Ev: Adjusting The Light Intensity; Focus: Changing The Focus Method; Metering Mode: Selecting The Metering Mode - Sony Cyber-shot 3-700-727-12(1) Handbook

Shooting menu
On the Burst
• When recording with the self timer, a series of a maximum of five images is recorded.
• The recording interval is approximately 0.74 seconds. The recording interval becomes longer, depending
on the setting for the image size.
• When the battery level is low, or when the internal memory or "Memory Stick Duo" is full, the Burst
stops.
• You may not be able to shoot images in the Burst mode depending on the Scene Selection mode (page 43).
• The focus, white balance, and exposure are adjusted for the first image, and these settings are also used for
the other images.
On the Exposure Bracket
• The focus and white balance are adjusted for the first image, and these settings are also used for the other
images.
• When you adjust the exposure manually (page 49), the exposure is shifted based on the adjusted
brightness.
• The recording interval is the same as that for Burst mode, but becomes slower depending on the shooting
conditions.
• If the subject is too bright or too dark, you may not be able to shoot properly with the selected bracket step
value.
• You may not be able to shoot images in the Exposure Bracket mode depending on the Scene Selection
mode (page 43).

EV: Adjusting the light intensity

Manually adjusts the exposure. This menu is the same as the menu that appears when you
touch the EV setting button in

Focus: Changing the focus method

You can change the focus method. Use the menu when it is difficult to get the proper focus in
Auto Focus mode. This menu is the same as the menu that appears when you touch the Focus
setting button in (Program Auto) mode. See page 44.

Metering Mode: Selecting the metering mode

Selects the metering mode that sets which part of the subject to measure to determine the
exposure. This menu is the same as the menu that appears when you touch the Metering Mode
setting button in (Program Auto) mode. See page 47.
For details on the operation 1 page 38
(Program Auto) mode. See page 49.
51