Brother TD4420DN User Manual page 80

5. Exit
Exits the Device Settings window and returns to the main window of the Printer Setting Tool.
6. Apply
Applies the settings to the printer. To save the specified settings in a command file, select the Save in
Command File command from the drop-down list.
The saved command file can be used with the mass storage mode to apply the settings to a printer.
7. Settings Tabs
Contains settings that may be specified or changed.
If appears in the tab, the settings cannot be changed. In addition, the settings in the tab are not
applied to the printer even if you click Apply. The settings in the tab are not saved or exported when you
use the Save in Command File or Export commands.
8. Printer
Specifies the printer you want to configure.
Menu Bar
File Menu Options
• Apply Settings to the Printer
Applies the settings to the printer.
• Check Setting
Displays the current settings.
• Save Settings in Command File
Saves the specified settings in a command file.
• Import
Imports an exported file.
• Export
Saves the current settings in a file.
• Exit
Exits the Device Settings window and returns to the main window of the Printer Setting Tool.
Maintenance Menu Options
You must have administrator privileges for the computer or the printer to display some items. Check if you
have administrator privileges for the printer by clicking the Printer properties menu, and then clicking the
Security tab.
• Save Print Log in File
Saves the print log in a file in the CSV format.
• Print Unit Settings
Prints a report containing the current firmware version and device setting information.
When you print this report, we recommend using a 2.4" (62 mm) or wider RD Roll.
• Check Print Head Status
Checks if there are no problems with the print head.
• Reset to Factory Defaults
(TD-4410D) Resets all the settings to the factory settings, including device settings, and transferred data.
(TD-4420DN) Resets all the settings to the factory settings, including device settings, transferred data, and
network settings.
• Reset only Device Settings
77