Get started Before using Nokia Pro Wireless Earphones, connect the Micro USB cable to a power source to being charging. When battery is low, the earphones will beep and LED indicator light will ﬂash red. Power on: Press and hold Key for 3 seconds until the LED shows a white light.
Pair and connect with Bluetooth To go into pairing mode > press and hold key for 3 seconds until the LED ﬂashes red and white alternately. Turn on Bluetooth in your device and choose “Nokia Earphones” from the Bluetooth menu to connect. Nokia Earphones Wearing your earphones For optimal ﬁt and audio performance, adjust the ear ﬁn...
Using your earphones Buttons Previous track 2 secs Volume up Play or pause music Activate voice commands Answer or end calls Reject calls 2 secs Switch call to device from 2 secs your earphones Next track 2 secs Volume down Smart Earbuds Function Attrack Seperate...
Product and safety information Remote control functions may vary depending on the model of your device and application. Sound track instructions do not respond to iOS devices. Since devices with Bluetooth wireless technology communicate using radio waves, they do not need to be in direct line-of-sight. Bluetooth devices must, however, be within 10 meters (33 feet) of each other, although the connection may be subject to interference from obstructions such as walls or from other electronic devices.
Hearing Warning: When you use the earphones, your ability to hear outside sounds may be aﬀected. Do not use the earphones where it can endanger your safety. The surface of this product is nickel-free. Small children Your device and its accessories are not toys. They may contain small parts.
Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. Electrical and electronic products contain a lot of valuable materials, including metals (such as copper, aluminium, steel, and magnesium) and precious metals (such as gold, silver, and palladium).
Implanted medical devices To avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 15.3 centimetres (6 inches) between a wireless device and the implanted medical device. Persons who have such devices should: - Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical device.
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.