Face Detection: Detecting The Face Of Subject - Sony Cyber-shot 3-700-727-12(1) Handbook

Shooting menu

Face Detection: Detecting the face of subject

Selects whether to use the Face Detection function continuously or when the touch panel is
touched.
Detecting the faces of your subject will also adjust focus, strobe, exposure, white balance, and
pre-strobe for red-eye reduction.
(Continuous)
(When touched)
• When the Face Detection function is activated
– You cannot use the AF illuminator.
– You cannot use the Digital Zoom function.
• In (Soft Snap) mode, the default setting is [Continuous].
• The camera can detect up to 8 subject faces. However, in
4 subject faces.
• When the camera detects more than one subject, the camera will judge which is the main subject and set
focus by priority.
• The frame which the focus is set will turn green by pressing the shutter button half way down. Even when
the frame does not turn green, if the distance of the subject which the focus is set on and other subjects are
the same, the focus is set on all subjects.
• When the shooting mode for still image is a mode other than
Auto), and
• Faces may not be detected correctly when:
– It is too dark or too bright.
– Faces are partially hidden by sunglasses, masks, hats, etc.
– The subjects are not facing the camera.
56
Detects the face the camera is to automatically focus on.
• Touching the face changes the Face Detection frame to the Face
Touch the screen, and if a face is detected, operation is the
same as [Continuous].
(Soft Snap) mode, the Face Detection function is always off.
For details on the operation 1 page 38
Priority frame.
If the subject area you touch is not a face, the section near the
touched area is brought into focus.
(Soft Snap) mode, it can detect only up to
Face Detection mark
Face Priority frame
Face Detection frame
(Auto Adjustment), (Program