Sony Cyber-shot 4-130-938-12(1) Handbook page 62

Calibration
Enables you to perform calibration when the touch panel buttons do not react at the appropriate
points where you touch.
1 t (Settings) t [Main Settings] t
t [Calibration] t
2 Using the paint pen, touch the center of the ×
mark displayed on the screen in order.
Notes
• To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that point are not
effected.
• If you fail to touch the right spot, the calibration is not performed. Touch the center of the × mark again.
62 GB