”, Rigid Shanks...
  • Page 34 840001630 Galaxy, 16 Row 30”, MaxPac Shanks...
  • Page 35 41000027 Lighting Kit, Galaxy, Lift Assist NOTE: Consult Row Spacing Pages for Proper Position of Light Kit Brackets...
  • Page 36 41000027 Lighting Kit, Galaxy, Lift Assist BOM ID Item No Description 41000027 LIGHTING KIT, GALAXY, LIFT ASSIST AM3408 MOUNTING PLATE, LIGHT POST T AM3409 TUBE, LIGHT BRACKET, (3’5-7/8”) AM3410 MOUNTING PLATE, LIGHT POST AM3414 LIGHT BRACKET, REAR AM3415 LIGHT BRACKET, FRONT, LEFT-HAND...
  • Page 37 80410005 Galaxy, Folding Center, Gauge Wheels 80410005 GALAXY, FOLDING CENTER, GAUGE WHEELS BOM ID Item No Description 80410005 GALAXY FRAME, CENTER WITH GAUGE WHEELS 80410001 GAUGE WHEEL, VERTICAL PIN ADJUST, ANGLED, 1 PAIR AAM2707 ASSEMBLY, 511 HUB, 1-3/4” X 13” SPINDLE AAM2781 WHEEL, 20.5 X 8.0-10, 10 X 6, WHITE...
  • Page 38 80410006, Galaxy, Primary Wings, 16 Row 30”...
  • Page 39 80410006, Galaxy, Primary Wings, 16 Row 30” BOM ID Item No Description 80410006 GALAXY, PRIMARY WINGS 16 ROW 30” 80410001 GAUGE WHEEL, VERTICAL PIN ADJUST, ANGLED, 1 PAIR AAM2707 ASSEMBLY, 511 HUB, & 1-3/4” X 13” SPINDLE AAM2781 WHEEL, 20.5 X 8.0-10, 10 X 6, WHITE...
  • Page 40 80410011 Galaxy, Secondary Wings, 61”...
  • Page 41 80410011, Galaxy, Secondary Wings, 61” BOM ID Item No Description 80410011 GALAXY, WINGS, 61” WITH 14-7/8” LINKAGES 80410001 GAUGE WHEEL, VERTICAL PIN ADJUST, ANGLED, 1 PAIR AAM2707 ASSEMBLY, HUB & SPINDLE, 511 HUB, 1-3/4” X 13” AAM2781 WHEEL, 20.5 X 8.0-10, 10 X 6, WHITE...
  • Page 42 80410043 Bolt-On 3-Point, With Lift Assist...
  • Page 43 80410043 Bolt-On 3-Point, With Lift Assist BOM ID Item No Description 80410043 3-POINT WITH LIFT ASSIST (ADJUSTABLE SPACING) AAM2714 ASSEMBLY, HUB & SPINDLE, STRADDLE HUB AAM2782 WHEEL, 295/75R22.5, 22.5 X 8.25 X 8, WHITE, RECAP AP2790 VALVE STEM, METAL AP2894 RIM, 22.5 X 8.25 X 8, -1-1/2”...
  • Page 44 PKG00239, Hydraulics, Lift Assist PKG00239, HYDRAULICS, LIFT ASSIST...
  • Page 45 PKG00239, Hydraulics, Lift Assist PKG00239, HYDRAULICS, LIFT ASSIST BOM ID Item No Description AM4721 TRANSPORT LOCK, 1-3/4” & 2” CYLINDER ROD AM4817 BRACKET, DEPTH COLLAR STORAGE AP2282-1 HOSE RETAINER, 4” X 6”, WITH PLASTIC CAPS BM3520 CLIP PIN, TRANSPORT LOCK BP3006 HEX CAP SCREW, 3/8”-16 X 1”, GRADE 5, PLATED BP3218...
  • Page 46 PKG00224 Galaxy Hydraulics, Primary Fold PKG00224...
  • Page 47 PKG00224, Galaxy Hydraulics BOM ID Item No Description PKG00224 PACKAGE, GALAXY HYDRAULICS, 16 ROW 30 AM4124 TRANSPORT VALVE MOUNT AM5455 BRACKET, MOUNTING, DOUBLE RELIEF VALVE AM5456 CYLINDER LUG, BOLT-ON, DOUBLE AP2284-1 HOSE RETAINER, 7” X 7”, WITH PLASTIC CAPS BP3006 HEX CAP SCREW, 3/8”-16 X 1”, GRADE 5, PLATED...
  • Page 48 PKG00224 Galaxy Hydraulics, Primary Fold TRANSPORT LOCK...
  • Page 49 PKG00224 Galaxy Hydraulics, Primary Fold RELIEF VALVE...
  • Page 50 PKG00224, Package, Galaxy Hydraulics, Secondary Fold PRIMARY WING PKG00224 SECONDARY WING...
  • Page 51 80410031 Assembly, Nurse Tank, Galaxy With Lift Assist 80410031, NURSE TANK HITCH, GALAXY WITH LIFT ASSIST Generic Drawing BOM ID Item No Description 80410031 ASSEMBLY, NURSE TANK HITCH, GALAXY WITH LIFT ASSIST AAM2426 SAFETY TANK, TOOLBOX ASSEMBLY, 6” X 4”...
  • Page 52 Auto-Lok Nurse Tank Hitch AAM2870 Parts AAM2870 HITCH ASSEMBLY, AUTO-LOK NURSE TANK BOM ID Item No Description AM4530 HITCH, NURSE TANK, MAIN FRAME AM4536 INSERT LATCH, NURSE TANK HITCH BM3551 PIN, 1” X 15-1/8” BP3215 MACHINERY BUSHING, 1-1/2” OD X 1” ID, 14 GAUGE, PLATED AP2407 SNAP RING, 1”...
  • Page 53 AAM2426 SAFETY TANK, TOOLBOX ASSEMBLY, 6 X 4 BOM ID Item No Description AAM2426 SAFETY TANK, TOOLBOX ASSEMBLY, 6” X 4” MOUNTS AP2215 DECAL, BLU-JET, 3” X 8” BP3045 U-BOLT, 3/8”-16 X 6”W X 5”L, PLATED PKG00040 PACKAGE, 9 GALLON SAFETY TANK AM2136 BRACKET, TANK MOUNT...
  • Page 54 AAM2641 Manual Holder, 7” X 7” Mounting Hardware AAM2641 MANUAL HOLDER, 7” X 7” MOUNTING HARDWARE BOM ID Item No Description AM7640 BRACKET, MOUNTING, MANUAL HOLDER AP4254 MANUAL HOLDER, BLACK BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED BP3006 HEX CAP SCREW, 3/8”-16 X 1”, GRADE 5, PLATED BP3335...
  • Page 55 CASTING, COULTER KNEE, MACHINED AM2796 SPRING CAP & GUIDE, HD COULTER AM2797 COULTER ARM, HD AP2216 DECAL, BLU-JET, SMALL, 1-1/2” X 4” AP2029 PIN, COTTER, 5/32” X 1-1/2” AP2704 NUT, SPINDLE, 3/4”-16 AP2705 WASHER, SPINDLE, 1-1/2” X 13/16” X .134”...
  • Page 56 Coulter Assembly 1. Remove hex cap screws from Preparing AP2799 (a) (AM2799) coulter arm coulters with hub and knee casting assembly. mounting AP2701 2. Place (b) (AP2701) 20” fluted coulter blade on coulter assembly and replace hex cap screws. 3. Install (c) (BP3205) 2-1/2”...
  • Page 57 AAM2821, Coulter, Flatback Centered Assembly, 7” X 7” AAM2821, COULTER FLATBACK CENTERED ASSEMBLY, 7” X 7” BOM ID Item No Description AM4425 BRACKET, FLATBACK, 7” X 7”, CENTERED BP3042 NUT, HEX, 1/2”-13, GRADE 2, PLATED BP3043 WASHER, LOCK, 1/2”, PLATED BP3229 BOLT, CARRIAGE, 1/2”-13 X 2-1/2”, GRADE 5, PLATED BP3356...
  • Page 58 AAM2707 Assembly, 511 Hub, 1.75” X 13” Spindle AAM2707 ASSEMBLY, 511 HUB, 1.75” X 13” SPINDLE BOM ID Item No Description AP2023 BEARING CONE, LM 67048 AP2024 BEARING CONE, LM 11949 AP2029 PIN, COTTER, 5/32” X 1-1/2” AP2049 WHEEL BOLT, 1/2”-20 X 1” AP2052 GREASE SEAL, CR 14974 AP2053...
  • Page 59 AAM2714 Assembly, Hub & Spindle, Straddle Hub BOM ID Item No Description AM4837 ASSEMBLY, WHEEL HUB AP2089 BEARING CUP, LM 104911 AP2810 WHEEL NUT, 5/8”-18 AP2814 BOLT, WHEEL STUD, 5/8”-18 X 2-1/4” AM4838 SPINDLE HUB SPACER, STRADDLE HUB AP2090 BEARING CONE, LM 104949 AP2651 SPINDLE AP2816...
  • Page 60 Left-hand right-hand as viewed from the rear. DANGER Secure frame to stands Folding Frame Position Galaxy main frame on sturdy stands, about 35” high on hard level surface. Clamp frame to stand to stabilize. Installing level wing stops AM5410 BP3199...
  • Page 61 Assembly (Primary Wing Mounting) Attaching Raise folding wing into position with a forklift.` folding wing BP3205 AM5454, Galaxy Primary Wing BP3135 BP3375 BM3485 Insert wing weldments into main frame hinge weldments. Secure wing with (a) (BM3485) 1-3/4” x 12-1/8” pin. Place (BP3205) 2-1/2”...
  • Page 62 Assembly (Primary Wing Cylinders) Installation cylinder lugs AM5456 BP3296 BP3058 CENTERING BLOCKS Place (a) (AM5456) bolt-on cylinder lug, on rear frame using the centering blocks. Secure with (b) (BP3058) u-bolt, 3/4”-10 X 7”W X 9”L, (c) (BP3296) hex lock nut 3/4”-10, Nylock.

  • Page 63: Wings

    2-1/2” OD X 1-3/4” ID machinery bushings on each side of wing hinge as pin is inserted. Secure pin with (c) (BP3135) 5/8” x 3-1/2”, grade 5, hex cap screws and (BP3375), 5/8” hex lock nuts. BP3205 AM5404, Galaxy 61” Wing BP3135 BP3375 BM3485...
  • Page 64 Assembly (Secondary Wing Linkages) Installation AM7587 of wing linkages BP3249 BP3096 AM7588 BM3486 BP3072 BP3215 BP3115 CP2660 CP2660 BM3487 Install (a) (BP3072) grease Place (d) (BP3215) 1-1/2” zerks in each wing linkage. OD x 1” ID, 14 Ga. machinery bushing and (k) (AP2407) 1”...
  • Page 65 Assembly (Vertical Pin Adjust Gauge Wheels, Angled) Vertical pin adjust gauge wheel angled NOTE: Consult row spacing pages for gauge wheel placement Tire pressure (AAM 2781) 20.5 x 8.0-10, 10 x 6 (32 psi. Max.) Consult row spacing pages for placement of gauge wheels.
  • Page 66 Assembly (Vertical Pin Adjust Gauge Wheels, Angled) Vertical pin Install (e) (BP3146) two 3/4” AM5419 BP3051 x 6” hex cap screws through adjust BP3035 mounting bracket with two BP3500 gauge (BP3035) 3/4” lock washers wheel and two (d) (BP3034) 3/4” hex nuts.
  • Page 67 Assembly (3-Point With Lift Assist) Mounting 3-Point with lift assist Installing pull pins and park stands to bolt-on semi- mounted hitch CAT IV Install (b) (BM3640) 2” x 12-5/8” Pull Pins pins in two point arms of Shown (AM5408) bolt-on semi-mounted hitch.
  • Page 68 Assembly (3-Point With Lift Assist) Mounting AM5437 AM5424 3-Point with lift BP3251 assist AM5416 AM5437 Part of Bundle: BP3446 80410258 (e) (AM5424) double offset, 19 x 18/ 38 x 18, 7 x 7, mounting bracket BP3251 Tractor Side Installing Insert (a) (BP3251) 1”...
  • Page 69 Assembly (3-Point With Lift Assist) Mounting BP3446 3-Point BP3200 BP3446 with lift assist Attaching lift assist frames Assembly Stand BP3251 Location AM5438 Assembly Stand Location Position (a) (AM5438) lift assist Insert (b) (BP3251) 1” x 10”, grade 5, hex hex cap screws frames on front lift assist braces.
  • Page 70 Assembly (3-Point With Lift Assist) Mounting 3-Point with lift assist NOTE: Left-hand right-hand as viewed from the BP3096 BP3249 rear. Attaching linkages AM5439 cylinders BM3711 CP2660 to lift assist frame bushings on each side of Insert (b) (BM3711) 1-1/4” x 12” linkage.
  • Page 71 Assembly (3-Point With Lift Assist) Mounting 3-Point with lift assist NOTE: BP3249 Left-hand BP3096 right-hand as viewed from the rear. Attaching BM3711 CP2660 linkages AM5439 cylinders to lift assist frame Insert (b) (BM3711) 1-1/4” x 12” bushings on each side of pin in lift assist frame linkage.
  • Page 72 Assembly (3-Point With Lift Assist) Mounting 3-Point AM5439 AM5447 with lift assist AM4541 BP3096 BM3711 Mounting lift assist caster bar AM5439 CP2660 BP3249 (BP3249) 1-7/8” OD x 1-1/4” ID Position (a) (AM5447) lift assist machinery bushings on each caster bar, near linkages. side of cylinder rod end.
  • Page 73 Assembly (3-Point With Lift Assist) Caster Wheel Mounts AM5447 NOTE: AM5453 Consult BP3290 row spacing pages for caster wheel AM5448 mount location AAM2714 AAM2782 CP2660 Mount b (AM5453) caster wheel mount, on a (AM5447) caster bar, with c (AM5448) mounting clamp. Secure with (BP3290) 1”-8 X 3”...
  • Page 74 Assembly (3-Point With Lift Assist) Mounting 3-Point with lift assist BP3144 Mounting wheels AM5444 BP3707 BP3296 Raise lift assist caster Secure pin and bushing assembly with forklift. Insert with (c) (BP3144) 3/4” x lift assist caster fork and wheel 5” hex cap screw and assembly into caster.
  • Page 75 Assembly (3-Point With Lift Assist) Mounting 3-Point with lift assist AP2282-1 Attach (a) (AP2282-1) 4” x 6” Attaching hose retainers to lift assist hose frame. retainers DP4143 BP3006 DP4590 DP4590 DP4392 DP4418 Mount (o) (DP4590) flow Install fittings in flow divider. divider with two (e) (BP3006) 3/8”...
  • Page 76 Assembly (3-Point With Lift Assist) Mounting 3-Point DP5067 with lift assist DP5011 Wheel lift Attach (b) (DP5011) 3/8” x Attach (a) (DP5067) 3/8” x 180” (15’) 10FJX-10FJX 174” (14’6”) 10FJX-10FJX hoses hydraulic hoses to hydraulic hoses to Butt of wheel lift cylinders. Extend of wheel lift cylinders.
  • Page 77 Assembly (80410031 Nurse Tank, Galaxy With Lift Assist) AM6235 AP2711 BM3544 BP3249 BM3547 BP3135 BP3375 AAM2870 BM3632 Mounting Install (a) (AM6235) nurse nurse tank tank hitch linkage, 13-1/2”, hitch in caster bar top weldment with (b) (BM3544) 1-1/4” x 9”...

  • Page 78: Assembly

    Assembly (41000027 Lighting Kit, Galaxy, Lift Assist) Mounting Lighting Kit, Galaxy, 66" 66" Lift Assist Bundle: 60" 60" 41000027 AM5414 AM5413 13"x18" 19"x18" Mounting On each side for the rear frame mount (a) (AM3408) brackets AM3408 light post mounting plate 66”...
  • Page 79 Assembly (41000027 Lighting Kit, Galaxy, Lift Assist) Mounting Attach (f) (AM3410) light post mounting plate to bottom light of tube with (e) (BP3736) 3/8” bracket BP3736 x 2”W x 3”L u-bolts and tubes (CP2660) 3/8” hex lock nuts. AM3410 Inserting...
  • Page 80 Assembly (41000027 Lighting Kit, Galaxy, Lift Assist) Mounting side mount bars Position (i) (AM3422) side mount bar light brackets on BP3736 tube end. Secure with (e) (BP3736) 3/8” x 2”W x 3”L u-bolts and (CP2660) 3/8” hex lock nuts. AM3422...
  • Page 81 Assembly (41000027 Lighting Kit, Galaxy, Lift Assist) Mounting AP3551 lights Insert (p) (AP3551) model 60 oval grommets into mounting. Insert (q) (AP3549) lamp into grommet. Insert (r) (AP4415) Amber lamp into outside grommets. AP4415 NOTE: AP3549 Left-hand right-hand as viewed from the rear.
  • Page 82 Assembly (41000027 Lighting Kit, Galaxy, Lift Assist) Mounting lights Attach (a) (AP2548) 2 x 9 Red reflectors below Red and Amber lights. Attach (b) (AP2551) 2 x 9 Red-Orange reflectors above Red and Amber lights. Red-Orange AP2551 AP2548 Attach (c) (AP2547)
  • Page 83 Assembly (41000027 Lighting Kit, Galaxy, Lift Assist) Mounting AM3420 Attach (a) (AM3420) mounting bracket with (BP3335) 3/8” x 7”W x 8”L u-bolt and (c) (CP2660) 3/8” hex lock nuts. CP2660 BP3335 Attach (d) (AP2543) mounting socket with hardware provided with AP2542 socket.
  • Page 84 Assembly (41000027 Lighting Kit, Galaxy, Lift Assist) Mounting Mount (a) (AM4575) dust cap BP3335 BP3233 AM4575 holder bracket to two point frame with (b) (BP3335) 3/8” x 7”W x 8”L u-bolt and (CP2660) hex lock nuts. Attach (d) (AP2829) electrical...
  • Page 85 Assembly (PKG00224, Package, Galaxy Hydraulics, Primary Fold, 4 X 24 Cylinders) BP3587 DP4418 DP6302 CP2660 DP4418 AM5455 DP4421 DP3993 BP3055 DP4392 BP3157 BP3588 BP3359 BP3335 CP2660 AM4124 Mounting Attach (b) (AM5455) relief Attach (k) (AM4124) transport hydraulic valve mounting bracket to...
  • Page 86 Assembly (PKG00224, Package, Galaxy Hydraulics, Primary Fold 4 X 24 Cylinders) DP4445 DP4394 DP4379 DP4248 DP4445 DP4394 DP4379 DP4394 Attaching Attach (a) (DP4248) 4 x 24 hydraulic cylinders to main cylinders frame cylinder lug and and fittings extend rod to wing linkage and secure.
  • Page 87 Assembly (PKG00224, Package, Galaxy Hydraulics, Primary Fold 4 X 24 Cylinders) Attaching flow divider and fittings BP3006 DP4301 DP4392 DP4418 DP4143 Attach (a) (DP4590) Flow Install (d) (DP4392) 8MSAE- Divider to left side front 10MJIC straight adapter and lift assist brace with two...
  • Page 88 Assembly (PKG00224, Package, Galaxy Hydraulics, Primary Fold 4 X 24 Cylinders) DP4002 DP5137 DP5214 FLOW DIVIDER DP5140 TRANS LOCK DP4248 4 x 24 DP5028 DP5054 DP4392 RELIEF DP5055 VALVE DP5029 AP2284 DP4383 DP5104 Attaching Install (i) (DP4002) 1/4” X 48”...
  • Page 89 Assembly (PKG00224, Package, Galaxy Hydraulics, Secondary Fold 4 X 24 Cylinders) DP4248 Mounting Attach 2 (a) (DP4248) 4 x 24 secondary hydraulic cylinders to primary wing cylinder lug and extend fold rod to secondary wing cylinders linkage and secure...
  • Page 90 Assembly (PKG00224, Package, Galaxy Hydraulics, Secondary Fold 4 X 24 Cylinders) DP4445 DP4394 Install (a) (DP4394) 8MSAE- Install 6MJIC adapter in each top fittings port of cylinders. Secondary Fold Install (b) (DP4445) Elbow 90 degree, 6MJIC-6FJX on all ports.
  • Page 91 Assembly (PKG00224, Package, Galaxy Hydraulics, Secondary Fold 4 X 24 Cylinders) DP5086 DP5285 DP5285 DP4004 DP5086 Attaching Attach (a) (DP5285) 1/4” x Attach (c) (DP5086) 1/4” x 132” Secondary 160” hydraulic hoses to rod end hoses to butt end of cylinders.
  • Page 92 Assembly ( PKG00224, Package, Galaxy Hydraulics, Secondary Fold 4 X 24 Cylinders DP4394 DP4383 DP5055 DP4004 Attaching Attach 2 (a) (DP5055) 1/4” x 66” hydraulic hoses to Secondary (DP4004) tee. wing hoses Attach 2 (c) (DP4394) adapter to (a). Install 2 (DP4383) coupler to (c).
  • Page 93 Assembly (PKG00224, Package, Galaxy Hydraulics) Connecting Connect the hydraulic hoses to the tractor remote couplers. hydraulic The 1/4” hoses supply oil to hoses NOTE: the secondary wing cylinders. One set of 3/8” hoses supply Mark hose pairs with paint oil to the primary fold cylin- or tape.
  • Page 94 Assembly (Offset Stagger Brackets) Center Section Offset brackets center AM7519 NOTE: Consult row spacing pages for offset bracket locations BP3035 BP3034 AM5413 BP3181 BP3058 BP3035 AM5414 BP3034 AAM2176, 13 x 18, 7 x 7 offset stagger bracket with u-bolts. Mount (a) (AM5414) 13 x 18 offset stagger bracket with...
  • Page 95 Assembly (Offset Stagger Brackets) Primary Wings Offset AM5413 brackets BP3034 Primary BP3035 wings BP3058 BP3436 NOTE: BP3251 Consult AM5420 AM5413 row spacing AM5416 pages for offset bracket AM5420 locations BP3035 BP3034 BP3035 BP3034 BP3058 BP3181 AM5414 AM7519 BP3035 BP3034 AAM2173, Brace, bolt-on frame AAM2176, 13 x 18, 7 x 7 offset support with hardware.

  • Page 96: Offset Stagger Brackets

    Assembly (Offset Stagger Brackets) Secondary Wings Offset brackets NOTE: Consult row spacing pages for AM5413 offset bracket AM7519 locations BP3058 BP3035 BP3034 BP3181 BP3035 BP3034 AM5414 AAM2176, 13 x 18, 7 x 7 offset AAM2175, 19 x 18, 7 x 7 offset stagger bracket with u-bolts.

  • Page 97: Coulters

    Coulter Assembly 1. Remove hex cap screws from Preparing AP2799 (a) (AM2799) coulter arm coulters with hub and knee casting assembly. mounting AP2701 2. Place (b) (AP2701) 20” fluted coulter blade on coulter assembly and replace hex cap screws. 3. Install (c) (BP3205) 2-1/2”...
  • Page 98 Assembly (Mounting Coulters) Task Procedures Illustrations Mounting Insert coulter shank assembly BP3042 into the mounting. coulters BP3043 Insert the (a) (BP3229) 1/2”- 13 x 2-1/2” carriage bolt into top hole of bracket. Push coulter shank assembly back into the bracket and insert the bottom carriage bolt.
  • Page 99 70210646 StripTill Residue Manager 70210646 STRIPTILL RESIDUE MANAGER, 1 ROW BOM ID Item No Description AM2489 CLEVIS, SEALER SPRING, LOWER AM2490 TUBE, UPPER SPRING AM2491 BUSHING, SPRING COLLAR AM2492 TUBE, SPRING GUIDE AM7662 RESIDUE MANAGER BLADE, LEFT HAND AM7663 RESIDUE MANAGER BLADE, RIGHT HAND AM7667 BRACKET, PIVOT ARM AM7669...
  • Page 100 AM7670 Blade Mounting Assembly AM7670 BLADE MOUNTING ASSEMBLY BOM ID Item No Description AP2024 BEARING CONE, LM 11949 AP2425 PIN, COTTER, 1/8” X 1” AP2729 DUST CAP AP2742 GREASE SEAL, 10174VB AP2743 SPINDLE WASHERS AP2744 NUT, SPINDLE, 5/8”-18 BP3072 GREASE ZERK, 1/4”-28 EM3710 WELDMENT, BLADE MOUNTING EM6659...
  • Page 101 Assembly (StripTill Residue Manager) Task Procedures Illustrations Mounting Place (10) (AM7671) 1 1 1 9 mounting arm upside down residue and install (9) (AM7670) manager blade mount on the raised blade weldment and insert two (14) assembly (BP3005) 3/8” x 1-1/2” from the top.
  • Page 102 Assembly (StripTill Residue Manager) Task Procedures Illustrations Mounting Attach (5) (AM7662) left-hand blade to hub on the raised residue blade mount with five (25) manager (BP3366) 1/4” x 3/4” hex flange blades bolts and (26) (BP3367) 1/4” hex flange nuts serrated. 1 1 1 5 1 1 1 5...
  • Page 103 StripTill Residue Manager Task Procedures Illustrations Mounting Attach (1) (AM2489) lower spring sealer spring clevis with (17) (BP3125) 1/2” x 1” hex clevis cap screw and (23) (BP3244) 1/2” hex lock nut. NOTE: hole is off centered. Position long edge toward the blades. 1 1 1 1 Tighten 1/2”...
  • Page 104 StripTill Residue Manager Attaching 12. Place (24) (BP3249) 1-7/8” OD x 1-1/4” ID machinery bushing bolt on on pivot weldment. blade arm mount 13. Slide (10) (AM7671) bolt on blade arm mount on pivot arm. 14. Place (24) (BP3249) 1-7/8” OD x 1-1/4”...
  • Page 105 StripTill Residue Manager 16. Insert (4) (AM2492) spring Mounting guide tube into (2) (AM2490) spring upper spring tube. Place (11) assembly (AP2997) spring over guide. 17. Place (3) (AM2491) spring collar bushing over guide. 18. Raise arm insert (20) (BP3129) 1/2”...
  • Page 106 StripTill Residue Manager 19. Rotate arm stop bracket Securing under residue manager arm arm stop and Insert (18) (BP3126) 1/2” x 1-1/2” hex cap screw from the hub side through coulter arm, arm stop bracket. Secure with (23) (BP3244) 1/2” hex lock nut.
  • Page 107 SealPro II (AAM2856) Disc Sealer EdgeBent Shank AAM2856 SEALPRO II, EDGEBENT SHANK, 1 ROW BOM ID Item No Description AM2481 ASSEMBLY, SEALER HANGER WITH BLADE MOUNTING AM2485 ASSEMBLY, SEALER MOUNTING BRACKET AM2484 BRACKET, SEALER MOUNTING BM3643 PIN, 1-1/4” X 12-1/2” OAL, SEALER SHAFT BP3003 NUT, HEX LOCK, 3/8”-16, GRADE 2, PLATED BP3096...
  • Page 108 Sealer Hanger With Blade Mounting AM2481 ASSEMBLY, SEALER HANGER WITH BLADE MOUNTING BOM ID Item No Description AM2482 HUB CAP RETAINER AP2216 DECAL, BLU-JET, SMALL, 1-1/2” X 4” AP2377 BEARING CONE, L44649 AP2380 HUB CAP AP2426 PIN, COTTER, 5/32” X 1-3/4” AP2811 NUT, SPINDLE, 1”-14...

  • Page 109: Blades

    Blades Coulter Blade Fluted Blade 20” AP2701 SealPro (Disc Sealer) Blade Options AM2479 AM2473 AP2728 17” Notched Blade 18” hoe wheel 17” wavy BOM ID Item No Description AP2701 COULTER BLADE 20” FLUTED AM2479-1 NOTCHED BLADE, 10GA X 17” DIA AM2473 WHEEL, HOE, 1/4”...
  • Page 110 SealPro II (AAM2857) Assembly, Optional Sealer Spring Add-on Kit 1 Row AAM2857 OPTIONAL SEALER SPRING ADD-ON KIT 1 ROW BOM ID Item No Description AM2488 CLEVIS, SEALER SPRING, UPPER AM2489 CLEVIS, SEALER SPRING, LOWER AM2490 TUBE, UPPER SPRING AM2491 BUSHING, SPRING COLLAR AM2492 TUBE, SPRING GUIDE AP2997W...
  • Page 111 SealPro II (AAM2857) Assembly, Optional Sealer Spring Add-on Kit 1 Row Mount (2) (AM2489) sealer Front Mounting spring clevis lower to arm Spring with clevis hole to the front. Install (11) (BP3126) 1/2” x Add-on Kit 1-1/2” grade 5 hex cap screw. Secure with (9) (BP3043) 1/2”...
  • Page 112 AAM2743 AR700 MaxPac, 7’’ Mount BOM ID Item No Description AM2261 BACKING PLATE, ROW MOUNT AM2264 ASSEMBLY, AR700 MAXPAC ROW UNIT BP3213 GREASE ZERK AP2125 SHANK, 1-1/4” X 2” EDGE BENT AP2976 DECALS, AR 700-MAX PAC, 2 1/4” X 6’’ BP3034 NUT, HEX, 3/4”-10, GRADE 2, PLATED BP3035...
  • Page 113 AAM2623 MaxPac Basket Mount Arm BOM ID Item No Description AAM2623 AR700 MAXPAC BASKET MOUNT AM2271 BASKET MOUNT, MAXPAC AM2273 WELDMENT, NUT PLATE BP3042 NUT, HEX, 1/2”-13, GRADE 2, PLATED BP3043 WASHER, LOCK, 1/2”, PLATED BP3126 HEX CAP SCREW, 1/2”-13 X 1-1/2”, GRADE 5, PLATED...
  • Page 114 MaxPac AR700 Assembly MaxPac MaxPac AR700 row Unit AM2261 AM2261 (1) backing plate, AR700 row row unit AR 700 MaxPac unit assembly row unit AM2264 (1) assembly, AR700 MaxPac row unit BP3034 (6) nut, hex, 3/4”-10, grade 2, plated BP3035 (6) washer, lock, AM2264 3/4”, plated...
  • Page 115 MaxPac AR700 Assembly Installation Insert (f) (AP2125) 1-1/4” x 2” AP2125 EdgeBent shank. EdgeBent shank Install two (g) (BP3141) 3/4” x 3” hex cap screws through row unit weldment and shank. Secure with (d) (BP3035) 3/4” lock washers and (c) (BP3034) 3/4”...
  • Page 116 AAM2137 Row Clamp, Rigid, EdgeBent, 7” Mounts AAM2137 ROW CLAMP, RIGID, EDGEBENT, 7” MOUNTS BOM ID Item No Description AM4891 BRACE, ANTI-ROTATION, EDGEBENT SHANK BRACKET AM4893 BRACKET, EDGEBENT SHANK, RIGID MOUNT, 6” & 7” TUBE AP2125 SHANK, 1-1/4” X 2” EDGE BENT AP2284-1 HOSE RETAINER, 7”...
  • Page 117 70210648 Rigid, Torsion Arm/Basket & Mounting 70210648 RIGID, TORSION ARM/BASKET & MOUNTING BOM ID Item No Description 70210648 RIGID, TORSION ARM/BASKET & MOUNTING 70210641 TORSION ARM & 12-3/4” BASKET ASSEMBLY AAM2719 BASKET MOUNT ARM WITH HARDWARE, 7” X 7” AM2272 BRACKET, RIGID/SCS, TORSION ARM BASKET MOUNT BP3034 NUT, HEX, 3/4”-10, GRADE 2, PLATED...
  • Page 118 AAM2137 Row Clamp, 1-1/4” Rigid, With Shank Without Coulter Mount 7” x 7” EdgeBent 1. Place (a) (BP3058) 3/4” x 7”W BP3058 rigid row 9”L u-bolts over tube. Raise (b) (AM4893) EdgeBent clamp shank rigid mount bracket over the u-bolts. Secure with (c) (BP3035) 3/4”...

  • Page 119: Rigid Shank Mount (Aam2137)

    Rigid Shank Mounting With Basket Mount Rigid shank 1. Attach (a) (AM2272) torsion arm basket mount rigid with with basket (b) (BP3578) 3/4” x 9-1/2”, mount grade 5 hex cap screws. Position (e) (AM4893) EdgeBent AM2272 shank rigid mount on (b). Secure with (c) (BP3035) 3/4”...
  • Page 120 70210641 Torsion Arm & 12-3/4” Basket Assembly Bundle Number 70210641 70210641 TORSION ARM & 12-3/4” BASKET ASSEMBLY BOM ID Item No Description AM2269 STRIP-TILL BASKET MOUNT, (18-3/4”) AM7568 STRIP-TILL TORSION SPRING ASSEMBLY AM7615 BASKET, STRIPTILL, 12-3/4” AP2144 HCFT205-16 BEARING BP3012 HEX CAP SCREW, 7/16”-14 X 1-1/2”, GRADE 5, PLATED BP3016 NUT, HEX, 7/16”-14, GRADE 2, PLATED...
  • Page 121 Torsion Arm Assembly Attaching 1. Attach (2) (AM7568) StripTill torsion torsion spring assembly to rear of row mounting with spring (15) (BP3300) 5/8” x 2-1/2” x assembly 4” u-bolts, (9) (BP3039) 5/8” lock washers and (BP3038) 5/8” hex nuts. Attaching 2.

  • Page 122: Manual Holder

    AAM2641 Manual Holder, 7” X 7” Mounting Hardware AAM2641 MANUAL HOLDER, 7” X 7” MOUNTING HARDWARE BOM ID Item No Description AM7640 BRACKET, MOUNTING, MANUAL HOLDER AP4254 MANUAL HOLDER, BLACK BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED BP3002 WASHER, LOCK, 3/8”, PLATED BP3006 HEX CAP SCREW, 3/8”-16 X 1”, GRADE 5, PLATED BP3335...

  • Page 123: Safety Tank

    AAM2425 Safety Tank, Toolbox Assembly 4” x 6” Task Procedures Illustrations 1. Mount (a) (AM2136) tank Safety tank BP3108 mounting 9 gallon bracket on Assembly the back of (b) (AP2137) gallon safety tank. Secure top and bottom of bracket AP2137 with (c) (BP3108) 5/16”-18 x 1”...

  • Page 124: Decals

    AAM2426 Safety Tank, Toolbox Assembly, 6” x 4” BOM ID Item No Description AAM2426 SAFETY TANK, TOOLBOX ASSEMBLY, 6” X 4” MOUNTS AP2215 DECAL, BLU-JET, 3” X 8” BP3045 U-BOLT, 3/8”-16 X 6”W X 5”L, PLATED PKG00040 PACKAGE, 9 GALLON SAFETY TANK AM2136 BRACKET, TANK MOUNT...
  • Page 125 Assembly (Decals) BLU-JET Decal AP2215 6-06 AP 2215 Actual Size 3” x 8” Color: Reflex Blue and Clear Coat On White FB5000 White Vinyl Qty. 3,000 AP 2231 AP 2483 AP 2914 AP 2988 AP 2234 AP 2556 Galaxy Fertilizer Injection applicator...

  • Page 126: Hydraulic Cylinders And Parts

    Hydraulic Cylinders And Parts MFG # Bore/ TMC # Stroke Repair Kit Clevis Butt Gland Piston SAE-34024 4” X 24” PMCK-SAE-34000 100000326 141900037 081900354 071900260 DP4248 DP4310 DP4115 DP4270 DP4326 DP4328 MFG # 4 Req 2 Req 4 Req TMC# Piston Rod Barrel Tie Rod...

  • Page 127: Tie-Rod Cylinder Disassembly - Assembly Procedure

    Tie-rod Cylinder Disassembly - Assembly Procedure With cylinder removed from machine, clean, drained of oil and fully retracted, proceed as follows: Disassembly: 1. Secure cylinder in vice or other method to prevent rotation. With the immediate area clean of dirt so parts can be laid out. 2.

  • Page 128: Torque Specifications

    Torque Specifications SAE FASTENER TORQUE CHART STANDARD T NOTE: Use these torque’s unless special torque’s are specified. Values are for UNC and UNF thread fasteners, plated or NOTE: Use these torque's, unless special torque's are specified. Values are for UNC and UNF thread fasteners, plated or HYDRAULIC TUB un-plated, as received from supplier.

Table of Contents